Opens in a new tab

SMLR5602T1G

NPN bias resistor transistor, 50V, 500mA, R1=R2=1kΩ, SOT-23-3

6893

Effective Inventory

Image for reference only

Manufacturer Part:

SMLR5602T1G

Package:

SOT-23-3 (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi SMLR5602T1G is a bias resistor transistor (BRT) integrating an NPN transistor with built-in bias resistors (R1 = 1 kΩ, R2 = 1 kΩ) in a SOT-23-3 package. Designed for space-efficient digital switching applications, it eliminates external resistors and simplifies PCB layout.

Key Specifications

Polarity NPN
VCEO Max 50 V
IC Max 500 mA
R1 (Input Resistor) 1 kΩ
R2 (Base-Emitter Resistor) 1 kΩ
hFE Min 120
VCE(sat) Max 0.25 V @ Ic=50mA
Operating Temperature -55 °C to +150 °C
Package SOT-23-3

Features

  • Single NPN pre-biased transistor with R1 = R2 = 1 kΩ
  • Low R1 (1 kΩ) enables direct drive from low-voltage logic
  • 500 mA collector current capability
  • Compact SOT-23-3 package
  • Eliminates two external resistors per switching channel
  • Pb-free, RoHS compliant

Applications

  • Relay and solenoid driver circuits
  • LED driver for indicator and backlight
  • Logic-level signal buffering
  • General-purpose switching in consumer electronics
Product Introduction: SMLR5602T1G Product Introduction

The onsemi SMLR5602T1G is a single NPN bias resistor transistor (BRT) that integrates an NPN switching transistor with built-in base bias resistors (R1 = 1 kΩ, R2 = 1 kΩ) in a 3-pin SOT-23 package. The 1 kΩ input resistance is the lowest in the BRT family, providing the highest base drive current for a given input voltage — approximately 4.3 mA from a 5 V logic signal (5V – 0.7V / 1kΩ). Combined with the minimum hFE of 120, this supports collector currents up to 500 mA, making it one of the highest-current BRT options available. The device replaces a discrete transistor plus two external resistors with a single 3-pin component, simplifying schematic design, reducing BOM count, and saving PCB area. It is ideal for relay and solenoid drivers, LED control, and general-purpose digital switching where moderate current capability is needed.

Working Principle: SMLR5602T1G Working Principle

The SMLR5602T1G integrates an NPN transistor with a series base resistor (R1 = 1 kΩ) and a parallel base-emitter shunt resistor (R2 = 1 kΩ) into a single 3-pin device. When a voltage above the turn-on threshold is applied to the input (B) pin, current flows through R1 into the transistor base, turning it on. The low 1 kΩ value of R1 provides high base drive current: at 5 V input, approximately 4.3 mA flows into the base, which with hFE of 120 can support 500 mA of collector current. R2 serves two purposes: (1) it provides a defined turn-off path for base leakage current, ensuring the transistor switches off cleanly when the input goes low; (2) it shunts away thermal leakage current that could cause parasitic turn-on at high temperatures. The 3-pin package (Input, Ground/Emitter, Output/Collector) provides the simplest possible connection: apply logic signal to input, connect emitter to ground, and the collector switches the load.

Pin Description: SMLR5602T1G Pin Definition and Functions
Pin Name Type Function
1 B Input Base input (via R1=1kΩ)
2 E Ground Emitter (ground connection)
3 C Output Collector (load connection)
Application Scenarios: In which products and applications is SMLR5602T1G used
  • Relay and solenoid driver in automotive and industrial control
  • LED indicator and backlight driver
  • MCU I/O expansion for higher-current loads
  • Logic-level signal inversion and buffering
Alternative Models: What chips are recommended as replacements for SMLR5602T1G
Manufacturer Part Number Package Notes
onsemi PDTA143ET SOT-23-3 PNP BRT, R1=4.7kΩ, R2=47kΩ
Rohm BRT12-3T SOT-23-3 NPN BRT, R1=1kΩ, R2=1kΩ
Nexperia PDTD123YT SOT-23-3 NPN BRT, R1=2.2kΩ, R2=47kΩ
Diodes Inc DTC143ZCAHZGT1G SOT-23-3 NPN BRT, R1=4.7kΩ, R2=47kΩ

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1