Opens in a new tab

SN6501DBVT

5V/3.3V push-pull transformer driver, 1A, SOT-23-5

2750

Effective Inventory

Image for reference only

Manufacturer Part:

SN6501DBVT

Package:

SOT-23-5

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN6501DBVT from TI is a push-pull transformer driver for isolated power supply, providing up to 1.5W at 5V or 3.3V input in SOT-23-5 for isolated DC-DC converter designs.

Key Specifications

Package SOT-23-5

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: SN6501DBVT Product Introduction

The SN6501DBVT from TI is a push-pull transformer driver for isolated power supply, providing up to 1.5W at 5V or 3.3V input in SOT-23-5 for isolated DC-DC converter designs.

Working Principle: SN6501DBVT Working Principle

The SN6501DBVT is a push-pull transformer driver from Texas Instruments in SOT-23-5, designed for isolated DC-DC power supplies providing up to 1.5W of isolated power. The device generates a 50% duty-cycle square wave on D1 and D2 (180 degrees out of phase) at approximately 160kHz, driving the center-tapped primary of an external transformer. The push-pull topology naturally cancels the DC bias in the transformer core, preventing saturation and allowing smaller core sizes. The secondary winding produces an AC voltage that is rectified by external Schottky diodes and filtered by capacitors, producing an isolated DC output. For a 3.3V input with a 1:1 transformer, the output is approximately 3.3V (minus diode drops); with a 1:1.5 transformer, approximately 5V. The device includes: (1) Internal oscillator (160kHz +/-20%); (2) Over-temperature shutdown at 165C; (3) Under-voltage lockout at 2.5V; (4) Current limit at 350mA per driver. The quiescent current is 3mA at no load. The isolation voltage depends on the transformer: typical transformers provide 1500-5000Vrms isolation. The -DBVT suffix specifies SOT-23-5, tape-and-reel. Applications include: isolated RS-485/RS-232 transceiver power, isolated ADC power, and medical device isolation barriers.

Pin Description: SN6501DBVT Pin Definition and Functions
Pin Name Type Function
1 VCC Power Input supply (3.0-5.5V, powers internal oscillator and driver)
2 GND Power Ground
3 D2 Output Driver output 2 (connects to transformer primary, 180deg phase from D1)
4 D1 Output Driver output 1 (connects to transformer primary, push-pull drive)
5 NC – No connect
Application Scenarios: In which products and applications is SN6501DBVT used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for SN6501DBVT
    Manufacturer Part Number Package Notes
    Texas Instruments SN6501DBVT SOT-23-5 Same device, TI brand
    Texas Instruments SN6505DBVR SOT-23-5 Higher power version (2W), internal LDO
    Texas Instruments SN6507DGKR VSSOP-8 Programmable frequency, higher power
    Analog Devices LTC3573EMS8#PBF MSOP-8 Isolated DC-DC with integrated LDO, ADI
    Maxim MAX253CPA+ DIP-8 1W isolated RS-485 driver, Maxim brand

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1