Opens in a new tab

SN65HVD08DR

3.3V RS-485 Transceiver, 20Mbps, 1/8 UL, 16kV ESD, SOIC-8

11234

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD08DR

Package:

SOIC-8 (5.0 x 4.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD08DR from Texas Instruments is a 3.3 V RS-485 half-duplex transceiver supporting up to 20 Mbps data rates with 1/8 unit load and 16 kV ESD protection in an SOIC-8 package.

Key Specifications

Type RS-485 Half-Duplex Transceiver
Data Rate Up to 20 Mbps
Supply Voltage 3.3 V
ESD Protection 16 kV HBM on bus pins
Receiver Input Impedance 1/8 Unit Load (96 kOhm min)
Common-Mode Range -7 V to +12 V
Quiescent Current 2 mA (typical)
Package SOIC-8 (5.0 x 4.0 mm)
Operating Temperature -40C to 85C

Features

  • 20 Mbps high-speed data rate
  • 1/8 unit load supports up to 256 nodes
  • 16 kV ESD protection on bus pins
  • 3.3 V single supply
  • Hot-plug capable
  • Pin-compatible with industry-standard 75176

Applications

  • High-speed industrial communication networks
  • Profibus and high-speed Modbus systems
  • Motion control and servo drive links
  • Video and data transmission over balanced lines
  • Multi-drop sensor networks
Product Introduction: SN65HVD08DR Product Introduction

The SN65HVD08DR from Texas Instruments is a 3.3 V RS-485 half-duplex transceiver supporting data rates up to 20 Mbps for high-speed industrial communication. The 1/8 unit load receiver input impedance allows up to 256 transceivers on a single bus. 16 kV HBM ESD protection on the bus pins provides robust handling immunity. The device is hot-plug capable, ensuring bus stability when devices are connected or disconnected under power. Pin compatibility with the industry-standard 75176 transceiver simplifies design migration. The 3.3 V single supply operation matches modern low-voltage MCU logic levels without level translation.

Working Principle: SN65HVD08DR Working Principle

The SN65HVD08DR integrates a differential line driver and a differential line receiver. The driver converts single-ended TTL/CMOS logic on the DI pin to a differential output on the A and B bus pins when DE is high. The receiver converts the differential signal on the A and B pins to a single-ended output on the RO pin when RE is low. In half-duplex mode, DE and RE are tied together for alternating transmit and receive operation. The high 20 Mbps data rate is achieved through optimized driver output transition times and receiver bandwidth. The 1/8 unit load input impedance (96 kOhm minimum) presents minimal loading to the bus, enabling large multi-drop networks. Hot-plug circuitry ensures that the driver and receiver outputs remain in high-impedance during power-up transients, preventing bus disruption.

Pin Description: SN65HVD08DR Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Ground Ground
6 A I/O Non-inverting bus pin
7 B I/O Inverting bus pin
8 VCC Power 3.3V power supply
Application Scenarios: In which products and applications is SN65HVD08DR used
  • Profibus DP high-speed fieldbus at 12 Mbps
  • High-speed Modbus TCP-to-serial gateway communication
  • Servo drive and motion controller feedback links
  • Multi-drop sensor network with 200+ nodes
  • Video surveillance RS-485 control and telemetry
Alternative Models: What chips are recommended as replacements for SN65HVD08DR
Manufacturer Part Number Package Notes
Texas Instruments THVD2450DR SOIC-8 50Mbps, 18kV ESD, same family
Analog Devices MAX3485ESA+ SOIC-8 10Mbps, 3.3V RS-485
STMicroelectronics ST3485EBDR SOIC-8 18Mbps, 3.3V RS-485
Renesas ISL3179EIBZ SOIC-8 30Mbps, 3.3V RS-485
onsemi AM26LV31CDR SOIC-16 Quad RS-422 driver, 3.3V

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1