Opens in a new tab

SN65HVD234DR

3.3V CAN transceiver, 1Mbps, sleep mode 50nA, +/-36V fault protection, SOIC-8, ISO 11898

5375

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD234DR

Package:

SOIC-8 (4.90 x 3.91 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD234DR from Texas Instruments is a 3.3V CAN bus transceiver with sleep mode in a SOIC-8 package. Compliant with ISO 11898-2, it supports data rates up to 1Mbps with +/-36V bus fault protection and 50nA ultra-low sleep current for energy-sensitive applications.

Key Specifications

Supply Voltage 3.0 V to 3.6 V
Data Rate 1 Mbps (max)
Bus Fault Protection +/-36 V
Common-Mode Range -7 V to +12 V
Sleep Current 50 nA (typical)
Standby Current 200 uA (typical)
Operating Temperature -40C to +85C

Features

  • 3.3V single supply with 5V-tolerant LVTTL I/O
  • ISO 11898-2 compliant CAN transceiver
  • +/-36V bus fault protection for harsh environments
  • 50nA ultra-low sleep current for battery-powered nodes
  • Adjustable driver slew rate for EMI optimization
  • 120-node bus support with high input impedance

Applications

  • Industrial automation CAN bus (CANopen, DeviceNet)
  • Building HVAC and temperature control networks
  • Automotive body electronics CAN networks
  • Battery-powered wireless CAN sensor nodes
Product Introduction: SN65HVD234DR Product Introduction

The SN65HVD234DR from Texas Instruments is a 3.3V CAN bus transceiver with ultra-low-power sleep mode in a SOIC-8 package. Compliant with ISO 11898-2 and GIFT/ICT standards, the device provides reliable differential CAN bus communication at data rates up to 1Mbps. The bus pins feature +/-36V fault protection and +/-16kV HBM ESD protection for operation in harsh industrial environments. The extended common-mode range of -7V to +12V ensures reliable communication in the presence of ground shifts. The SN65HVD234 variant features an enable (EN) pin that places the device into an ultra-low-power sleep mode with only 50nA typical current consumption, ideal for battery-powered and always-on CAN nodes. The Rs pin provides three operating modes: high-speed (Rs = GND), slew-rate control (Rs = resistor to GND), and standby/listen-only (Rs = VCC). High input impedance supports up to 120 nodes on the bus. LVTTL I/O pins are 5V tolerant.

Working Principle: SN65HVD234DR Working Principle

The SN65HVD234DR converts between TTL logic levels and CAN bus differential signals. (1) Driver: When the D input is logic low, the driver pulls CANH high and CANL low (domant state). When D is high, both outputs are high-impedance (recessive state). The driver output is controlled by the EN pin – driving EN low disables the driver. (2) Receiver: The receiver detects the differential voltage between CANH and CANL. If V(CANH) – V(CANL) >= 0.9V, the R output is low (dominant). If V(CANH) – V(CANL) <= 0.5V, R is high (recessive). The receiver remains active in standby mode for listen-only operation. (3) Slew Rate: The Rs pin controls driver slew rate. Rs = GND enables fastest transitions. A resistor to GND limits the slew rate to reduce EMI. Rs = VCC enters standby mode. (4) Sleep Mode: When EN is driven low, both driver and receiver are disabled. The 50nA sleep current makes this suitable for battery-powered nodes that wake on bus activity.

Pin Description: SN65HVD234DR Pin Definition and Functions
Pin Name Type Function
1 D Input Driver data input (TTL/CMOS)
2 GND Ground Ground
3 VCC Power 3.3V supply
4 R Output Receiver data output
5 EN Input Enable (high = normal, low = sleep)
6 CANL I/O CAN bus low line
7 CANH I/O CAN bus high line
8 Rs Input Slew rate control / standby select
Application Scenarios: In which products and applications is SN65HVD234DR used
  • Industrial automation CAN bus with +/-36V fault protection and 1Mbps rate
  • Building HVAC and temperature control networks at 3.3V supply
  • Automotive body electronics CAN networks with slew rate control
  • Battery-powered CAN sensor nodes with 50nA sleep mode
Alternative Models: What chips are recommended as replacements for SN65HVD234DR
Manufacturer Part Number Package Notes
TI SN65HVD230DR SOIC-8 Loopback mode variant
TI SN65HVD235DR SOIC-8 Autobaud loopback variant
TI TCAN334GDR SOIC-8 3.3V CAN FD, 5Mbps
NXP TJA1043T/1J SOIC-8 3.3V/5V CAN, sleep mode

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1