Opens in a new tab

SN65HVD75DR

3.3V half-duplex RS-485 transceiver, 20Mbps, IEC ±12kV ESD, 200+ nodes, SOIC-8

7634

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD75DR

Package:

SOIC-8 (3.91 x 4.9 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD75DR from Texas Instruments is a 3.3 V half-duplex RS-485 transceiver with IEC ESD protection, supporting data rates up to 20 Mbps in an SOIC-8 package. It features ±12 kV IEC 61000-4-2 contact discharge protection, 80 mV receiver hysteresis for noise rejection, and low 2 μA standby current, supporting over 200 bus nodes for demanding industrial communication networks.

Key Specifications

Supply Voltage 3.3 V (nominal)
Signaling Rate 20 Mbps
Duplex Half-duplex
IEC ESD (Contact) ±12 kV
Receiver Hysteresis 80 mV (typical)
Common-Mode Range -7 V to +12 V
Number of Nodes >200 (1/8 unit load)
Standby Current < 2 μA
Operating Temperature -40°C to +125°C

Features

  • IEC 61000-4-2 ESD protection: ±12 kV contact, ±4 kV fast transient burst
  • Large receiver hysteresis (80 mV) for superior noise rejection on long bus runs
  • Low unit loading allows over 200 connected nodes on a single bus
  • 5 V tolerant logic inputs compatible with 3.3 V or 5 V controllers
  • Glitch-free power-up and power-down on bus inputs and outputs

Applications

  • Industrial automation and process control RS-485 networks
  • Building automation and HVAC communication buses
  • Motor drive and inverter communication interfaces
  • Utility metering and smart grid data links
  • Security and access control system networks
Product Introduction: SN65HVD75DR Product Introduction

The SN65HVD75DR from Texas Instruments is a robust 3.3 V half-duplex RS-485 transceiver designed for demanding industrial communication applications. The device combines a differential driver and differential receiver operating from a single 3.3 V supply, with internally connected driver outputs and receiver inputs forming a bus port for two-wire half-duplex communication. It supports data rates up to 20 Mbps with a wide common-mode voltage range of -7 V to +12 V for multi-point applications over long cable runs. The bus pins provide high-level ESD protection to ±12 kV IEC 61000-4-2 contact discharge and ±4 kV IEC 61000-4-4 fast transient burst. Receiver hysteresis of 80 mV ensures reliable data reception in noisy environments.

Working Principle: SN65HVD75DR Working Principle

The SN65HVD75DR integrates a differential driver and receiver with shared bus pins for half-duplex operation. (1) Driver Section: The driver converts single-ended TTL/CMOS logic (D input) into differential RS-485 signals (A, B) with controlled slew rate for 20 Mbps operation. The driver output is enabled by the DE pin and features short-circuit current limiting (±160 mA) and thermal shutdown at 170°C. (2) Receiver Section: The receiver detects differential signals above the threshold (VIT+ = -20 mV, VIT- = -150 mV) with 80 mV hysteresis, converting them to single-ended logic at the R output. The receiver is enabled by pulling RE low. (3) Bus Protection: Integrated ESD clamps on A and B pins protect against IEC 61000-4-2 contact discharge up to ±12 kV and HBM up to ±15 kV. Fault protection covers -13 V to +16.5 V on the bus pins. (4) Power Management: In standby mode (DE low, RE high), supply current drops below 2 μA. Active quiescent current is less than 1 mA.

Pin Description: SN65HVD75DR Pin Definition and Functions
Pin Name Type Function
1 R Output Receiver data output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 D Input Driver data input
5 GND Ground Device ground
6 A I/O RS-485 bus non-inverting I/O
7 B I/O RS-485 bus inverting I/O
8 VCC Power 3.3 V supply voltage
Application Scenarios: In which products and applications is SN65HVD75DR used
  • Industrial automation RS-485 networks (Modbus, Profibus) with robust ESD protection
  • Building automation and HVAC communication buses over long cable runs
  • Motor drive and inverter communication interfaces with high noise immunity
  • Utility metering and smart grid data links requiring 200+ node connectivity
  • Security and access control system networks in electrically harsh environments
Alternative Models: What chips are recommended as replacements for SN65HVD75DR
Manufacturer Part Number Package Notes
Texas Instruments SN65HVD72DR SOIC-8 250kbps, lower speed
Texas Instruments SN65HVD78DR SOIC-8 50Mbps, higher speed
Analog Devices ADM3075EARZ SOIC-8 3.3V, 20Mbps RS-485
Maxim Integrated MAX3485ECSA+ SOIC-8 3.3V, 10Mbps, ESD protected
Renesas ISL3179EIBZ SOIC-8 3.3V, 20Mbps, ±16.5kV ESD

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1