Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » SN65LBC172A16DWR

SN65LBC172A16DWR

Quad RS-485 driver, 30Mbps, 12kV ESD, SOIC-16DW

2521

Effective Inventory

Image for reference only

Manufacturer Part:

SN65LBC172A16DWR

Package:

SOIC-16 Wide (10.3 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN65LBC172A16DWR from Texas Instruments is a quadruple RS-485 differential line driver, designed for high-speed multipoint data transmission up to 30 Mbps with enhanced 12 kV ESD protection.

Key Specifications

Manufacturer Texas Instruments
Protocol TIA/EIA-485, TIA/EIA-422
Drivers 4
Data Rate Up to 30 Mbps
Propagation Delay <11 ns
Standby Current 1.5 mA max
ESD Protection 12 kV (bus pins)
Common-Mode Range -7V to +12V
Supply Voltage 5V
Package SOIC-16 (DW)
Operating Temperature -40°C to +85°C

Features

  • 4 differential line drivers
  • RS-485/RS-422 compliant
  • 30 Mbps data rate
  • 12 kV ESD on bus pins
  • Thermal shutdown protection
  • Driver current limiting
  • Power-up/down glitch-free
  • Pin-compatible with SN75172, AM26LS31

Applications

  • Motor drive communication
  • Factory automation
  • Industrial networking
  • Multipoint data buses
Product Introduction: SN65LBC172A16DWR Product Introduction

The SN65LBC172A16DWR from Texas Instruments is a quadruple RS-485 differential line driver supporting data rates up to 30 Mbps. It features 12 kV ESD protection on bus pins, thermal shutdown, and driver output current limiting for robust operation in industrial environments. The LinBiCMOS process combines bipolar precision with CMOS efficiency. The 16-pin SOIC (DW) package supports standard surface-mount assembly.

Working Principle: SN65LBC172A16DWR Working Principle

Each of the four drivers converts single-ended TTL/CMOS logic levels into differential RS-485/422 signals. The differential output provides high noise immunity for long cable runs. Driver outputs feature current limiting and thermal shutdown for fault protection. The wide -7V to +12V common-mode range allows communication despite ground potential differences between nodes.

Pin Description: SN65LBC172A16DWR Pin Definition and Functions
Pin Group Name Function
1-4 1A-4A Driver inputs
5,12 GND Ground
6,8,11,14 Y/Z outputs Differential outputs
7,15 EN, /EN Driver enables
9,10 VCC 5V supply
Application Scenarios: In which products and applications is SN65LBC172A16DWR used
  • Industrial fieldbus networks
  • Motor drive and inverter communication
  • Factory automation and control
  • Multipoint data transmission
Alternative Models: What chips are recommended as replacements for SN65LBC172A16DWR
Manufacturer Part Number Notes
TI SN75LBC172ADWR Commercial temp range
TI AM26LS31CDR Quad RS-422 driver

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1