Opens in a new tab

Home » Audio ICs, Integrated Circuits ICs » SN74AHCT273DBR

SN74AHCT273DBR

Octal D-type flip-flop, 3-state, TTL-level, SO-20

3807

Effective Inventory

Image for reference only

Manufacturer Part:

SN74AHCT273DBR

Package:

See datasheet

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

SN74AHCT273DBR is an octal D-type edge-triggered flip-flop with clear, SSOP-20 package.

Key Specifications

Function Octal D-type flip-flop with clear
Supply Voltage 4.5V to 5.5V
Propagation Delay 10 ns
Trigger Edge-triggered (rising edge)
Package SSOP-20
Features Active-low clear

Features

  • 8-bit edge-triggered D flip-flop
  • Active-low clear input
  • 10ns propagation delay
  • SSOP-20 compact package
  • AHCT logic for 5V TTL compatibility

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: SN74AHCT273DBR Product Introduction

SN74AHCT273DBR is an octal D-type edge-triggered flip-flop with clear, SSOP-20 package.

Working Principle: SN74AHCT273DBR Working Principle

The SN74AHCT273DBR is a Texas Instruments logic or interface device implementing standard digital functions (buffers, gates, level shifters, or bus transceivers). CMOS or BiCMOS logic gates process input signals with propagation delays specified per the logic family. Input hysteresis (on Schmitt-trigger variants) improves noise immunity. Partial power-down Ioff circuitry prevents backflow current when the device is powered down. Direction control and output enable pins manage bus arbitration in multi-master systems.

Pin Description: SN74AHCT273DBR Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is SN74AHCT273DBR used
  • Level translation between voltage domains
  • Bus buffering and isolation
  • Glue logic in digital systems
  • Signal conditioning and squaring
Alternative Models: What chips are recommended as replacements for SN74AHCT273DBR
Model Manufacturer Key Difference
NCV4275 ON Semi Equivalent LDO function
AP2112 Diodes Inc Low-cost LDO alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1