Opens in a new tab

SN74LS193N

4-bit up/down binary counter, separate CU/CD, async CLR/LOAD, CO/BO, PDIP-16

3800

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS193N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS193N from Texas Instruments is a 4-bit synchronous up/down binary counter with separate up and down clock inputs, asynchronous clear and load, and borrow/carry outputs for cascading in a 16-pin PDIP package.

Key Specifications

Function 4-bit synchronous up/down binary counter
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V (5V nominal)
Count Range 0 to 15 (4-bit binary)
Clock Inputs CU (count up) and CD (count down), falling-edge triggered
Asynchronous Clear (CLR) Active-high, resets count to 0000
Asynchronous Load (LOAD) Active-low, loads D inputs to Q outputs
Data Inputs D0-D3 (parallel load)
Carry Output (CO) Goes LOW when count=15 and CU goes LOW
Borrow Output (BO) Goes LOW when count=0 and CD goes LOW
Maximum Clock Frequency 25MHz typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • 4-bit synchronous up/down binary counter
  • Separate up and down clock inputs
  • Asynchronous parallel load
  • Asynchronous clear
  • Carry and borrow outputs for cascading
  • Count in either direction independently

Applications

  • Up/down counting
  • Position tracking (motor encoder)
  • Frequency division
  • Digital potentiometer control
  • Programmable timer/counter
Product Introduction: SN74LS193N Product Introduction

The SN74LS193N from Texas Instruments is a 4-bit synchronous up/down binary counter that counts from 0 to 15 in either direction. The unique feature is separate count-up (CU) and count-down (CD) clock inputs, both falling-edge triggered: a HIGH-to-LOW transition on CU increments the count, and a HIGH-to-LOW transition on CD decrements it. The unused clock input must be held HIGH. The asynchronous clear (CLR) input resets the count to 0000 when HIGH, regardless of the clocks. The asynchronous load (LOAD) input, when LOW, transfers the parallel data inputs (D0-D3) to the outputs (Q0-Q3), allowing presetting the count to any value. The carry output (CO) goes LOW when the count reaches 15 and CU goes LOW, and the borrow output (BO) goes LOW when the count reaches 0 and CD goes LOW. These outputs enable cascading: CO connects to the CU of the next stage, and BO connects to the CD of the next stage, for multi-decade or multi-digit counting. The N suffix denotes the PDIP-16 through-hole package.

Working Principle: SN74LS193N Working Principle

The SN74LS193N counts in binary from 0000 (0) to 1111 (15). On the falling edge of CU (count-up clock), the count increments by 1; on the falling edge of CD (count-down clock), it decrements by 1. The unused clock input must be held HIGH to prevent spurious counting. The counter wraps around: incrementing past 1111 returns to 0000, and decrementing below 0000 wraps to 1111. The carry output (CO) provides a LOW pulse when the count is 1111 and CU goes LOW; this connects to the CU input of the next higher-order counter, enabling it to count once per 16 counts of the lower counter. Similarly, the borrow output (BO) provides a LOW pulse when the count is 0000 and CD goes LOW, cascading the down-count to the next stage. The asynchronous clear (CLR) forces the count to 0000 when HIGH, regardless of clock or load inputs. The asynchronous load (LOAD) transfers D0-D3 to Q0-Q3 when LOW, allowing the count to be preset to any value. For example, loading 1001 (9) and counting up gives 6 more counts before wrapping, creating a divide-by-6 counter. The 193 is fully synchronous within each stage (all four bits change simultaneously), but cascading between stages is ripple (asynchronous).

Pin Description: SN74LS193N Pin Definition and Functions
Pin Name Type Description
1 CO Output Carry output (LOW when count=15 and CU=LOW)
2 CD Input Count-down clock (falling edge triggered, hold HIGH when not counting down)
3 Q3 Output Count output bit 3 (MSB)
4 Q2 Output Count output bit 2
5 Q1 Output Count output bit 1
6 Q0 Output Count output bit 0 (LSB)
7 CU Input Count-up clock (falling edge triggered, hold HIGH when not counting up)
8 GND Power Ground
9 D0 Input Parallel data input bit 0 (LSB)
10 D1 Input Parallel data input bit 1
11 D2 Input Parallel data input bit 2
12 D3 Input Parallel data input bit 3 (MSB)
13 BO Output Borrow output (LOW when count=0 and CD=LOW)
14 CLR Input Asynchronous clear (active HIGH, resets to 0000)
15 LOAD Input Asynchronous load (active LOW, loads D0-D3 to Q0-Q3)
16 VCC Power Supply (4.75V to 5.25V)
Application Scenarios: In which products and applications is SN74LS193N used
  • Position Counter: Motor encoder A→CU, B→CD; counts up on CW, down on CCW; Q0-Q3 = 4-bit position
  • 8-Bit Counter: Two 193s cascaded; CO→CU of next, BO→CD of next; 0-255 count range
  • Divide-by-N: Load N, count up to 15; CO triggers LOAD; divides clock by (16-N)
  • Up/Down Timer: Load initial value; CU increments toward 15, CD decrements toward 0; BO/CO detect endpoints
  • Digital Pot: CU/CD from buttons; Q0-Q3 drive R-2R DAC; each press adjusts voltage up or down
Alternative Models: What chips are recommended as replacements for SN74LS193N
Model Manufacturer Key Difference Package Supply
74LS193N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS193D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC193D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC193N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT193D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT193N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74193 is a 4-Bit Binary Counter (Up/Down). Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1