Opens in a new tab

SN74LS20N

Dual 4-input NAND gate, LS TTL, 15ns, PDIP-14

6000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS20N

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS20N from Texas Instruments contains two independent 4-input positive NAND gates in a 14-pin PDIP package — essential for implementing wide AND/NAND logic functions with minimal chip count.

Key Specifications

Number of Gates 2 (dual 4-input NAND)
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Propagation Delay 15ns typical @ 5V
Output Drive (IOL/IOH) 8mA / -0.4mA
Operating Temperature 0°C to +70°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Dual 4-input NAND gates
  • LS TTL technology
  • 15ns typical propagation delay
  • Industry-standard 7420 pinout

Applications

  • 4-input AND function (NAND + inverter)
  • Address decoding with 4 conditions
  • Multi-condition gating
  • General-purpose logic
Product Introduction: SN74LS20N Product Introduction

The SN74LS20N from Texas Instruments contains two independent 4-input NAND gates in a 14-pin PDIP package. Each gate performs Y = NOT(A AND B AND C AND D); the output is LOW only when ALL four inputs are HIGH. This 4-input NAND is valuable for address decoding and multi-condition gating where four signals must all be HIGH (or a combination of HIGH/LOW with inverters) to produce an active output. A 4-input AND function is obtained by adding an inverter after the NAND. Without the 7420, implementing a 4-input AND would require cascading two 2-input AND gates (7408) plus an extra gate — three gates versus one. DeMorgan’s theorem shows that a 4-input NAND is also equivalent to NOT-A OR NOT-B OR NOT-C OR NOT-D, making it useful for detecting when ANY input is LOW. The N suffix denotes the PDIP-14 through-hole package.

Working Principle: SN74LS20N Working Principle

Each 4-input NAND gate performs Y = (A · B · C · D)’ — the output is LOW only when all four inputs A, B, C, and D are simultaneously HIGH. If any input is LOW, the output is HIGH. Truth table for one gate: 16 possible input combinations, only one (1111) produces LOW output. The NAND is a universal gate: any Boolean function can be implemented using only NAND gates. For a 4-input AND: Y = (A·B·C·D)” = A·B·C·D — add an inverter (7404 or one input of a NAND gate with tied inputs) after the 4-input NAND. For address decoding: if a memory device must be selected when A15=1, A14=1, A13=1, and MREQ=0, connect A15,A14,A13,MREQ’ (inverted) to the four inputs; the NAND output goes LOW only when all conditions are met (active-LOW chip select). The 15ns propagation delay means the output responds within 15ns of any input change.

Pin Description: SN74LS20N Pin Definition and Functions
Pin Name Type Description
1 1A Input Gate 1 input A
2 1B Input Gate 1 input B
3 NC — No connect
4 1C Input Gate 1 input C
5 1D Input Gate 1 input D
6 1Y Output Gate 1 output (NAND)
7 GND Power Ground
8 2Y Output Gate 2 output (NAND)
9 2A Input Gate 2 input A
10 2B Input Gate 2 input B
11 NC — No connect
12 2C Input Gate 2 input C
13 2D Input Gate 2 input D
14 VCC Power Supply (5V)

SN74LS20N uses the PDIP-14 package with standard 74LS TTL pinout: VCC at Pin 14, GND at Pin 7. Each NAND gate has four inputs and one output — Gate 1: Pins 1-4 (inputs), Pin 6 (output); Gate 2: Pins 9-12 (inputs), Pin 8 (output). Pins 5 and 13 are not connected. The LS technology provides typical propagation delay of 15ns and power dissipation of 2mW per gate. For push-pull active pull-up outputs, use SN74HC20N or SN74HCT20N which maintain the same pinout. The 74ALS20 provides lower power at similar speed as an advanced alternative.

Application Scenarios: In which products and applications is SN74LS20N used
  • 4-Input AND: 4 signals → 7420 NAND → 7404 inverter → active-HIGH when all 4 inputs are HIGH
  • Chip Select Decode: A15, A14, A13, MREQ’ → 7420 → active-LOW chip select; LOW only when all 4 are HIGH
  • Multi-Condition Enable: System OK = PowerGood AND NoFault AND NoOvertemp AND NoAlarm; 4 signals → NAND → inverter → active-HIGH system OK
  • 5+ Input AND: Combine 7420 output with 5th input in 7400 NAND → inverter; 5-input AND
Alternative Models: What chips are recommended as replacements for SN74LS20N
Model Manufacturer Key Difference Package Supply
74LS20N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-14 5V TTL
74LS20D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-14 5V TTL
74HC20D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-14 2-6V CMOS
74HC20N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-14 2-6V CMOS
74HCT20D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-14 4.5-5.5V TTL-in
74HCT20N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-14 4.5-5.5V TTL-in
74AC20D TI/Nexperia Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC) SOIC-14 2-6V CMOS
74AC20N TI/Nexperia Through-hole DIP version of AC family for prototyping and repair DIP-14 2-6V CMOS
74LVC20D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-14 1.65-3.6V CMOS
74LVC20N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-14 1.65-3.6V CMOS

The 7420 is a Dual 4-Input NAND Gate. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1