Opens in a new tab

SN74LS32N

Quad 2-input OR gate, LS TTL, 14ns, PDIP-14

7000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS32N

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS32N from Texas Instruments is a quad 2-input positive OR gate with LS TTL technology, 14ns propagation delay, and industry-standard 7432 pinout in a 14-pin PDIP package.

Key Specifications

Number of Gates 4 (quad 2-input OR)
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V (5V nominal)
Propagation Delay 14ns typical @ 5V
Output Drive (IOL/IOH) 8mA / -0.4mA
Operating Temperature 0°C to +70°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Four independent 2-input OR gates
  • LS TTL technology
  • 14ns typical propagation delay
  • Industry-standard 7432 pinout

Applications

  • Signal combining (any-input-active detection)
  • Interrupt request lines
  • Error flag combination
  • Active-HIGH logic merging
Product Introduction: SN74LS32N Product Introduction

The SN74LS32N from Texas Instruments contains four independent 2-input OR gates in a 14-pin PDIP package. Each gate performs Y = A OR B; the output is HIGH when either or both inputs are HIGH, and LOW only when both inputs are LOW. The OR gate is the natural complement of the AND gate: while AND requires all inputs to be active, OR requires any input to be active. This makes the 7432 ideal for combining multiple active-HIGH signals: interrupt request lines, error flags, or enable signals. When any one of multiple sources needs to trigger an action, the OR gate combines them into a single output. The N suffix denotes the PDIP-14 through-hole package.

Working Principle: SN74LS32N Working Principle

Each OR gate in the SN74LS32N performs Y = A OR B. The truth table is: 00→0, 01→1, 10→1, 11→1. The output is HIGH when at least one input is HIGH. The OR can be constructed from NAND gates using DeMorgan’s theorem: A OR B = NOT(NOT-A AND NOT-B) = NAND(NAND(A,A), NAND(B,B)), but the dedicated 7432 is simpler and faster. For active-LOW signals (where LOW means active), use a NAND gate instead: if two active-LOW interrupt lines /INT1 and /INT2 need to be combined, NAND gives an active-LOW output when either input is LOW, which is the OR function in negative logic. The OR gate is also used in sum-of-products logic: A OR B = A+B in Boolean algebra, where + represents OR.

Pin Description: SN74LS32N Pin Definition and Functions
Pin Name Type Description
1 1A Input Gate 1 input A
2 1B Input Gate 1 input B
3 1Y Output Gate 1 output (OR)
4 2A Input Gate 2 input A
5 2B Input Gate 2 input B
6 2Y Output Gate 2 output (OR)
7 GND Power Ground
8 3Y Output Gate 3 output (OR)
9 3A Input Gate 3 input A
10 3B Input Gate 3 input B
11 4Y Output Gate 4 output (OR)
12 4A Input Gate 4 input A
13 4B Input Gate 4 input B
14 VCC Power Supply (4.75V to 5.25V)
Application Scenarios: In which products and applications is SN74LS32N used
  • Interrupt Combine: /INT1 and /INT2 are active-HIGH; OR combines them; any interrupt triggers MCU
  • Error Flag: Over-temp OR over-current OR over-voltage → single ERROR output; any fault triggers shutdown
  • Clock Select: CLK_A or CLK_B → single output; one at a time (mutually exclusive clocks)
  • Enable OR: Manual-enable OR software-enable; either one activates the circuit
Alternative Models: What chips are recommended as replacements for SN74LS32N
Model Manufacturer Key Difference Package Supply
74LS32N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-14 5V TTL
74LS32D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-14 5V TTL
74HC32D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-14 2-6V CMOS
74HC32N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-14 2-6V CMOS
74HCT32D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-14 4.5-5.5V TTL-in
74HCT32N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-14 4.5-5.5V TTL-in
74AC32D TI/Nexperia Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC) SOIC-14 2-6V CMOS
74AC32N TI/Nexperia Through-hole DIP version of AC family for prototyping and repair DIP-14 2-6V CMOS
74LVC32D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-14 1.65-3.6V CMOS
74LVC32N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-14 1.65-3.6V CMOS

The 7432 is a Quad 2-Input OR Gate. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1