Opens in a new tab

SN74LS86N

Quad 2-input XOR gate, LS TTL, 14ns, PDIP-14

5200

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS86N

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS86N from Texas Instruments is a quad 2-input exclusive-OR (XOR) gate with LS TTL technology, 14ns propagation delay, and industry-standard 7486 pinout in a 14-pin PDIP package.

Key Specifications

Number of Gates 4 (quad 2-input XOR)
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V (5V nominal)
Propagation Delay 14ns typical @ 5V
Output Drive (IOL/IOH) 8mA / -0.4mA
Operating Temperature 0°C to +70°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Four independent 2-input XOR gates
  • LS TTL technology
  • 14ns typical propagation delay
  • Industry-standard 7486 pinout

Applications

  • Parity generation and checking
  • Two’s complement subtraction (with adder)
  • Controlled inversion
  • Comparator circuits
  • Frequency doubling
Product Introduction: SN74LS86N Product Introduction

The SN74LS86N from Texas Instruments contains four independent 2-input exclusive-OR (XOR) gates in a 14-pin PDIP package. Each gate performs the Boolean function Y = A XOR B; the output is HIGH when the inputs are different (01 or 10) and LOW when they are the same (00 or 11). The XOR gate is essential for arithmetic circuits: in an adder, XOR generates the sum bit; in a subtractor, XOR complements the subtrahend under control of a mode signal. When one input is used as a control, the XOR acts as a controlled inverter: if the control is HIGH, the data is inverted; if LOW, the data passes through unchanged. The XOR also serves as a 1-bit comparator: the output is HIGH when the two inputs differ. The N suffix denotes the PDIP-14 through-hole package.

Working Principle: SN74LS86N Working Principle

Each XOR gate in the SN74LS86N performs Y = A XOR B = A ⊕ B. The truth table is: 00→0, 01→1, 10→1, 11→0. The output is HIGH when exactly one input is HIGH (exclusive OR). This is equivalent to Y = (A AND NOT-B) OR (NOT-A AND B), or more compactly Y = A ⊕ B. The XOR can also be expressed as Y = (A OR B) AND NOT(A AND B), which is OR minus AND. When input B is used as a control signal: if B=0, Y=A (data passes through); if B=1, Y=NOT-A (data is inverted). This controlled inversion is the basis for two’s complement subtraction: to compute A-B, set the control to 1 (complementing B) and feed the result into an adder with carry-in = 1. For parity generation, XOR all data bits together; the result is the parity bit. For parity checking, XOR all data bits plus the parity bit; if the result is 1, a parity error has occurred.

Pin Description: SN74LS86N Pin Definition and Functions
Pin Name Type Description
1 1A Input Gate 1 input A
2 1B Input Gate 1 input B
3 1Y Output Gate 1 output (XOR)
4 2A Input Gate 2 input A
5 2B Input Gate 2 input B
6 2Y Output Gate 2 output (XOR)
7 GND Power Ground
8 3Y Output Gate 3 output (XOR)
9 3A Input Gate 3 input A
10 3B Input Gate 3 input B
11 4Y Output Gate 4 output (XOR)
12 4A Input Gate 4 input A
13 4B Input Gate 4 input B
14 VCC Power Supply (4.75V to 5.25V)
Application Scenarios: In which products and applications is SN74LS86N used
  • Controlled Inverter: B input = SUB control; when B=1, output = NOT-A (invert for subtraction); when B=0, output = A (pass for addition)
  • Parity Generator: XOR all 8 data bits together; output is even parity bit; detect single-bit errors
  • Bit Comparator: XOR corresponding bits of two words; if all XOR outputs = 0, the words are equal
  • Frequency Doubler: Feed signal to one input, delayed version to other; output pulses on every edge
  • Adder Sum: XOR of A and B gives sum bit (without carry); pair with AND for carry = half adder
Alternative Models: What chips are recommended as replacements for SN74LS86N
Model Manufacturer Key Difference Package Supply
74LS86N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-14 5V TTL
74LS86D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-14 5V TTL
74HC86D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-14 2-6V CMOS
74HC86N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-14 2-6V CMOS
74HCT86D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-14 4.5-5.5V TTL-in
74HCT86N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-14 4.5-5.5V TTL-in
74AC86D TI/Nexperia Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC) SOIC-14 2-6V CMOS
74AC86N TI/Nexperia Through-hole DIP version of AC family for prototyping and repair DIP-14 2-6V CMOS
74LVC86D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-14 1.65-3.6V CMOS
74LVC86N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-14 1.65-3.6V CMOS

The 7486 is a Quad 2-Input Exclusive-OR Gate. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1