Product Overview
The Texas Instruments SN74LVC1G125DBVR is a single bus buffer gate with 3-state output in a 5-pin SOT-23 (DBV) package. Operating from 1.65V to 5.5V VCC, it features an active-low output enable, overvoltage-tolerant inputs, and Ioff support. The 3-state output enables bus sharing and multiplexing applications.
Key Specifications
| Logic Type | Buffer/Driver with 3-State |
| Number of Channels | 1 |
| VCC Range | 1.65V to 5.5V |
| Max Propagation Delay | 3.2ns at 3.3V |
| Output Drive | ±24mA at 3.3V |
| Output Enable | Active-Low (OE) |
| ICC (Max) | 10uA |
| Ioff | Yes |
| Package | SOT-23-5 (DBV) |
| Operating Temperature | -40°C to +125°C |
Features
- Single buffer with 3-state output
- Active-low output enable (OE)
- Bus buffering and isolation
- I/O port expansion
- Level translation on buses
- Hot-swap and live insertion
- Multiplexed signal routing
- Shared bus isolation for I2C/SPI multiplexing
- Hot-swap card buffer for live insertion
- Level translation between logic voltage domains
- I/O port expansion and signal routing
- Power sequencing control with OE pin
Applications
Product Introduction: SN74LVC1G125DBVR Product Introduction
The TI SN74LVC1G125DBVR is a single bus buffer gate with 3-state output controlled by an active-low output enable (OE) pin in SOT-23-5 package. Operating from 1.65V to 5.5V, it provides bus isolation and multiplexing capabilities with overvoltage-tolerant inputs. The Ioff feature supports live insertion and partial power-down applications.
Working Principle: SN74LVC1G125DBVR Working Principle
The SN74LVC1G125DBVR implements a non-inverting buffer with 3-state output control. When OE is low, the output follows the input (Y = A). When OE is high, the output is in a high-impedance (Hi-Z) state, effectively disconnecting from the bus. This enables multiple devices to share a common bus without contention. The Ioff circuitry ensures the output is disabled when VCC is 0V, preventing backflow current during hot-swap or partial power-down scenarios.
Pin Description: SN74LVC1G125DBVR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | Input | Output enable (active low) |
| 2 | A | Input | Data input |
| 3 | GND | Power | Ground |
| 4 | Y | Output | Buffer output (3-state) |
| 5 | VCC | Power | Positive supply (1.65-5.5V) |
Application Scenarios: In which products and applications is SN74LVC1G125DBVR used
Alternative Models: What chips are recommended as replacements for SN74LVC1G125DBVR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | SN74LVC1G126DBVR | SOT-23-5 | Active-high OE version |
| TI | SN74LVC1G125DCKR | SC-70-5 | Same function, smaller pkg |
| NXP | 74LVC1G125GW | TSSOP-5 | Equivalent function |
| onsemi | NC7SZ125M5X | SOT-23-5 | Equivalent |
| TI | SN74AUP1G125DBVR | SOT-23-5 | Ultra-low power version |
Recommend Parts

IN STOCK: 6768pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 12628pcs
Cargo cycle: 3-7 Days
The minimum order is 1

AC0603JR-070RL
Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)
Brand: Yageo
Package: 0603 (1608 Metric)
IN STOCK: 100000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

LMR34206FSC5RNXRQ1
42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563
Brand: TI
Package: SOT-563 (1.6 x 1.2 x 0.55mm)
IN STOCK: 6500pcs
Cargo cycle: 3-7 Days
The minimum order is 1








