Opens in a new tab

Home » Thyristors » SN74LVC1G74DCU

SN74LVC1G74DCU

Single positive-edge-triggered D-type flip-flop with clear/preset, 1.65-5.5V, 200MHz, 5.9ns delay, VSSOP-8

2341

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC1G74DCU

Package:

VSSOP-8 (SOT-765)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LVC1G74DCU is a single positive-edge-triggered D-type flip-flop with clear and preset from Texas Instruments. Designed for operation from 1.65V to 5.5V, this device features balanced outputs, over-voltage tolerant inputs, partial power-down mode (Ioff), and very high speed with propagation delays as low as 5.9ns. The DCU variant comes in the VSSOP-8 NanoFree package, making it ideal for space-constrained applications including servers, LED displays, network switches, telecom infrastructure, and motor drivers.

Key Specifications

Manufacturer Texas Instruments
Product Category D-Type Flip-Flop
Logic Family LVC
Number of Channels 1
Trigger Type Positive Edge-Triggered
Supply Voltage Range 1.65V to 5.5V
Maximum Clock Frequency 200 MHz
Propagation Delay (tpd) 5.9 ns max @ 3.3V
Output Current (IOL/IOH) 32 mA / -32 mA
Supply Current (max) 10 μA
Input Type Standard CMOS (5.5V tolerant)
Output Type Push-Pull
Operating Temperature -40°C to +125°C
Package VSSOP-8 (DCU)
Features Ioff partial power-down, Schmitt inputs

Features

  • Single D-type positive-edge-triggered flip-flop
  • Asynchronous preset (PRE) and clear (CLR) inputs
  • Wide operating voltage: 1.65V to 5.5V
  • Inputs accept voltages up to 5.5V (over-voltage tolerant)
  • High speed: max 5.9ns propagation delay at 3.3V
  • High clock frequency: up to 200 MHz
  • ±24mA output drive at 3.3V
  • Low power: max 10μA Icc
  • Ioff supports live insertion and partial power-down
  • Latch-up performance exceeds 100mA (JESD 78 Class II)
  • ESD protection: 2000V HBM, 200V MM, 1000V CDM
  • NanoFree VSSOP-8 package
  • -40°C to +125°C operating range

Applications

  • Servers and data center equipment
  • LED display drivers
  • Network switches and routers
  • Telecommunications infrastructure
  • Motor driver circuits
  • I/O expander applications
  • Data synchronization and storage
  • Digital logic systems
Product Introduction: SN74LVC1G74DCU Product Introduction

The SN74LVC1G74DCU is a single positive-edge-triggered D-type flip-flop with asynchronous preset (PRE) and clear (CLR) inputs, manufactured by Texas Instruments as part of their LVC (Low-Voltage CMOS) logic family. Housed in the compact VSSOP-8 NanoFree package, this device operates over a wide supply voltage range of 1.65V to 5.5V, making it suitable for mixed-voltage systems. The flip-flop stores data at the D input that meets setup and hold time requirements on the rising edge of the clock pulse, transferring it to the Q output. The complementary Q bar output is also provided. The asynchronous PRE and CLR inputs override all other inputs when pulled low, allowing direct set/reset control. Key features include over-voltage tolerant inputs (accepting up to 5.5V regardless of Vcc), Ioff circuitry for partial power-down applications supporting live insertion, and very low power consumption of only 10μA maximum. With up to 200 MHz clock frequency and only 5.9ns maximum propagation delay at 3.3V, this device is well-suited for high-speed digital systems including servers, LED displays, network equipment, telecom infrastructure, and motor control applications.

Working Principle: SN74LVC1G74DCU Working Principle

The SN74LVC1G74 is a D-type flip-flop that operates as a 1-bit storage element. On the rising edge (positive edge) of the clock input, the data present at the D input is captured and transferred to the Q output. After the clock edge, the D input can change without affecting the Q output, as long as proper setup and hold times are observed. The device has two asynchronous inputs: PRE (preset) and CLR (clear). When PRE is pulled low, Q is forced high regardless of other inputs. When CLR is pulled low, Q is forced low regardless of other inputs. Both PRE and CLR should be high for normal synchronous operation. The complementary Q bar output provides the inverse of the Q output. The Ioff feature includes circuitry that disables the outputs when Vcc is 0V, preventing damaging current backflow through the device and allowing it to be used in partial power-down and live insertion applications. The over-voltage tolerant inputs allow interfacing with 5V signals even when the device is powered at lower voltages, enabling voltage translation in mixed-voltage systems.

Pin Description: SN74LVC1G74DCU Pin Definition and Functions
Pin Number Pin Name Description
1 CLK Clock Input – rising edge triggered
2 D Data Input
3 Q Inverted Output (Q Bar)
4 GND Ground
5 Q Normal Output
6 CLR Clear Input – active low, asynchronous
7 PRE Preset Input – active low, asynchronous
8 VCC Positive Power Supply (1.65V to 5.5V)
Application Scenarios: In which products and applications is SN74LVC1G74DCU used
  • Server and data center logic circuits
  • LED display scanning and driving
  • Network switch and router interfaces
  • Telecommunications infrastructure equipment
  • Motor driver control logic
  • I/O expansion circuits
  • Data synchronization and buffering
  • General-purpose digital systems
Alternative Models: What chips are recommended as replacements for SN74LVC1G74DCU
Model Manufacturer Description
74LVC1G74DC Nexperia Pin compatible D-flip-flop, VSSOP-8
74LVC1G74XSMS8G SGMICRO D-type flip-flop, MSOP-8
MC74VHC1G74 onsemi Single D flip-flop, VHC family
SN74LVC1G79 Texas Instruments D-type flip-flop (no preset/clear)
TC7SET74FU Toshiba D-type flip-flop, US-8 package

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1