Opens in a new tab

Home » Integrated Circuits ICs » SN74LVC2G14DCKR

SN74LVC2G14DCKR

Dual Schmitt-trigger inverter, 1.65-5.5V, hysteresis, 5.4ns tpd, ±24mA, OVT inputs, SC70-6

45000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC2G14DCKR

Package:

SC70-6 / SOT-363 (2.0 x 1.25 x 1.0mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LVC2G14DCKR is a dual Schmitt-trigger inverter from Texas Instruments for 1.65V to 5.5V operation. It contains two independent inverters with Schmitt-trigger inputs in a single SC70-6 package. The Schmitt-trigger hysteresis (ΔVT) ensures clean switching with slow or noisy inputs. Features 5.4ns max tpd, ±24mA drive, 5.5V overvoltage-tolerant inputs, Ioff, and down-translation support.

Key Specifications

Logic Function Dual Schmitt-Trigger Inverter (Y = Ā × 2)
Channels 2 (independent)
Supply Voltage 1.65V to 5.5V
Propagation Delay (tpd) 5.4ns max @ 3.3V
Input Hysteresis (ΔVT) 0.22V typ @ 3.3V
Output Drive ±24mA @ 3.3V; ±32mA @ 4.5V
Quiescent Current (ICC) 10µA max
Input Voltage Tolerance Up to 5.5V
Ground Bounce (VOLP) <0.8V typ @ 3.3V
VOH Undershoot (VOHV) >2V typ @ 3.3V
Down Translation Yes (5V→3.3V, 3.3V→1.8V)
Ioff Support Yes
Package SC70-6 / SOT-363 (2.0 x 1.25mm)
Operating Temperature -40°C to +125°C

Features

  • Two independent Schmitt-trigger inverters in one package
  • 1.65V to 5.5V VCC operation
  • Input hysteresis for noise immunity
  • 5.5V overvoltage-tolerant inputs
  • 5.4ns max propagation delay at 3.3V
  • Low ground bounce (<0.8V) and VOH undershoot (>2V)
  • ±24mA output drive at 3.3V
  • Down-translation support (5V→3.3V→1.8V)
  • Ioff for partial-power-down / live insertion

Applications

  • Differential signal squaring
  • Dual switch debounce
  • RC oscillator (two-gate feedback)
  • Signal level translation with noise rejection
  • Power-on reset generation
  • Motor encoder signal conditioning
Product Introduction: SN74LVC2G14DCKR Product Introduction

The SN74LVC2G14DCKR is a dual Schmitt-trigger inverter from Texas Instruments containing two independent inverter channels with Schmitt-trigger inputs in a single SC70-6 package. The Schmitt-trigger hysteresis provides different thresholds for rising (VT+) and falling (VT–) signals, ensuring clean output transitions even with slowly-slewing or noisy input waveforms. The two channels can be used independently for signal conditioning, or combined for an RC oscillator (with the second inverter providing feedback through a resistor). The device supports 5.5V overvoltage-tolerant inputs, down-translation between voltage domains, Ioff partial-power-down isolation, and ±24mA output drive at 3.3V. The low ground bounce (2V) ensure signal integrity in high-speed designs.

Working Principle: SN74LVC2G14DCKR Working Principle

Each of the two inverter channels operates independently with Schmitt-trigger input hysteresis. The input has two thresholds: VT+ (positive-going, typically 1.63V at 3.3V VCC) and VT– (negative-going, typically 1.41V). When input rises through VT+, the output switches low; when input falls through VT–, the output switches high. The hysteresis ΔVT = VT+ – VT– prevents output oscillation on slow or noisy inputs. Both channels share common VCC and GND pins. The Ioff circuit disconnects outputs when VCC = 0V, preventing backflow. The low ground bounce specification means the output GND bounce during simultaneous switching stays below 0.8V, and VOH undershoot stays above 2V — critical for maintaining noise margins in high-speed systems.

Pin Description: SN74LVC2G14DCKR Pin Definition and Functions
Pin Name Description
1 1A Channel 1 Schmitt-trigger input
2 GND Ground
3 2A Channel 2 Schmitt-trigger input
4 2Y Channel 2 inverted output
5 VCC Supply voltage (1.65V to 5.5V)
6 1Y Channel 1 inverted output
Application Scenarios: In which products and applications is SN74LVC2G14DCKR used
  • RC Oscillator: Connect the output of inverter 1 to its input through a resistor (R1), and connect a capacitor from the input to GND. Feed inverter 1’s output to inverter 2’s input. The hysteresis creates a relaxation oscillator with frequency f ≈ 1/(R1×C×ln(VT+/(VCC–VT–))). This provides a simple clock source without a crystal or ceramic resonator.
  • Differential Encoder Squaring: Connect a differential encoder’s A and B channels to the two Schmitt inverters. The hysteresis squares the encoder’s sine/cosine outputs into clean digital signals for an MCU quadrature decoder. Each channel operates independently with its own threshold and hysteresis.
  • Dual Switch Debounce: Debounce two mechanical switches (e.g., UP/DOWN buttons) using the two inverters. Each switch connects to an inverter input through an RC filter. The Schmitt hysteresis ensures single, clean output transitions regardless of contact bounce duration.
Alternative Models: What chips are recommended as replacements for SN74LVC2G14DCKR
Model Channels Package Key Difference
SN74LVC1G14DCKR 1 SC70-5 Single channel, same family
SN74LVC2G14DBVR 2 SOT-23-6 Larger package, easier assembly
74AUP2G14GF 2 X2SON-8 Nexperia, 0.8V min, ultra-low power
NC7WZ14P6X 2 SC70-6 Renesas/IDT, similar specs

Recommend Parts

STM32L452RCT6

Ultra-low-power ARM Cortex-M4 MCU with FPU, 80MHz, 256KB Flash, 160KB SRAM, USB FS, LQFP64

Brand: ST

Package: LQFP-64 (10x10x1.4 mm)

IN STOCK: 10650pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV51216EDBLL-10TLI

8Mb (512Kx16) ultra-low-power SRAM, 10ns, ECC, 2.2~3.6V, industrial, 44-TSOP II

Brand: Issi

Package: 44-pin TSOP II

IN STOCK: 5432pcs

Cargo cycle: 3-7 Days

The minimum order is 1

RC0603JR-0720RL

20Ω ±5% 0.1W thick film chip resistor in 0603 package for general-purpose applications

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 3216pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F334K8T6

ARM Cortex-M4 MCU with high-resolution timer, 72MHz, 64KB Flash, LQFP-32

Brand: ST

Package: LQFP-32 (7.0 x 7.0 mm)

IN STOCK: 14928pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CSD87330Q3D

30V 20A NexFET power block, 91% eff@15A, 5V gate drive, LSON-8 3.3×3.3mm, up to 1.5MHz, -55~150°C

Brand: TI

Package: LSON-CLIP-8 (3.3 x 3.3 x 1.0 mm, land pattern per datasheet)

IN STOCK: 4400pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TLVH431AIDBZR

Adjustable precision shunt regulator, 1.24V ref, 1% A-grade, VO=1.24-18V, IK=0.1-70mA, 0.25Ohm zKA, SOT-23-3, -40 to 85C

Brand: TI

Package: SOT-23-3 (DBZ), 2.92 x 1.30 x 1.22 mm

IN STOCK: 2930pcs

Cargo cycle: 3-7 Days

The minimum order is 1