Opens in a new tab

SP3485EN-L

3.3V half-duplex RS-485, 10Mbps, 75176 pinout, 32 nodes, SOIC-8

8500

Effective Inventory

Image for reference only

Manufacturer Part:

SP3485EN-L

Package:

SOIC-8 (5.0 x 4.0 x 1.55mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SP3485EN-L is a 3.3V low-power half-duplex RS-485/RS-422 transceiver from MaxLinear with 10Mbps data rate, driver/receiver enables, and 75176-compatible pinout in a SOIC-8 package.

Key Specifications

Supply Voltage 3.3V (±5%)
Duplex Half-duplex (shared bus)
Data Rate 10Mbps max
Driver Differential Output 1.5V min (27Ω load)
Receiver Sensitivity ±200mV
Receiver Hysteresis 20mV typical
Common-Mode Range -7V to +12V
Nodes per Bus 32 (unit load)
Driver Propagation Delay 17ns typical, 60ns max
Receiver Propagation Delay 40ns typical, 100ns max
Driver Short-Circuit Current ±250mA
Supply Current (No Load) 1mA typical (driver enabled)
Shutdown Current 10µA typical
Operating Temperature -40°C to +85°C
Package SOIC-8 (5.0 x 4.0mm)

Features

  • 3.3V single supply operation
  • Pin-compatible with industry standard 75176
  • 10Mbps data rate for high-speed communication
  • Driver and receiver enable pins for direction control
  • -7V to +12V common-mode input voltage range
  • Up to 32 transceivers on one bus
  • Driver output short-circuit protection
  • Interoperable with 5V logic systems
  • Failsafe receiver (HIGH output on open inputs)

Applications

  • Industrial automation RS-485 networks
  • Building automation (HVAC, lighting)
  • Smart meters and energy management
  • Security and access control systems
  • Embedded system communication links
Product Introduction: SP3485EN-L Product Introduction

The SP3485EN-L from MaxLinear (formerly Exar/Sipex) is a 3.3V low-power half-duplex RS-485/RS-422 transceiver with a 10Mbps data rate. It is pin-compatible with the industry-standard 75176 transceiver, allowing direct replacement in existing designs. The BiCMOS process provides low power consumption without sacrificing performance. The driver outputs meet RS-485 specifications with a minimum 1.5V differential output across a 27Ω load. The receiver features ±200mV sensitivity with 20mV hysteresis for noise rejection, and a failsafe feature that guarantees a HIGH output when the inputs are open. The -7V to +12V common-mode range handles ground potential differences between systems. Up to 32 transceivers can share one bus. The EN-L suffix denotes the extended temperature range (-40°C to +85°C) in SOIC-8 package.

Working Principle: SP3485EN-L Working Principle

The SP3485EN-L operates as a half-duplex RS-485 transceiver where the driver and receiver share the same bus lines (A and B). In transmit mode, the driver enable (DE) is set high, and the receiver enable (RE) is set high (disabled). The driver takes the DI (data input) logic level and drives the A and B outputs as a differential pair: DI high drives A high and B low (positive VOD), DI low drives A low and B high (negative VOD). The differential output voltage is at least 1.5V across a 27Ω load, meeting the RS-485 specification. The driver is protected by current limiting to ±250mA for short-circuit conditions across the -7V to +12V common-mode range. In receive mode, DE is set low (driver outputs high-impedance) and RE is set low (receiver enabled). The receiver monitors the A-B differential voltage: when A-B exceeds +200mV, RO (receiver output) goes high; when A-B drops below -200mV, RO goes low. The 20mV hysteresis prevents output oscillation near the threshold in noisy environments. When the bus is idle (A-B between -200mV and +200mV, or inputs open), the failsafe circuit ensures RO is high. The device is pin-compatible with the 75176: pin 1=RO, pin 2=RE, pin 3=DE, pin 4=DI, pin 5=GND, pin 6=A, pin 7=B, pin 8=VCC.

Pin Description: SP3485EN-L Pin Definition and Functions
Pin Name Type Description
1 RO Output Receiver data output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Power Ground
6 A I/O Non-inverting driver output / receiver input
7 B I/O Inverting driver output / receiver input
8 VCC Power Supply (3.3V ±5%)

SP3485EN-L uses the 8-SOIC (N) surface-mount package from MaxLinear/Sipex: Pin 1 = RO (Receiver Output), Pin 2 = RE (Receiver Enable, active-low), Pin 3 = DE (Driver Enable, active-high), Pin 4 = DI (Driver Input), Pin 5 = GND, Pin 6 = A (non-inverting bus), Pin 7 = B (inverting bus), Pin 8 = VCC (3.0-3.6V). This is the industry-standard RS-485 transceiver pinout shared by SP3485, SN75176, MAX3485, and similar half-duplex devices. For auto-direction control, tie RE and DE together — when DI is idle HIGH, the driver is enabled for transmit; when the controller releases DI, the bus returns to receive mode. The -L suffix denotes lead-free RoHS compliance. For 5V operation, use SP485 (identical pinout, 5V supply).

Application Scenarios: In which products and applications is SP3485EN-L used
  • Industrial Networks: 10Mbps supports high-speed Modbus RTU and Profibus; -7V to +12V CMR tolerates ground loops between factory equipment
  • Building Automation: 3.3V supply simplifies design with modern MCUs; 32-node capacity covers multi-floor sensor networks
  • Smart Meters: Low 1mA supply current and 10µA shutdown extend battery life in remote meter reading nodes
  • Legacy Upgrade: 75176 pin-compatible allows drop-in replacement of 5V transceivers with 3.3V systems
  • Failsafe Operation: Open-bus failsafe (RO=HIGH) prevents garbage data during bus disconnection or cable faults
Alternative Models: What chips are recommended as replacements for SP3485EN-L
Model Manufacturer Key Difference Package Specs
SP3485CN-L MaxLinear Commercial temp (0°C to +70°C) version – –
SP481EN-L MaxLinear Reduced slew rate (250kbps), lower EMI – –
SP3481EN-L MaxLinear With shutdown mode, lower standby power – –
SN65HVD75DR TI 3.3V, 12Mbps, ±16kV IEC ESD, SOIC-8 – –
MAX3485ECSA+ ADI/Maxim 3.3V, 12Mbps, ±15kV ESD, SOIC-8 – –

SP3485EN-L is a 3.3V 10Mbps RS-485 transceiver from MaxLinear in SOIC-8. The SP3481 provides full-duplex operation. The SP3491 offers 3.3V full-duplex with 10Mbps. The SN65HVD485EDR from TI provides 3.3V RS-485 in SOIC-8 with 16Mbps. The MAX3485ECSA+ from ADI/Maxim offers 3.3V 10Mbps with ESD protection. The THVD1500 from TI provides 3.3V RS-485 with 500kbps for long cable runs. For 5V operation, SP485 offers identical pinout at 5V supply.

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1