Opens in a new tab

Home » Integrated Circuits ICs » SP485EN-L/TR

SP485EN-L/TR

RS-485 transceiver, 3.3V, 250kbps, SOIC-8, -40 to 85C

13511

Effective Inventory

Image for reference only

Manufacturer Part:

SP485EN-L/TR

Package:

SOIC-8 (3.9×4.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SP485EN-L/TR is a low-power RS-485/RS-422 transceiver. 3.3V supply, 250kbps data rate, -40 to 85C, SOIC-8 for industrial communication.

Key Specifications

Type RS-485/RS-422 Transceiver
Supply Voltage 3.3V
Data Rate 250 kbps
Driver Output ±2.0V min into 54 ohm
Receiver Input Sensitivity ±200 mV
Supply Current ~300 uA typ
ESD Protection ±15 kV HBM
Operating Temp -40 to +85C
Package SOIC-8

Features

  • 3.3V low-power operation
  • 250kbps data rate
  • Half-duplex RS-485
  • ±15kV ESD protection
  • ~300uA low supply current
  • Fail-safe receiver
  • SOIC-8 footprint
  • RoHS compliant

Applications

  • Industrial RS-485 network
  • Building automation
  • Motor drive communication
  • Remote sensor interface
Product Introduction: SP485EN-L/TR Product Introduction

The SP485EN-L/TR is a low-power 3.3V RS-485/RS-422 half-duplex transceiver in SOIC-8 package. 250kbps data rate for standard industrial communication. ~300uA supply current for power-efficient bus nodes. ±15kV ESD protection on bus pins. Fail-safe receiver ensures logic-high output when bus is idle or all drivers disabled.

Working Principle: SP485EN-L/TR Working Principle

The driver converts single-ended TTL/CMOS logic to differential RS-485 levels (A-B > 1.5V for logic 1, A-B < -1.5V for logic 0). The receiver converts differential bus levels back to single-ended logic. The half-duplex architecture shares A/B pins between driver and receiver with enable/disable controls. The 3.3V supply reduces power versus 5V transceivers. Current limiting and thermal shutdown protect the driver from bus faults.

Pin Description: SP485EN-L/TR Pin Definition and Functions
Pin Name Description
1 RO Receiver output
2 RE Receiver enable (active low)
3 DE Driver enable
4 DI Driver input
5 GND Ground
6 A Bus non-inverting
7 B Bus inverting
8 VCC 3.3V supply
Application Scenarios: In which products and applications is SP485EN-L/TR used
  • Industrial RS-485
  • Building automation
  • Motor drive comm
Alternative Models: What chips are recommended as replacements for SP485EN-L/TR
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1