Opens in a new tab

SST25PF040C-40I/SN

4Mbit SPI Flash, 40MHz, dual I/O, SOIC-8, AEC-Q100

8901

Effective Inventory

Image for reference only

Manufacturer Part:

SST25PF040C-40I/SN

Package:

8-SOIC (4.9 x 3.9 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SST25PF040C-40I/SN from Microchip Technology is a 4Mbit (512K x 8) SPI serial Flash memory with SuperFlash technology, 40MHz clock, and dual I/O support in 8-pin SOIC package.

Key Specifications

Density 4 Mbit (512K x 8)
Interface SPI (Mode 0 and Mode 3)
Max Clock Frequency 40 MHz
Supply Voltage 2.3V to 3.6V
Active Read Current 5 mA typical
Standby Current 5 uA typical
Sector Size 4 KB uniform sectors
Block Size 64 KB overlay blocks
Page Size 256 bytes
Endurance 100,000 cycles
Data Retention > 20 years
AEC-Q100 Yes
Package 8-SOIC (SN suffix)
Operating Temperature -40 to +85 C

Features

  • SuperFlash technology for low energy and high reliability
  • Dual I/O fast-read instructions for 2x data throughput
  • 4KB uniform sectors and 64KB overlay blocks for flexible erase
  • Software write protection via block-protection bits
  • AEC-Q100 qualified for automotive applications

Applications

  • Automotive ECU firmware storage
  • Embedded system boot Flash
  • Industrial equipment parameter storage
  • Consumer electronics code storage
  • IoT device firmware update storage
Product Introduction: SST25PF040C-40I/SN Product Introduction

The SST25PF040C-40I/SN from Microchip Technology is a 4Mbit SPI serial Flash memory manufactured with proprietary SuperFlash CMOS technology. The device features a four-wire SPI-compatible interface (Mode 0 and Mode 3) operating at up to 40MHz, with dual I/O fast-read instructions for increased data throughput. The 2.3V to 3.6V single-voltage read and write operation simplifies power supply design. The flexible erase architecture includes 4KB uniform sectors and 64KB overlay blocks. The SuperFlash split-gate cell design with thick-oxide tunneling injector provides superior reliability with 100,000 cycle endurance and greater than 20-year data retention. The device is AEC-Q100 qualified for automotive applications. The 40I/SN suffix denotes 40MHz, industrial temperature range, and 8-SOIC package.

Working Principle: SST25PF040C-40I/SN Working Principle

The SST25PF040C-40I/SN operates as an SPI serial Flash memory. (1) The SuperFlash split-gate cell design uses a thick-oxide tunneling injector for programming and erasing. Compared to standard stacked-gate NOR Flash, the split-gate architecture prevents over-erase, provides lower programming current, and shorter erase time, resulting in lower total energy consumption during write operations. (2) The SPI interface uses four signal lines: CE# (chip enable), SCK (serial clock), SI/SIO0 (serial input), and SO/SIO1 (serial output). Standard read operations shift address and data serially at up to 40MHz. Dual-output fast-read (3BH) uses both SI and SO pins for 2x data output rate. Dual I/O fast-read (BBH) uses both pins for address input and data output, further reducing access time. (3) Write operations require the Write-Enable (WREN) instruction before any program or erase. The Block-Protection bits (BP0, BP1, BP2, TB) in the status register control write protection for different memory regions. The BPL (Block-Protection Lock-Down) bit, enabled by the WP# pin, makes protection bits read-only for permanent write protection.

Pin Description: SST25PF040C-40I/SN Pin Definition and Functions
Pin Name Function
1 CE# Chip enable (active low)
2 SO/SIO1 Serial output / dual I/O data 1
3 WP# Write protect (active low)
4 VSS Ground
5 SI/SIO0 Serial input / dual I/O data 0
6 SCK Serial clock
7 HOLD# Suspend serial sequence
8 VDD Power supply (2.3-3.6V)
Application Scenarios: In which products and applications is SST25PF040C-40I/SN used
  • Automotive ECU firmware storage with AEC-Q100 qualification
  • Embedded system boot Flash with 40MHz SPI interface
  • Industrial equipment parameter storage with 100K cycle endurance
  • Consumer electronics code storage with dual I/O fast read
  • IoT device firmware update storage with write protection
Alternative Models: What chips are recommended as replacements for SST25PF040C-40I/SN
Model Manufacturer Key Difference
SST25PF020C-40I/SN Microchip 2Mbit, same family
SST26VF032B-104I/SN Microchip 32Mbit, Quad SPI, SST26
AT25SF041-SSHD-B Microchip 4Mbit, SPI, SOIC-8
W25X40CLSNIG Winbond 4Mbit, SPI/Dual, SOIC-8
M25P40-VMN6P ST 4Mbit, 50MHz, SOIC-8

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1