Opens in a new tab

Home » Insulated Gate Bipolar Transistors (IGBT) » SST25VF020B-80-4I-SAE

SST25VF020B-80-4I-SAE

2 Mbit SPI serial flash memory, 80MHz, 4KB uniform sectors, 2.7-3.6V, -40~85°C, SOIC-8

12765

Effective Inventory

Image for reference only

Manufacturer Part:

SST25VF020B-80-4I-SAE

Package:

SOIC-8 (SAE, 200 mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SST25VF020B-80-4I-SAE is a 2 Mbit (256KB) serial flash memory from Microchip Technology (formerly SST – Silicon Storage Technology). It features a standard SPI interface with single, dual, and quad I/O support for high-speed data transfer. With 80MHz clock frequency and uniform 4KB sectors, this device is ideal for code storage in embedded systems. The 4I variant operates over the industrial temperature range of -40°C to +85°C and is packaged in the SAE (SOIC-8) package. It supports Software Write Protect and Block Protection features.

Key Specifications

Manufacturer Microchip Technology (SST)
Product Category SPI Serial Flash Memory
Density 2 Mbit (256 KBytes)
Interface SPI (Serial Peripheral Interface)
Data Transfer Modes SPI, Dual I/O, Quad I/O
Maximum Clock Frequency 80 MHz
Sector Size 4 KB (uniform sectors)
Block Size 32 KB / 64 KB
Page Size 256 bytes
Voltage Supply Range 2.7V to 3.6V
Page Program Time 1.5 ms typical
Sector Erase Time 25 ms typical
Chip Erase Time 50 ms typical
Endurance 100,000 cycles (min)
Data Retention 20 years (typical)
Operating Temperature -40°C to +85°C (industrial)
Package SOIC-8 (SAE) – 200 mil body

Features

  • 2 Mbit serial flash memory with SPI interface
  • Single, Dual, and Quad I/O SPI modes
  • High speed: 80 MHz clock frequency
  • Uniform 4KB sector architecture
  • Low voltage operation: 2.7V to 3.6V
  • Software Write Protect (SWP)
  • Block Protection: top/bottom, 4KB, 32KB, 64KB
  • JEDEC Standard Manufacturer ID
  • Auto Address Increment (AAI) programming
  • Low power consumption
  • Active current: 15mA typical (read at 80MHz)
  • Standby current: 5μA typical
  • Deep power-down mode: 0.5μA typical
  • High endurance: 100,000 cycles minimum
  • 20 years data retention
  • Industrial temperature range: -40°C to +85°C
  • RoHS compliant SOIC-8 package

Applications

  • Firmware and boot code storage
  • Consumer electronics
  • Networking equipment
  • Industrial control systems
  • Automotive electronics
  • Set-top boxes and digital TVs
  • Wireless communication devices
  • Data logging and parameter storage
Product Introduction: SST25VF020B-80-4I-SAE Product Introduction

The SST25VF020B-80-4I-SAE is a 2-megabit (256KB) serial flash memory device manufactured by Microchip Technology (originally from Silicon Storage Technology – SST). It features a standard Serial Peripheral Interface (SPI) with support for Single, Dual, and Quad I/O modes, enabling high-speed data transfer at clock frequencies up to 80 MHz. The device has a uniform 4KB sector architecture with 64 sectors total, offering flexible erase options including 4KB sector erase, 32KB block erase, 64KB block erase, and full chip erase. Program operations are supported via Byte-Program and Auto Address Increment (AAI) Word-Program modes. The SST25VF020B includes comprehensive write protection features including Software Write Protect (SWP), Block Protection for top/bottom 4KB, 32KB, and 64KB blocks, and a Write Protect (WP) pin for hardware protection. Operating from a 2.7V to 3.6V power supply with very low active and standby current consumption, this device is ideal for portable and battery-powered applications. The 4I industrial temperature variant operates reliably from -40°C to +85°C. Packaged in an 8-pin SOIC (SAE, 200 mil body width), this flash memory is widely used for storing firmware, boot code, configuration data, and user parameters in a broad range of consumer, industrial, networking, and automotive applications.

Working Principle: SST25VF020B-80-4I-SAE Working Principle

The SST25VF020B is a NOR-type serial flash memory that stores data using floating-gate transistor technology. Each memory cell contains a floating gate surrounded by oxide insulation. Programming (writing) is accomplished by injecting electrons onto the floating gate through Fowler-Nordheim tunneling, which raises the threshold voltage of the transistor, representing a logic ‘0’. Erasing removes electrons from the floating gate via tunneling, returning the transistor to its low-threshold state, representing a logic ‘1’. The device communicates with a host controller through a 4-wire SPI interface (CE, SCK, SI, SO) which can be expanded to Dual I/O and Quad I/O modes for faster data transfer. All operations including read, program, and erase are initiated through standard SPI command sequences. The internal state machine handles the timing and algorithms for program and erase operations automatically, with status register bits indicating operation progress. Write protection features prevent accidental writes/erases by locking specific memory regions via command or hardware pin. The device features uniform 4KB sectors, allowing fine-grained erase granularity, and supports high-speed operations with 80MHz clock for fast read access.

Pin Description: SST25VF020B-80-4I-SAE Pin Definition and Functions
Pin Number Pin Name Description
1 CE# Chip Enable Input (active low)
2 SO Serial Data Output (MISO)
3 WP# Write Protect Input (active low)
4 VSS Ground
5 SI Serial Data Input (MOSI)
6 SCK Serial Clock Input
7 HOLD# Hold Input (suspends serial communication)
8 VDD Power Supply (2.7V to 3.6V)
Application Scenarios: In which products and applications is SST25VF020B-80-4I-SAE used
  • Firmware storage for microcontrollers and processors
  • Boot code storage in embedded systems
  • Consumer electronics products
  • Networking and telecom equipment
  • Industrial control and automation
  • Automotive electronics systems
  • Set-top boxes and digital television
  • Data logging and parameter storage
Alternative Models: What chips are recommended as replacements for SST25VF020B-80-4I-SAE
Model Manufacturer Description
W25Q32JV Winbond 32Mbit SPI flash, 133MHz, SOIC-8
GD25Q16 GigaDevice 16Mbit SPI flash, 120MHz, SOIC-8
MX25L3206E Macronix 32Mbit SPI flash, 86MHz, SOIC-8
AT25DF041A Adesto/Dialog 4Mbit serial flash, 85MHz, SOIC-8
SST25VF040B Microchip 4Mbit version, same family

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1