Opens in a new tab

STM32F105VCT6

STM32F105 Connectivity MCU, 72MHz, 256KB, dual CAN, USB OTG, LQFP-100

8029

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F105VCT6

Package:

LQFP-100 (14 x 14 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F105VCT6 from STMicroelectronics is a Connectivity line ARM Cortex-M3 microcontroller with 256KB Flash, 64KB SRAM, dual CAN, USB 2.0 OTG, dual 12-bit ADCs, and dual 12-bit DACs in a 100-pin LQFP package. Running at 72MHz, it targets industrial communication and networked embedded systems.

Key Specifications

Core ARM Cortex-M3 @ 72 MHz
Flash Memory 256 KB
SRAM 64 KB
I/O Pins 80 (5V tolerant)
ADC 2 x 12-bit, 1us, up to 2 MSPS interleaved
DAC 2 x 12-bit
Timers Up to 10 (4x 16-bit GP, 1x motor PWM)
Communication 5x USART, 2x I2C, 3x SPI, 2x I2S
CAN 2x CAN 2.0B (512B dedicated SRAM)
USB USB 2.0 FS OTG (1.25KB dedicated SRAM)
Ethernet MAC with IEEE 1588 (F107 only)
Supply Voltage 2.0V to 3.6V
Operating Temperature -40 to +85 C
Package LQFP-100 (14 x 14 mm)

Features

  • ARM Cortex-M3 core at 72MHz (1.25 DMIPS/MHz)
  • 256KB Flash, 64KB SRAM
  • Dual CAN 2.0B with 512B dedicated SRAM
  • USB 2.0 Full-Speed OTG (device/host/OTG)
  • Dual 12-bit ADCs (up to 2 MSPS interleaved)
  • Dual 12-bit DACs
  • 12-channel DMA controller
  • 5x USART, 3x SPI, 2x I2C, 2x I2S
  • 10 timers with pin remap capability
  • 80 I/O pins, nearly all 5V tolerant
  • 96-bit unique device ID

Applications

  • Industrial communication gateways
  • Motor drives and application control
  • Medical and handheld equipment
  • PLCs and inverters
  • Automotive ECU development
Product Introduction: STM32F105VCT6 Product Introduction

The STM32F105VCT6 from STMicroelectronics is a Connectivity line ARM Cortex-M3 microcontroller running at 72MHz with 256KB Flash and 64KB SRAM in a 100-pin LQFP package. The suffix VCT6 decodes as: V=100 pins, C=256KB Flash, T=LQFP package, 6=-40 to +85C industrial temperature. Unlike the mainstream STM32F103, the F105 Connectivity line adds dual CAN 2.0B controllers with 512B dedicated SRAM, USB 2.0 Full-Speed OTG controller with on-chip PHY, and dual 12-bit DACs. The F107 variant further adds Ethernet MAC. This makes the F105 ideal for industrial communication gateways requiring simultaneous CAN and USB connectivity.

Working Principle: STM32F105VCT6 Working Principle

The STM32F105 operates through five subsystems: (1) Cortex-M3 Core: A 3-stage pipeline 32-bit RISC processor running at 72MHz with hardware multiply and divide, NVIC for 60 maskable interrupts, and 16 priority levels. (2) Memory Bus Matrix: Multi-AHB bus system with 12-channel DMA allowing concurrent peripheral-to-memory transfers without CPU intervention. (3) CAN Controllers: Two CAN 2.0B active controllers with dedicated 512-byte SRAM support up to 1Mbps with hardware message filtering and time-triggered communication. (4) USB OTG: A Full-Speed USB 2.0 OTG controller with on-chip PHY supports device, host, and OTG modes with HNP/SRP protocol. The 1.25KB dedicated SRAM stores endpoint buffers. (5) Analog Peripherals: Dual 12-bit ADCs can operate in interleaved mode for 2 MSPS, while dual 12-bit DACs provide analog output capability for waveform generation.

Pin Description: STM32F105VCT6 Pin Definition and Functions
Pin Group Count Type Description
VDD/VSS 10 pairs Power Digital supply and ground
VDDA/VSSA 1 pair Power Analog supply for ADC/DAC
VBAT 1 Power Battery backup for RTC
NRST 1 Input System reset (active low)
BOOT0/1 2 Input Boot mode selection
OSC_IN/OUT 2 I/O Main oscillator (3-25MHz)
GPIO 80 I/O General-purpose I/O (5V tolerant)
USB_DP/DM 2 I/O USB data lines
CAN_RX/TX 4 I/O Dual CAN bus (with remap)
Application Scenarios: In which products and applications is STM32F105VCT6 used
  • Industrial CAN-to-USB gateway with dual CAN and USB OTG in a single MCU
  • Motor drive controller with dual 12-bit ADC for current sensing and DAC for reference
  • Medical handheld device with USB device mode for data download and CAN for internal comm
  • PLC communication module with dual CAN bus and 12-channel DMA for concurrent I/O
Alternative Models: What chips are recommended as replacements for STM32F105VCT6
Model Manufacturer Flash CAN Notes
STM32F107VCT6 ST 256KB 2 With Ethernet MAC
STM32F105RBT6 ST 128KB 2 Smaller 64-pin package
STM32F407VET6 ST 512KB 2 F4 series, 168MHz
AT32F407VCT7 Artery 256KB 2 Pin-compatible alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1