Opens in a new tab

STM32F427ZIT6

180MHz Cortex-M4F MCU, 2MB Flash, 256KB SRAM, Chrom-ART, FMC+SDRAM, LCD-TFT, USB HS, Eth, LQFP-144

14241

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F427ZIT6

Package:

LQFP-144 (20 x 20 x 1.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F427ZIT6 from STMicroelectronics is a high-performance Arm Cortex-M4 32-bit microcontroller with FPU and DSP, running at 180MHz in a 144-pin LQFP package. It features 2MB dual-bank Flash, 256KB SRAM (including 64KB CCM), Chrom-ART Accelerator (DMA2D), FMC with SDRAM, LCD-TFT controller, USB HS/FS OTG, Ethernet MAC, and three 12-bit ADCs.

Key Specifications

Core Arm Cortex-M4 with FPU and DSP
Max Frequency 180MHz (225 DMIPS)
Flash Memory 2MB dual-bank (read-while-write)
SRAM 256KB (192KB main + 64KB CCM) + 4KB backup
ART Accelerator 0-wait-state Flash execution at 180MHz
Chrom-ART Accelerator DMA2D for graphics content creation
FMC Flexible memory controller (SDRAM, SRAM, NOR, NAND)
LCD-TFT Controller Up to 4096×2048, 83MHz pixel clock
ADC 3x 12-bit, 2.4Msps (7.2Msps triple interleaved)
DAC 2x 12-bit
Timers 12x 16-bit + 2x 32-bit (up to 180MHz)
USART/UART 4 USART + 4 UART (11.25Mbps)
SPI/I2S 6 SPI (45Mbps) + 2 I2S + 1 SAI
I2C 3 (SMBus/PMBus)
CAN 2 (2.0B active)
USB HS/FS OTG (with ULPI) + FS OTG
Ethernet 10/100 MAC (IEEE 1588v2)
Camera Interface 8-14 bit, up to 54MB/s
DMA 16-stream with FIFO and burst
I/O Pins 114 (up to 90MHz toggle)
Supply Voltage 1.7V to 3.6V
Package LQFP-144 (20 x 20mm)
Operating Temperature -40°C to +85°C

Features

  • 180MHz Cortex-M4F with ART Accelerator for 0-wait Flash
  • 2MB dual-bank Flash enabling concurrent read/write for OTA updates
  • 64KB Core Coupled Memory (CCM) for time-critical code/data
  • Chrom-ART Accelerator (DMA2D) for hardware-accelerated 2D graphics
  • FMC supporting SDRAM, SRAM, PSRAM, NOR/NAND/CompactFlash
  • LCD-TFT controller with up to 4096×2048 resolution
  • Three 12-bit ADCs with triple interleaved mode (7.2Msps)
  • USB 2.0 HS OTG with ULPI for external PHY
  • 10/100 Ethernet MAC with IEEE 1588v2 precision timestamp
  • Serial Audio Interface (SAI) with independent audio PLL

Applications

  • High-end industrial HMI with TFT-LCD display
  • Medical imaging and diagnostic equipment
  • Motor drive with Ethernet fieldbus communication
  • Consumer audio with SAI and I2S interfaces
  • Networking equipment with USB HS and Ethernet
Product Introduction: STM32F427ZIT6 Product Introduction

The STM32F427ZIT6 from STMicroelectronics is a high-performance Arm Cortex-M4 microcontroller with FPU and DSP instructions, running at up to 180MHz and delivering 225 DMIPS. It integrates 2MB dual-bank Flash with ART Accelerator for 0-wait-state execution, 256KB SRAM including 64KB CCM, Chrom-ART Accelerator (DMA2D) for 2D graphics acceleration, and an FMC supporting SDRAM/LCD interfaces. Connectivity includes USB HS/FS OTG, 10/100 Ethernet MAC with IEEE 1588v2, 3x ADC, 2x DAC, SAI, 6 SPI, 8 UART, 3 I2C, 2 CAN, and a camera interface in a 144-pin LQFP package.

Working Principle: STM32F427ZIT6 Working Principle

The STM32F427ZIT6 is built around the Arm Cortex-M4F core with a built-in floating-point unit (single-precision) and DSP/SIMD instructions. The ART Accelerator uses an instruction cache, literal cache, and prefetch queue to eliminate wait states when executing from Flash at 180MHz. The dual-bank Flash architecture allows one bank to execute code while the other is being programmed, enabling seamless firmware updates. The 64KB CCM RAM is directly connected to the CPU’s I-bus for deterministic zero-wait access to time-critical code. The Chrom-ART Accelerator (DMA2D) performs hardware 2D memory-to-memory transfers with pixel format conversion, alpha blending, and color keying, offloading the CPU for GUI rendering. The FMC provides a 32-bit external bus interface for SDRAM, SRAM, and LCD controllers.

Pin Description: STM32F427ZIT6 Pin Definition and Functions
Pin Group Name Type Function
1-20 PE0-PE15 I/O Port E: FMC, TIM, I2C, SPI, UART
21-36 PD0-PD15 I/O Port D: FMC, USART, SPI, Timer
37-52 PC0-PC15 I/O Port C: FMC, ADC, SPI, I2S, OTG
53-68 PA0-PA15 I/O Port A: ETH, USB, ADC, TIM, UART, SPI
69-84 PB0-PB15 I/O Port B: ETH, USB, I2C, SPI, TIM
85-100 PF0-PF15 I/O Port F: FMC, SPI, TIM
101-108 PG0-PG7 I/O Port G: FMC, ETH, SPI
109-120 VDD/VSS Power Multiple supply/ground pairs
121-130 VDDA/VREF Power Analog supply, reference, VBAT
131-144 PG8-PG15 I/O Port G: FMC, ETH, LCD
Application Scenarios: In which products and applications is STM32F427ZIT6 used
  • Industrial HMI with TFT-LCD using Chrom-ART DMA2D acceleration
  • Medical ultrasound imaging with triple ADC interleaved sampling
  • Motor drive controller with Ethernet fieldbus and IEEE 1588 sync
  • Professional audio equipment with SAI and I2S at 192kHz
  • Consumer networking gateway with USB HS and Ethernet MAC
Alternative Models: What chips are recommended as replacements for STM32F427ZIT6
Manufacturer Part Number Package Notes
ST STM32F429ZIT6 LQFP-144 Same + LCD-TFT controller with chrom-ART
ST STM32F427VIT6 LQFP-100 Same core, 100-pin, fewer I/O
ST STM32H743ZIT6 LQFP-144 400MHz Cortex-M7 upgrade path
NXP MIMXRT1062DVL6A LQFP-144 600MHz Cortex-M7, crossover MCU
TI TMS320F28379DZWTT NFBGA-337 Dual C28x, 200MHz, real-time MCU

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1