Opens in a new tab

STM32F767IIT6

ARM Cortex-M7 MCU at 216MHz with 2MB dual-bank Flash, 532KB SRAM, LCD-TFT, MIPI DSI, JPEG codec, Ethernet, 3x CAN, DFSDM in LQFP-176.

3158

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F767IIT6

Package:

LQFP-176

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F767IIT6 is a high-performance 32-bit microcontroller from STMicroelectronics, featuring an ARM Cortex-M7 32-bit with DP-FPU and DSP operating at up to 216 MHz. It integrates 2 MB (dual bank, read-while-write) of Flash memory and 532 KB (512KB system + 16KB I-TCM + 4KB backup) of SRAM. Housed in a LQFP-176 package with Up to 140 I/O pins, this MCU offers an excellent balance of performance, peripheral integration, and power efficiency. The device operates from 1.7V to 3.6V and supports industrial temperature range of -40°C to +85°C.

Key Specifications

Core ARM Cortex-M7 32-bit with DP-FPU and DSP
Maximum Frequency 216 MHz
Flash Memory 2 MB (dual bank, read-while-write)
SRAM 532 KB (512KB system + 16KB I-TCM + 4KB backup)
Package LQFP-176
Operating Voltage 1.7V to 3.6V
Operating Temperature -40°C to +85°C
I/O Pins Up to 140
3x 12-bit ADC 2.4 MSPS, up to 24 channels
DAC 2x 12-bit
DMA 16-stream controller with FIFOs and burst support
Timers Up to 18 (13x 16-bit + 2x 32-bit + 1x LPTIM + 2x WDT + SysTick)
USART/UART 4x USART + 4x UART (up to 12.5 Mbit/s)
SPI/I2S 6x SPI + 3x I2S (up to 54 Mbit/s)
I2C 4x
CAN 3x CAN 2.0B Active
Ethernet 10/100 MAC with IEEE 1588v2
USB USB OTG HS (with ULPI) + USB OTG FS
Other Peripherals 2x SAI + SPDIFRX + 2x SDMMC + DCMI + LCD-TFT + MIPI DSI + JPEG Codec + Chrom-ART + QSPI + FMC + DFSDM
Performance 462 DMIPS / 2.14 DMIPS/MHz

Features

  • High-performance ARM core with FPU and DSP instructions
  • ART Accelerator enabling 0-wait state execution from Flash memory
  • Rich set of analog peripherals including high-speed ADC(s) and DAC(s)
  • DMA controller for autonomous data transfers
  • Advanced timers including PWM motor control and watchdog timers
  • Multiple communication interfaces: I2C, USART, SPI/I2S
  • Low-power modes: Sleep, Stop, Standby with VBAT support
  • CRC calculation unit and unique device ID
  • Industrial temperature range and RoHS compliant

Applications

  • Industrial automation and control systems
  • IoT gateways and edge computing devices
  • Motor control and drive systems
  • Human-machine interface (HMI) and touch panels
  • Consumer electronics and smart accessories
  • Medical devices and instrumentation
  • Building automation and smart home
  • Communication equipment and networking
  • Automotive electronics (where applicable)
  • Battery-powered and portable devices
Product Introduction: STM32F767IIT6 Product Introduction

The STM32F767IIT6 is a high-performance microcontroller from STMicroelectronics, built on the ARM Cortex-M7 32-bit with DP-FPU and DSP operating at up to 216 MHz. It integrates 2 MB (dual bank, read-while-write) of Flash memory and 532 KB (512KB system + 16KB I-TCM + 4KB backup) of SRAM, providing ample resources for complex embedded applications. The device features 2.4 MSPS, up to 24 channels, along with comprehensive communication interfaces including 4x, 4x USART + 4x UART (up to 12.5 Mbit/s), and 6x SPI + 3x I2S (up to 54 Mbit/s). Additional connectivity includes CAN interface, Ethernet MAC, USB OTG. Housed in a LQFP-176 package with Up to 140 I/O pins, the STM32F767IIT6 operates from 1.7V to 3.6V supply voltage across the -40°C to +85°C industrial temperature range. It is ideal for a wide range of applications including industrial control, IoT devices, motor drives, consumer electronics, and automotive systems (where applicable).

Working Principle: STM32F767IIT6 Working Principle

The STM32F767IIT6 operates on the ARM Cortex-M7 32-bit with DP-FPU and DSP architecture with an advanced pipeline design. The core runs at up to 216 MHz with a nested vectored interrupt controller (NVIC) for low-latency interrupt handling. The multi-layer bus matrix connects the core, DMA controllers, and peripherals to memory resources, enabling parallel data transfers without CPU intervention. The DMA controller handles data transfers between peripherals and memory autonomously, freeing the CPU for application processing. The analog subsystem includes high-speed ADC(s) with multiple channels and DMA support. Power management is achieved through multiple low-power modes including Sleep, Stop, and Standby, with progressive power reduction. The integrated voltage regulator operates in various modes depending on system state. The VBAT pin maintains RTC operation and backup register contents during main power loss. The device supports multiple boot options including user Flash, system memory bootloader, and embedded SRAM, depending on BOOT pin configuration.

Pin Description: STM32F767IIT6 Pin Definition and Functions
Pin Group Type Function
VDD (multiple) Power Main power supply
VSS (multiple) Ground Ground
VDDA Power Analog power supply for ADC/DAC
VSSA Ground Analog ground
VBAT Power Battery backup for RTC and backup registers
NRST I/O Active-low reset
PA13 I/O SWDIO (Serial Wire Debug Data I/O)
PA14 I/O SWCLK (Serial Wire Debug Clock)
PA9/PA10 I/O USART1_TX/RX / I2C1 pins
PA2/PA3 I/O USART2_TX/RX / ADC channels
PA5/PA6/PA7 I/O SPI1_SCK/MISO/MOSI / ADC channels
PA0 I/O ADC_IN0 / WKUP1 / TIM2_CH1
PC13 I/O GPIO / TAMPER / RTC_OUT
PC14/PC15 I/O LSE oscillator pins / GPIO
PH0/PH1 I/O HSE oscillator pins
Total I/O – Up to 140 I/O pins, most 5V tolerant
Application Scenarios: In which products and applications is STM32F767IIT6 used
  • Industrial automation and control systems
  • IoT gateways and edge computing devices
  • Motor control and drive systems
  • Human-machine interface (HMI) and touch panels
  • Consumer electronics and smart accessories
  • Medical devices and instrumentation
  • Building automation and smart home
  • Communication equipment and networking
  • Automotive electronics (where applicable)
  • Battery-powered and portable devices
Alternative Models: What chips are recommended as replacements for STM32F767IIT6
Model Manufacturer Key Difference
STM32F767IGT6 STMicroelectronics LQFP-176, same specs, different temperature grade
STM32F769IIT6 STMicroelectronics Same package/Flash/RAM, adds HDMI-CEC
STM32H743IIT6 STMicroelectronics 480MHz Cortex-M7, 2MB Flash, 1MB SRAM, higher performance
STM32F469IIT6 STMicroelectronics Cortex-M4F at 180MHz, 2MB Flash, LCD + Chrom-ART, lower cost
STM32F750N8H6 STMicroelectronics WLCSP package, 64KB Flash, crypto/hash peripherals

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1