Opens in a new tab

Home » Integrated Circuits ICs » STM32L432KCU6

STM32L432KCU6

Ultra-low-power ARM Cortex-M4 MCU, 80MHz, 256KB Flash, 64KB SRAM, USB, CAN, UFQFPN32, STMicroelectronics

9441

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L432KCU6

Package:

UFQFPN32 (5×5×0.6mm, exposed pad)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STMicroelectronics STM32L432KCU6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M4 core with FPU, operating at up to 80MHz. It features 256KB Flash memory, 64KB SRAM, and a comprehensive set of peripherals including USB 2.0 full-speed, CAN, SPI, I2C, USART, and a 12-bit ADC at 5Msps. Housed in a 32-pin UFQFPN package (5×5mm), it is designed for battery-powered and energy-efficient applications.

Key Specifications

Core ARM Cortex-M4 with FPU and DSP instructions
Max Clock Frequency 80 MHz
Performance 100 DMIPS / 273.55 CoreMark
Flash Memory 256 KB (single bank)
SRAM 64 KB (16KB with hardware parity)
Supply Voltage 1.71V to 3.6V
Operating Temperature -40°C to +85°C
GPIO Count 26 (most 5V-tolerant)
ADC 1× 12-bit, 5 Msps, 10 channels
DAC 2× 12-bit channels
Comparators 2 (ultra-low-power)
Op-Amp 1 (with built-in PGA)
Timers 11 total (1× 32-bit, 4× 16-bit GP, 1× motor control, 2× LP, 2× watchdog, SysTick)
Communication Interfaces USB 2.0 FS, CAN 2.0B, 3× USART, 2× SPI, 2× I2C, 1× SAI, 1× SWPMI, 1× QSPI
DMA 14-channel DMA controller
Security TRNG, AES, Firewall, Readout protection
Package UFQFPN32 (5×5×0.6mm)

Features

  • Ultra-low-power: 8nA Shutdown, 28nA Standby, 280nA Standby+RTC, 1.0µA Stop 2
  • 84 µA/MHz run mode with ART Accelerator (0-wait-state Flash execution)
  • 4µs wakeup from Stop mode
  • FlexPowerControl for dynamic power optimization
  • Batch Acquisition Mode (BAM) for efficient data acquisition
  • Internal 16MHz RC (±1%), 32kHz RC (±5%), 48MHz with clock recovery
  • 2 PLLs for system clock, USB, audio, and ADC
  • RTC with hardware calendar, alarms, and calibration
  • True Random Number Generator (TRNG) for hardware entropy
  • AES hardware encryption
  • SWD and JTAG debug with Embedded Trace Macrocell

Applications

  • Wearable devices and fitness trackers
  • IoT sensor nodes
  • Portable medical instruments
  • Smart home devices
  • USB peripherals
  • Motor control and industrial automation
Product Introduction: STM32L432KCU6 Product Introduction

The STMicroelectronics STM32L432KCU6 is an ultra-low-power microcontroller based on the ARM Cortex-M4 32-bit RISC core with FPU and DSP instructions, operating at up to 80MHz (100 DMIPS). It features 256KB single-bank Flash, 64KB SRAM (16KB with hardware parity), and a Quad SPI interface for external memory expansion. The device integrates a rich peripheral set including USB 2.0 full-speed (crystal-less), CAN 2.0B, 3× USART, 2× SPI, 2× I2C, SAI audio interface, SWPMI, a 12-bit ADC at 5Msps, 2× 12-bit DAC, 2 comparators, 1 op-amp with PGA, and 11 timers. Security features include TRNG, AES, Firewall, and readout protection. Housed in a 32-pin UFQFPN (5×5mm) package.

Working Principle: STM32L432KCU6 Working Principle

The STM32L432KCU6 is built on ST’s ultra-low-power platform with FlexPowerControl. The Cortex-M4 core executes instructions from Flash memory with 0 wait-states thanks to the ART Accelerator (Adaptive Real-Time memory accelerator with instruction cache, data cache, and prefetch buffer). The multi-AHB bus matrix allows concurrent access to peripherals and memory. Multiple power modes (Run, Sleep, Stop 0/1/2, Standby, Shutdown) enable fine-grained power optimization: in Stop 2 mode (1.0µA), low-power peripherals (LP UART, LP timers) remain active. The internal clock tree includes HSI16 (16MHz ±1%), MSI (100kHz-48MHz, auto-trimmed by LSE), HSI48 (48MHz with CRS for USB crystal-less), and LSE (32.768kHz) feeding two PLLs. The DMA controller handles data transfers between peripherals and memory without CPU intervention. Security features include a Firewall for code isolation and AES hardware accelerator for cryptographic operations.

Pin Description: STM32L432KCU6 Pin Definition and Functions
Application Scenarios: In which products and applications is STM32L432KCU6 used
Alternative Models: What chips are recommended as replacements for STM32L432KCU6

STM32L432KBU6 (UFQFPN32, different flash/RAM option); STM32L433KCU6 (adds LCD controller); STM32L412KCU6 (reduced feature, lower cost); nRF52832 (Nordic, similar size, BLE); SAMD21 (Microchip, Cortex-M0+, lower power but less performance)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1