Opens in a new tab

SZNUP2115LT1G

CAN bus ESD protection, 24V bidirectional, AEC-Q101, SOT-23-6, onsemi

18327

Effective Inventory

Image for reference only

Manufacturer Part:

SZNUP2115LT1G

Package:

SOT-23-6 (2.9 x 1.6 x 1.2mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SZNUP2115LT1G from onsemi is a bidirectional TVS diode array designed for CAN bus and automotive ESD protection. The NUP2115 series provides IEC 61000-4-2 ESD protection for Controller Area Network (CAN) bus lines with 24V working voltage in a SOT-23 package.

Key Specifications

  • Type: Bidirectional TVS Diode Array for CAN Bus
  • Manufacturer: onsemi
  • Working Voltage (VRWM): 24V
  • Direction: Bidirectional
  • ESD Protection: IEC 61000-4-2
  • Number of Channels: 2 (CANH, CANL)
  • Package: SOT-23-6
  • Operating Temp: -55C to +125C
  • AEC-Q101: Qualified
  • RoHS: Compliant

Features

  • Specifically designed for CAN bus ESD protection
  • AEC-Q101 automotive qualified
  • Bidirectional protection for CANH and CANL lines
  • 24V working voltage compatible with 12V/24V CAN systems
  • Low capacitance preserves CAN signal integrity

Applications

  • Automotive CAN bus protection
  • Industrial CAN bus networks
  • CAN FD bus protection
  • LIN bus ESD protection
Product Introduction: SZNUP2115LT1G Product Introduction

The SZNUP2115LT1G from onsemi is an AEC-Q101 qualified bidirectional TVS diode array for CAN bus ESD protection with 24V working voltage, protecting both CANH and CANL lines in a SOT-23-6 package.

Working Principle: SZNUP2115LT1G Working Principle

The NUP2115 uses back-to-back Zener diode pairs on each CAN bus line to provide bidirectional ESD protection. The 24V working voltage accommodates the common-mode voltage range of CAN bus systems (including CAN FD). When an ESD or transient event exceeds the breakdown voltage on either CANH or CANL, the corresponding Zener diode pair avalanches and clamps the voltage to a safe level. The device maintains low capacitance to preserve CAN signal integrity at high data rates.

Pin Description: SZNUP2115LT1G Pin Definition and Functions
Pin Name Function
1 CANH CAN High line (ESD protected)
2 GND Ground
3 CANL CAN Low line (ESD protected)
4 NC No connect
5 VCC Power supply / VBAT reference
6 NC No connect
Application Scenarios: In which products and applications is SZNUP2115LT1G used
  • Automotive CAN bus protection
  • Industrial CAN bus networks
  • CAN FD bus protection
  • LIN bus ESD protection
Alternative Models: What chips are recommended as replacements for SZNUP2115LT1G
Model Manufacturer Key Spec Package
NUP2115LT1G onsemi CAN bus ESD 24V SOT-23-6
NUP2105LT1G onsemi CAN bus ESD 24V SOT-23-6
TPD4E05U06 TI 4-ch ESD 5V USON-10

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1