Opens in a new tab

TC58CYG2S0HRAIG

4Gbit SLC NAND Flash, Serial SPI interface (x1/x2/x4), 1.8V, 104MHz, 8-WSON, Kioxia

4560

Effective Inventory

Image for reference only

Manufacturer Part:

TC58CYG2S0HRAIG

Package:

WSON-8 (6 x 8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TC58CYG2S0HRAIG is a 4-Gigabit SLC (Single-Level Cell) NAND flash memory with a high-speed Serial Peripheral Interface (SPI) from Kioxia Corporation (formerly Toshiba Memory). As part of the second-generation Serial Interface NAND product family, it offers 4 Gbit (512 MB) of non-volatile storage in a compact 8-pin WSON package measuring just 6 mm x 8 mm. Operating at 1.8 V (1.70 V to 1.95 V range), it supports standard SPI, Dual I/O, and Quad I/O modes with clock speeds up to 104 MHz for flexible performance scaling. The device integrates on-chip hardware ECC with bit-flip reporting, data protection features, parameter page function, and high-speed sequential read capability. Using 24nm SLC NAND technology for high endurance and long data retention, this Serial NAND provides a cost-effective, high-density alternative to traditional parallel NOR flash in embedded systems, requiring minimal pins and board space.

Key Specifications

Memory Type SLC NAND Flash (Serial Interface)
Density 4 Gbit (512 MB)
Organization 512M x 8 bits
Technology Node 24 nm
Interface SPI (Serial Peripheral Interface) Mode 0, 3
I/O Modes x1 (standard), x2 (Dual), x4 (Quad)
Clock Frequency Up to 104 MHz
Page Size 4096 + 128 bytes (4 KB page)
Supply Voltage 1.70 V to 1.95 V (1.8 V typical)
ECC On-chip hardware ECC (ON/OFF selectable, bit-flip report)
Data Protection Block protection feature
Parameter Page Yes (detailed device info)
Sequential Read High-speed sequential read mode
Operating Temperature -40°C to +85°C
Package WSON-8 (6 x 8 mm)

Features

  • 4 Gbit SLC NAND flash with SPI interface
  • Standard SPI compatible (Mode 0 and Mode 3)
  • x1, x2, x4 I/O transfer modes support
  • Up to 104 MHz operating frequency
  • 4 KB page size with 128 bytes spare area
  • 1.8 V low-voltage operation
  • On-chip hardware ECC with bit-flip count report
  • Data protection (specific block protection)
  • Parameter page function
  • High-speed sequential read mode
  • 24nm SLC technology for high endurance
  • Industrial temperature range: -40°C to +85°C
  • Compact 8-pin WSON (6×8 mm) package
  • Low pin count alternative to parallel NOR flash
  • RoHS compliant, lead-free
  • High density in small form factor

Applications

  • Flat-panel TVs and display monitors
  • Printers, MFPs, and imaging equipment
  • Wearable devices and smart watches
  • Industrial control and factory automation
  • IoT edge devices and smart sensors
  • Networking and telecom equipment
  • Smart metering and intelligent lighting
  • Consumer electronics and multimedia
  • MCU/SoC code and data storage (NOR alternative)
  • Data logging and configuration memory
  • Automotive infotainment (qualified variants)
  • Medical devices and instrumentation
Product Introduction: TC58CYG2S0HRAIG Product Introduction

The TC58CYG2S0HRAIG is a 4-Gigabit SLC NAND Flash memory with a high-speed Serial Peripheral Interface (SPI) from Kioxia (formerly Toshiba Memory), part of the second-generation serial NAND family. Organized as 512M x 8 bits with 4KB page size, it operates at 1.70 V to 1.95 V (1.8 V typical) and supports SPI modes 0 and 3 with 1-bit, 2-bit, and 4-bit I/O transfer modes at up to 104 MHz clock frequency. The device integrates on-chip hardware ECC (Error Correction Code) with a bit-flip report function, data protection features for specific block locking, and high-speed sequential read capability. Packaged in a compact 8-pin WSON (6 mm x 8 mm), this Serial NAND provides a high-density, low-pin-count alternative to traditional parallel NOR flash, making it ideal for code and data storage in consumer, industrial, and IoT embedded applications.

Working Principle: TC58CYG2S0HRAIG Working Principle

The TC58CYG2S0HRAIG uses SLC (Single-Level Cell) NAND flash technology where each memory cell stores one bit of data, providing higher endurance, better data retention, and faster access compared to MLC or TLC NAND. Unlike traditional parallel NAND which requires a wide address/data bus, this device communicates over a standard SPI interface with only 8 pins, dramatically reducing board space and system pin count. The SPI interface supports 1-bit (standard SPI), 2-bit (Dual I/O), and 4-bit (Quad I/O) modes for progressively higher data throughput. An on-chip ECC engine automatically corrects bit errors during read operations, relieving the host processor of ECC management while providing a bit-flip count report for system-level monitoring. Data is programmed and erased on a page/block basis (4 KB page size), with bad block management and wear leveling typically handled by the host system or flash translation layer. The Parameter Page function stores detailed device information that the host can read to configure the interface optimally.

Pin Description: TC58CYG2S0HRAIG Pin Definition and Functions
Pin No. Pin Name I/O Description
1 CS# I Chip Select (active low)
2 SO / IO0 / SI I/O Serial Data Output / I/O bit 0 / Serial Data Input
3 WP# / SO2 I/O Write Protect (active low) / I/O bit 2 (4-bit mode)
4 GND P Ground
5 SI / IO1 / SO I/O Serial Data Input / I/O bit 1 / Serial Data Output
6 SCLK I Serial Clock Input
7 HOLD# / SO3 I/O Hold (active low) / I/O bit 3 (4-bit mode)
8 VCC P Power supply (1.70-1.95 V)
Pad Exposed Pad P Exposed thermal pad (must connect to GND)

Package: 8-pin WSON (Very Very thin Small Outline Non-leaded package), 6.0 mm x 8.0 mm body, 0.8 mm height, exposed pad for thermal dissipation.

Application Scenarios: In which products and applications is TC58CYG2S0HRAIG used
  • Flat-panel TVs and display monitors
  • Printers and multifunction peripherals
  • Wearable devices and smart watches
  • Industrial control and automation
  • IoT edge devices and smart sensors
  • Networking and communication equipment
  • Smart metering and intelligent lighting
  • Multimedia and consumer electronics
  • Code storage for MCUs and SoCs (NOR flash alternative)
  • Data logging and configuration storage
Alternative Models: What chips are recommended as replacements for TC58CYG2S0HRAIG
Model Density Voltage Interface Description
TC58CYG1S3HRAIJ 2Gb 1.8V SPI (x1/x2/x4) Lower density same family
TC58CVG2S0HRAIJ 4Gb 3.3V SPI (x1/x2/x4) 3.3V version of same density
TH58CYG3S0HRAIJ 8Gb 1.8V SPI (x1/x2/x4) Higher density same family
W25N04GV 4Gb 3.3V SPI SLC NAND Winbond equivalent
GD5F4GQ4 4Gb 3.3V SPI SLC NAND GigaDevice alternative
MX35LF4GE4 4Gb 3.3V SPI SLC NAND Macronix equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1