Opens in a new tab

TD501D232H

RS-485 transceiver module, 250kbps, isolated

13314

Effective Inventory

Image for reference only

Manufacturer Part:

TD501D232H

Package:

Module (28x13x8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TD501D232H is an isolated RS-485 transceiver module with 250kbps data rate, 2500VDC isolation, and built-in ESD protection for industrial serial communication.

Key Specifications

Package Module (28x13x8mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: TD501D232H Product Introduction

The TD501D232H is an isolated RS-485 transceiver module with 250kbps data rate, 2500VDC isolation, and built-in ESD protection for industrial serial communication.

Working Principle: TD501D232H Working Principle

The TD501D232H is an isolated RS-485 transceiver module from u-blox/TD Semiconductor in DIP-10 form factor, combining an RS-485 transceiver with galvanic isolation in a single plug-in module. The module integrates a standard RS-485 transceiver IC with digital isolation (transformer or capacitive coupling) between the logic side (VCC, RXD, TXD, RE, DE) and the bus side (A, B). The isolation barrier provides 2500Vrms withstand voltage, protecting the MCU from ground loops and common-mode voltage transients common in industrial environments. The 250kbps data rate supports RS-485 communication up to 1200m at lower speeds. The RE (Receiver Enable, active LOW) and DE (Driver Enable, active HIGH) pins control bus direction: typically RE and DE are tied together for half-duplex operation (receive mode when LOW, transmit mode when HIGH). The module approach eliminates the need for external isolation components (optocouplers, isolated DC-DC), reducing BOM count and PCB area. The DIP-10 footprint allows through-hole mounting for easy prototyping and replacement. The ISO-GND and ISO-VCC pins provide power to the isolated bus side, either from the internal isolated supply or from an external source. Applications include industrial automation, building control, and meter reading systems.

Pin Description: TD501D232H Pin Definition and Functions
Pin Name Type Function
1 VCC Power Module supply (3.3V or 5V)
2 RXD Output Receiver data output (to MCU UART RX)
3 TXD Input Transmitter data input (from MCU UART TX)
4 GND Power Ground
5 A I/O Non-inverting RS-485 bus pin
6 B I/O Inverting RS-485 bus pin
7 RE Input Receiver enable (active low)
8 DE Input Driver enable (active high)
9-10 ISO-GND/ISO-VCC Power Isolated side power (optional)
Application Scenarios: In which products and applications is TD501D232H used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for TD501D232H
    Manufacturer Part Number Package Notes
    u-blox TD501D232H DIP-10 Same device, module format
    TI ISO3531DR SOIC-16 Isolated RS-485, 1Mbps, chip-level
    Analog Devices ADM2587EBRWZ SOIC-20 Isolated RS-485, 500kbps, 2.5kV
    Silicon Labs SI8641BB-D-IS1 SOIC-16 Digital isolator + external transceiver
    Maxim MAX14850ASE+ SOIC-16 Isolated RS-485, 25Mbps, chip-level

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1