Opens in a new tab

THVD1419DT

RS-485 transceiver, 250kbps, integrated surge protection, +/-2.5kV, 3-5.5V, SOIC-8, -40 to +125C

5200

Effective Inventory

Image for reference only

Manufacturer Part:

THVD1419DT

Package:

SOIC-8 (4.90 x 3.91 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The THVD1419DT from Texas Instruments is a 3.3V to 5V half-duplex RS-485 transceiver with integrated surge protection. By embedding TVS diodes in the standard 8-pin SOIC package, it provides IEC 61000-4-5 2.5kV surge protection without external components, making it ideal for robust industrial and building automation communication links.

Key Specifications

Supply Voltage 3 V to 5.5 V
Signaling Rate 250 kbps
Duplex Half
ESD Protection (IEC Contact) +/-8 kV
Surge Protection (IEC 61000-4-5) +/-2.5 kV
Common-Mode Range +/-12 V
Receiver Hysteresis 30 mV
Standby Current < 2 uA
Operating Temperature -40C to +125C

Features

  • Integrated TVS diodes provide IEC surge protection without external components
  • +/-8kV IEC 61000-4-2 contact discharge ESD protection
  • +/-2.5kV IEC 61000-4-5 surge protection for cable transients
  • +/-30kV IEC air-gap discharge protection
  • Wide +/-12V common-mode range for long cable runs
  • Glitch-free power-up/down for hot-plug capability
  • Open, short, and idle bus failsafe receiver
  • 1/8 unit load supports up to 256 bus nodes

Applications

  • Building automation and HVAC RS-485 networks
  • Industrial factory automation and control
  • Smart meters and grid infrastructure
  • Video surveillance communication links
Product Introduction: THVD1419DT Product Introduction

The THVD1419DT from Texas Instruments is a 3.3V to 5V half-duplex RS-485 transceiver with integrated surge protection in a standard SOIC-8 package. The integrated TVS diodes provide IEC 61000-4-5 +/-2.5kV surge protection and IEC 61000-4-2 +/-8kV contact discharge ESD protection, eliminating the need for external protection components and reducing board space. The device supports data rates up to 250 kbps with a wide +/-12V common-mode range suitable for long cable runs. Features include 30 mV receiver hysteresis for noise rejection, glitch-free power-up/down for hot-plug capability, open/short/idle bus failsafe, and 1/8 unit load supporting up to 256 nodes on the bus. Standby current is below 2 uA.

Working Principle: THVD1419DT Working Principle

The THVD1419DT integrates an RS-485 transceiver with TVS surge protection diodes. (1) Transmitter: The driver converts single-ended TTL/CMOS logic levels (D input) to differential RS-485 signals (A and B bus outputs) compliant with TIA/EIA-485A. The driver output is enabled by the DE (driver enable) pin. When disabled, the driver outputs are high-impedance. (2) Receiver: The receiver converts differential RS-485 bus signals (A and B) to single-ended logic levels (R output). The receiver is enabled when RE is low and disabled (high-impedance R output) when RE is high. With 30 mV hysteresis, the receiver rejects noise on the bus. (3) Failsafe: Open, short, and idle bus conditions bias the receiver output to a known high state, preventing erroneous data. (4) Surge Protection: Integrated bidirectional TVS diodes on the A and B bus pins clamp voltage transients from cable-coupled surge events, providing IEC 61000-4-5 +/-2.5kV protection without external components.

Pin Description: THVD1419DT Pin Definition and Functions
Pin Name Type Function
1 R Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 D Input Driver data input
5 GND Ground Ground reference
6 A I/O Non-inverting bus I/O
7 B I/O Inverting bus I/O
8 VCC Power Supply voltage (3-5.5V)
Application Scenarios: In which products and applications is THVD1419DT used
  • Building automation and HVAC RS-485 networks with integrated surge protection
  • Industrial factory automation and control with hot-plug capability
  • Smart meters and grid infrastructure with robust cable transient immunity
  • Video surveillance communication links with IEC 61000-4-5 surge rating
Alternative Models: What chips are recommended as replacements for THVD1419DT
Manufacturer Part Number Package Notes
TI THVD1429DT SOIC-8 20 Mbps version with surge
TI SN65HVD75DR SOIC-8 3.3V, 20Mbps, no surge
Analog Devices ADM3485EARZ SOIC-8 3.3V, 12Mbps
Maxim MAX3485ECSA+ SOIC-8 3.3V, 10Mbps

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1