Opens in a new tab

THVD2450DR

RS-485/422 Half-Duplex Transceiver, 50Mbps, ±18kV ESD, 3.3-5V, SOIC-8

9876

Effective Inventory

Image for reference only

Manufacturer Part:

THVD2450DR

Package:

SOIC-8 (5.0 x 4.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The THVD2450DR from Texas Instruments is a 3.3 V to 5 V RS-485/RS-422 half-duplex transceiver supporting up to 50 Mbps data rates with ±18 kV IEC ESD protection in an SOIC-8 package.

Key Specifications

Type RS-485/RS-422 Half-Duplex Transceiver
Data Rate Up to 50 Mbps
Supply Voltage 3.3 V to 5 V
ESD Protection ±18 kV IEC 61000-4-2 on bus pins
Common-Mode Range -15 V to +15 V
Receiver Input Impedance 1/8 Unit Load (96 kOhm min)
Driver Output Voltage ±2.2 V min (54 Ohm load)
Package SOIC-8 (5.0 x 4.0 mm)
Operating Temperature -40°C to 125°C

Features

  • 50 Mbps high-speed data rate
  • ±18 kV IEC ESD protection on bus pins
  • Wide 3.3 V to 5 V supply range
  • -15 V to +15 V extended common-mode range
  • 1/8 unit load supports up to 256 nodes
  • Hot-plug capable with powered-off high impedance

Applications

  • Industrial automation (Profibus, Modbus)
  • Motion control and motor drives
  • Building automation (BACnet)
  • Backplane and intra-system communication
  • Automotive and robotics networking
Product Introduction: THVD2450DR Product Introduction

The THVD2450DR from Texas Instruments is a high-speed RS-485/RS-422 half-duplex transceiver supporting data rates up to 50 Mbps with ±18 kV IEC 61000-4-2 ESD protection on bus pins. The wide 3.3 V to 5 V supply range provides flexibility in system design. The extended common-mode range of -15 V to +15 V ensures robust communication in noisy industrial environments. The 1/8 unit load receiver input impedance supports up to 256 nodes on a single bus. Hot-plug capability ensures that a device can be connected or disconnected from the bus without disrupting communication.

Working Principle: THVD2450DR Working Principle

The THVD2450DR integrates a differential line driver and a differential line receiver with separate enable controls. The driver converts single-ended TTL/CMOS logic on the DI pin to a differential output on the A and B bus pins. The DE (Driver Enable) pin controls driver output activation. The receiver converts the differential signal on the A and B pins to a single-ended output on the RO pin, enabled by the RE (Receiver Enable, active low) pin. In half-duplex operation, DE and RE are typically tied together. The ±18 kV IEC ESD protection on bus pins uses transient voltage suppression structures that clamp ESD events to safe voltage levels. The extended -15 V to +15 V common-mode range is achieved through a floating receiver design that operates independently of the local ground reference. Hot-plug logic ensures the driver and receiver outputs remain in high-impedance during power-up and power-down transients.

Pin Description: THVD2450DR Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Ground Ground
6 A I/O Non-inverting bus pin
7 B I/O Inverting bus pin
8 VCC Power Supply voltage (3.3-5V)
Application Scenarios: In which products and applications is THVD2450DR used
  • Profibus DP high-speed industrial fieldbus at 12 Mbps
  • Modbus RTU multi-drop serial communication
  • Motion controller and servo drive RS-485 links
  • Backplane communication between rack modules
  • Automotive and robotics real-time control networks
Alternative Models: What chips are recommended as replacements for THVD2450DR
Manufacturer Part Number Package Notes
Texas Instruments SN65HVD08DR SOIC-8 20Mbps, similar family
Analog Devices MAX3490ESA+ SOIC-8 Full-duplex, 10Mbps, 3.3V
STMicroelectronics ST3485EBDR SOIC-8 3.3V, 18Mbps half-duplex
Renesas ISL3179EIBZ SOIC-8 3.3V, 30Mbps
onsemi NCS5762DR2G SOIC-8 5V, 50Mbps, AEC-Q100

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1