Opens in a new tab

TJA1040

High-speed CAN transceiver, ISO 11898, 1Mbps, 5V, standby/wake-up, SOIC8, NXP automotive

9850

Effective Inventory

Image for reference only

Manufacturer Part:

TJA1040

Package:

SOIC-8 (3.9 mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TJA1040 is a high-speed CAN transceiver from NXP Semiconductors, providing a robust physical layer interface between a CAN protocol controller and the twisted-pair CAN bus. Fully compliant with ISO 11898 standard and supporting data rates up to 1 Mbit/s, it features two operating modes: Normal for full transmit/receive operation, and Standby for ultra-low power with bus wake-up capability. The device operates from a 4.5 V to 5.5 V supply and includes a separate VIO pin for direct 3.3 V or 5 V microcontroller I/O interfacing without level shifters. The TJA1040 delivers excellent electromagnetic compatibility (EMC) performance with optimized output slew rates, differential receiver with wide common-mode range, and integrated protection features including thermal shutdown, bus short-circuit withstand capability, and under-voltage detection. AEC-Q100 qualified and packaged in a compact SOIC-8 form factor, it is the industry-standard choice for automotive and industrial CAN networking applications where reliability and low power consumption are critical.

Key Specifications

Standard Compliance ISO 11898-2 / ISO 11898-5
Data Rate Up to 1 Mbit/s
Supply Voltage (VCC) 4.5 V to 5.5 V
I/O Supply (VIO) 3.3 V to 5.5 V
Bus Voltage (CANH/CANL) -27 V to +40 V
Differential Output (Dom) 1.5 V to 3.0 V
Supply Current (Normal) ~50 mA typical (dominant)
Supply Current (Standby) ~10 µA typical
Bus ESD Protection ±8 kV (HBM)
Operating Modes Normal, Standby
Wake-up Detection Yes (bus wake-up in standby mode)
Thermal Shutdown Yes
Bus Short-Circuit Protection Yes (to battery and ground)
Under-Voltage Detection Yes (VCC and VIO)
I/O Voltage Level 3.3 V / 5 V compatible (via VIO)
Temperature Range -40°C to +125°C (automotive)
Qualification AEC-Q100 Grade 1
Package SOIC-8 (3.9 mm width)

Features

  • Fully ISO 11898-2 and ISO 11898-5 compliant
  • Up to 1 Mbit/s data rate
  • Two operating modes: Normal and Standby
  • Very low standby current with bus wake-up
  • Separate VIO supply for 3.3 V / 5 V I/O adaptation
  • Excellent electromagnetic compatibility (EMC)
  • Bus pins protected against automotive transients
  • ±8 kV ESD on CANH/CANL pins (HBM)
  • Bus short-circuit proof (to battery and ground)
  • Thermal shutdown protection
  • Under-voltage detection on VCC and VIO
  • Predictable behavior in all supply states
  • Bus passive when unpowered (zero load)
  • AEC-Q100 qualified (automotive grade) Wide operating temperature: -40°C to +125°C
  • SOIC-8 surface mount package
  • RoHS compliant, halogen-free

Applications

  • Automotive body electronics and body control modules
  • Automotive powertrain and chassis systems
  • Industrial control and factory automation networks
  • CAN-based sensor and actuator networks
  • Medical equipment and diagnostic instruments
  • Building automation and HVAC systems
  • Marine and avionics electronics
  • Automotive infotainment and telematics
  • Electric vehicle subsystems
  • Test and measurement equipment
Product Introduction: TJA1040 Product Introduction

The TJA1040 is a high-speed CAN (Controller Area Network) transceiver from NXP Semiconductors, providing the interface between a CAN protocol controller and the physical CAN bus. Fully compliant with the ISO 11898 standard, it supports data rates up to 1 Mbit/s and is optimized for automotive and industrial applications requiring robust electromagnetic compatibility (EMC) performance. The device features two operating modes: Normal mode for full operation and Standby mode for low-power consumption with bus wake-up capability. Operating from a 4.5 V to 5.5 V supply, it provides 3.3 V and 5 V microcontroller interface compatibility, with dedicated TXD and RXD pins for differential CAN bus communication. The TJA1040 includes comprehensive protection features including thermal shutdown, bus short-circuit protection, under-voltage detection, and 8 kV ESD protection on the bus pins. Offered in an SOIC-8 package, it is AEC-Q100 qualified and widely used in automotive body electronics, industrial control, and other CAN-based networking applications.

Working Principle: TJA1040 Working Principle

The TJA1040 operates as the physical layer interface in a CAN network, translating the logic-level signals from the CAN controller (TXD pin) into differential bus signals (CANH and CANL), and vice versa on the receive path (RXD pin). In Normal mode, when TXD is driven low by the controller, the transceiver pulls CANH high and CANL low, creating a differential voltage (dominant state); when TXD is high, both CANH and CANL rest near 2.5 V (recessive state) with zero differential voltage. The receiver detects the differential voltage on the bus and outputs the corresponding logic level on RXD. In Standby mode, the transceiver draws minimal current while maintaining a low-power receiver that monitors the bus for a wake-up pattern; upon detection, it signals the microcontroller via the RXD pin (or a dedicated wake pin on some variants) to trigger a return to Normal mode. The integrated EMC optimized output drivers with controlled slew rates minimize electromagnetic emissions, while the differential receiver with wide common-mode range provides excellent noise immunity. Protection features include over-temperature shutdown, bus-to-battery and bus-to-ground short-circuit withstand capability, and under-voltage detection on both the VCC and VIO supply pins.

Pin Description: TJA1040 Pin Definition and Functions
Pin No. Symbol Type Description
1 TXD I Transmit data input (from CAN controller, active low)
2 GND P Ground
3 VCC P Supply voltage (4.5 V to 5.5 V)
4 RXD O Receive data output (to CAN controller)
5 VIO P I/O supply voltage (for 3.3V/5V I/O level adaptation)
6 CANL I/O CAN low-level bus line
7 CANH I/O CAN high-level bus line
8 STB I Standby control input (high = standby, low = normal)

Mode Control: STB = Low → Normal mode (full operation); STB = High → Standby mode (low power, wake on bus)

Application Scenarios: In which products and applications is TJA1040 used
  • Automotive body electronics and BCM modules
  • Industrial control and factory automation
  • CAN-based sensor networks
  • Automotive powertrain and chassis systems
  • Medical equipment and instrumentation
  • Building automation and HVAC control
  • Marine electronics
  • Automotive infotainment systems
Alternative Models: What chips are recommended as replacements for TJA1040
Model Manufacturer Features Description
TJA1042 NXP Standby + VIO Enhanced version, separate VIO supply
TJA1044 NXP Standby, 5 Mbps FD CAN FD capable, faster
TJA1050 NXP High-speed only Basic high-speed CAN transceiver
SN65HVD230 TI 3.3V, high-speed TI 3.3V CAN transceiver
MCP2551 Microchip High-speed Microchip CAN transceiver
NCV7342 onsemi Standby, AEC-Q100 onsemi automotive CAN transceiver

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1