Opens in a new tab

TL064CDR

Quad JFET-input op-amp, low power, SOIC-14

11398

Effective Inventory

Image for reference only

Manufacturer Part:

TL064CDR

Package:

SOIC-14 (8.65 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

TL064CDR Overview

The TL064CDR is a quad low-power JFET-input operational amplifier from Texas Instruments, with supply voltage range of 3.5V to 30V, 1MHz gain-bandwidth product, and 30pA input bias current, in a SOIC-14 package, suitable for active filters and signal conditioning.

Key Features

  • Supply voltage: 3.5V-30V
  • Input bias current: 30pA
  • Gain-bandwidth product: 1MHz
  • Slew rate: 3.5V/us
  • Input offset voltage: 3mV
  • Supply current per channel: 200uA
Product Introduction: TL064CDR Product Introduction

The TL064CDR is a quad low-power JFET-input operational amplifier from Texas Instruments in a 14-pin SOIC package, providing four independent op-amp channels in a single device. Each amplifier features 200 uA typical supply current, 1 MHz gain-bandwidth product, and 3.5 V/us slew rate. The JFET input stage provides extremely high input impedance (10^12 Ohm), low input bias current (30 pA typical), and a common-mode input voltage range that includes the positive supply rail. With internal frequency compensation, output short-circuit protection, and EMI filtering, the TL064CDR is the low-power variant of the industry-standard TL074 and TL084 families.

Working Principle: TL064CDR Working Principle

The TL064CDR uses a JFET-input differential pair as the first gain stage, which provides very high input impedance and very low input bias current compared to bipolar-input op-amps. The differential input stage amplifies the voltage difference between the inverting and non-inverting inputs, converting it to a single-ended signal. A high-gain voltage amplifier stage further amplifies this signal, and a class-AB output buffer provides low-impedance output drive capability with short-circuit protection. Internal frequency compensation (a dominant pole capacitor) ensures stability in unity-gain configurations without external components. The JFET input allows the common-mode input voltage to extend to the positive supply rail, enabling single-supply operation in many applications. The trade-off for the low 200 uA per-amplifier quiescent current (compared to 1.4 mA for the TL074) is a slightly lower gain-bandwidth product (1 MHz versus 3 MHz) and slower slew rate (3.5 V/us versus 13 V/us). The integrated EMI filter on the input pins rejects high-frequency interference, improving robustness in electrically noisy environments.

Pin Description: TL064CDR Pin Definition and Functions
Pin Name Description
1 1OUT Amplifier 1 output
2 1IN- Amplifier 1 inverting input
3 1IN+ Amplifier 1 non-inverting input
4 VCC+ Positive supply voltage (up to 18 V)
5 2IN+ Amplifier 2 non-inverting input
6 2IN- Amplifier 2 inverting input
7 2OUT Amplifier 2 output
8 3OUT Amplifier 3 output
9 3IN- Amplifier 3 inverting input
10 3IN+ Amplifier 3 non-inverting input
11 VCC- Negative supply voltage (down to -18 V)
12 4IN+ Amplifier 4 non-inverting input
13 4IN- Amplifier 4 inverting input
14 4OUT Amplifier 4 output

TL064CDR uses the SOIC-14 (D) surface-mount package with standard quad op-amp pinout: Pin 1 = Output 1, Pin 2 = Inverting Input 1 (-), Pin 3 = Non-inverting Input 1 (+), Pin 4 = VCC+, Pin 5 = Non-inverting Input 2 (+), Pin 6 = Inverting Input 2 (-), Pin 7 = Output 2, Pin 8 = Output 3, Pin 9 = Inverting Input 3 (-), Pin 10 = Non-inverting Input 3 (+), Pin 11 = VCC-, Pin 12 = Non-inverting Input 4 (+), Pin 13 = Inverting Input 4 (-), Pin 14 = Output 4. This 14-pin quad op-amp pinout is shared by TL064, TL074, TL084, LM324, LM348, and LF347. The JFET inputs provide 30pA typical input bias current. For through-hole, TL064CN provides the same pinout in PDIP-14.

Application Scenarios: In which products and applications is TL064CDR used
  • Active Filters: Multiple second-order filter stages in a single package for audio and instrumentation signal conditioning
  • Instrumentation Amplifiers: Three-amplifier instrumentation amp topology with the fourth channel for gain or filtering
  • Signal Conditioning: Low-power sensor interface amplifiers in battery-powered data acquisition systems
  • Audio Preamplifiers: Low-noise JFET-input microphone and instrument preamplifier circuits
  • Oscillators and Waveform Generators: Wien-bridge and state-variable oscillators requiring multiple op-amp channels
Alternative Models: What chips are recommended as replacements for TL064CDR
Model Manufacturer GBW Iq/ch Slew Rate Package
TL074CDR Texas Instruments 3 MHz 1.4 mA 13 V/us SOIC-14
TL084CDR Texas Instruments 3 MHz 1.4 mA 13 V/us SOIC-14
LM324DR Texas Instruments 1.2 MHz 0.18 mA 0.5 V/us SOIC-14
MCP6004 Microchip 1 MHz 0.1 mA 0.6 V/us SOIC-14
RC4558DR Texas Instruments 3 MHz 1.5 mA 1.7 V/us SOIC-8

TL064CDR is a quad JFET-input op-amp from TI in SOIC-14. The TL074CDR provides higher 3V/µs slew rate with similar pinout. The TL084CDR offers 13V/µs slew rate for faster signal processing. The LF347DR from TI provides similar JFET performance. For CMOS rail-to-rail, TLC274 offers quad CMOS op-amps in the same DIP-14/SOIC-14 pinout. The OPA4134 from TI/Burr-Brown provides FET-input audiophile-grade performance. The LM324 remains the lowest-cost alternative for general-purpose applications.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1