Opens in a new tab

TL16C752DPFBR

Dual UART, 64-byte FIFO, 3Mbps, 1.62-5.5V, TQFP-48, auto flow control, IrDA, RS-485

10689

Effective Inventory

Image for reference only

Manufacturer Part:

TL16C752DPFBR

Package:

TQFP-48 (7.00 x 7.00 mm, PFB package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TL16C752DPFBR from Texas Instruments is a dual UART with 64-byte FIFOs in a 48-pin TQFP package. Supporting data rates up to 3Mbps with automatic hardware/software flow control, it provides two independent serial communication channels from a single IC.

Key Specifications

Channels 2 (dual UART)
FIFO Depth 64 bytes TX and RX per channel
Max Data Rate 3 Mbps (48MHz clock at 5V/3.3V)
Supply Voltage 1.62 V to 5.5 V
Operating Temperature -40C to +85C
Flow Control Auto hardware (RTS/CTS) and software (XON/XOFF)
Interface Parallel data bus, 8-bit
Modem Control CTS, RTS, DSR, DTR, RI, CD

Features

  • Dual UART with independent 64-byte TX and RX FIFOs per channel
  • 3Mbps data rate at 5V or 3.3V with 48MHz oscillator input
  • Wide 1.62V to 5.5V supply range for mixed-voltage system designs
  • Automatic hardware flow control (auto-RTS/CTS) and software flow control (XON/XOFF)
  • Programmable serial format: 5-8 data bits, even/odd/no parity, 1-2 stop bits
  • IrDA SIR encoder/decoder, RS-485 mode support, and programmable sleep mode
  • Pin compatible with TL16C2550 and SC16C752B

Applications

  • Automotive infotainment and mobile device serial communication
  • Industrial computing and communications equipment dual serial ports
  • White goods and consumer electronics UART expansion
  • Embedded system dual serial interface with modem control
Product Introduction: TL16C752DPFBR Product Introduction

The TL16C752DPFBR from Texas Instruments is a dual universal asynchronous receiver/transmitter (UART) with 64-byte transmit and receive FIFOs in a 48-pin TQFP package. The device incorporates two independent UART channels, each with its own register set and FIFOs, sharing only the parallel data bus interface and clock source. Each channel supports data rates up to 3Mbps with a 48MHz oscillator input clock at 5V or 3.3V supply. The wide 1.62V to 5.5V supply range supports mixed-voltage system designs. The 64-byte FIFOs with programmable trigger levels significantly reduce CPU interrupt overhead by allowing the processor to service larger data blocks. Automatic hardware flow control (auto-RTS and auto-CTS) and software flow control (programmable XON/XOFF characters) prevent data overrun without CPU intervention. The transmission character control register (TCR) stores the received FIFO threshold levels for starting or stopping transmission during flow control. The FIFO RDY register provides TXRDY/RXRDY status for both ports in a single read. Full modem control signals (CTS, RTS, DSR, DTR, RI, CD) are available for each channel. Additional features include IrDA SIR encoder/decoder, RS-485 mode, programmable sleep mode, and internal loopback for diagnostics.

Working Principle: TL16C752DPFBR Working Principle

The TL16C752DPFBR integrates two independent UART channels with shared bus interface. (1) Parallel-to-Serial Conversion: The CPU writes parallel data bytes to the UART transmit holding register (THR). The UART adds the programmed start bit, parity bit, and stop bits, then shifts the data out serially on the TX pin at the programmed baud rate. (2) Serial-to-Parallel Conversion: The UART detects the start bit, samples the incoming data bits at the center of each bit period, checks parity and stop bits, and places the received byte in the receive buffer register (RBR) for CPU reading. (3) Baud Rate Generation: Each channel has a programmable baud rate generator that divides the input clock (XTAL1) by a 16-bit divisor to produce the desired baud rate x16 clock. A prescaler provides an additional divide-by-4 option. (4) FIFO Operation: The 64-byte TX FIFO buffers data written by the CPU, while the 64-byte RX FIFO buffers received data. Programmable trigger levels generate interrupts or DMA requests when the FIFO reaches the threshold. (5) Flow Control: Auto-RTS deasserts RTS when the RX FIFO reaches the halt threshold. Auto-CTS waits for CTS assertion before transmitting. Software flow control sends XOFF/XON characters automatically.

Pin Description: TL16C752DPFBR Pin Definition and Functions
Pin Name Type Function
1-8 D6,D7,RX,TX I/O Data bus and serial I/O channel B
7 CSA I Channel A chip select
8 CSB I Channel B chip select
11 IOW I Write strobe
13 IOR I Read strobe
18-16 A0-A2 I Address select
20 INTA O Channel A interrupt
19 INTB O Channel B interrupt
24 RESET I Reset (active high)
13-14 XTAL1/2 I/O Crystal oscillator
Application Scenarios: In which products and applications is TL16C752DPFBR used
  • Automotive infotainment dual serial port communication at 3Mbps
  • Industrial computing and communications equipment with 64-byte FIFO buffering
  • White goods and consumer electronics UART expansion with auto flow control
  • Embedded system dual serial interface with full modem control and IrDA
Alternative Models: What chips are recommended as replacements for TL16C752DPFBR
Manufacturer Part Number Package Notes
TI TL16C752CIPFBR TQFP-48 Quad UART version
MaxLinear XR16M752IM48-F QFP-48 Pin compatible, dual UART
NXP SC16C752BIA48 TQFP-48 Pin compatible equivalent
TI TL16C2550PFBR TQFP-48 Predecessor, smaller FIFO

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1