Opens in a new tab

TL331BQDBVRQ1

Automotive single comparator, 2-36V, 0.43mA Iq, 2.5mV Vos, 1µs, SOT-23-5, AEC-Q101

9834

Effective Inventory

Image for reference only

Manufacturer Part:

TL331BQDBVRQ1

Package:

SOT-23-5 (DBV) (2.9 x 2.8 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments TL331BQDBVRQ1 is an automotive-qualified single differential comparator featuring an open-collector/open-drain output, wide supply voltage range of 2 V to 36 V, and ultra-low supply current of 0.43 mA. As an improved next-generation version of the industry-standard TL331, it offers lower offset voltage, lower bias current, and faster response time. Housed in a 5-pin SOT-23 package, it is AEC-Q100 Grade 1 qualified.

Key Specifications

Number of Channels 1
Supply Voltage Range 2 V to 36 V
Supply Current (typ) 0.43 mA
Input Offset Voltage (max) 2.5 mV at 25 °C
Input Bias Current (typ) 3.5 nA
Propagation Delay (typ) 1 µs
Output Type Open-collector / Open-drain
Common-Mode Input Range 0 V to 34.5 V (includes ground)
Operating Temperature -40 °C to +125 °C
Package SOT-23-5 (DBV)

Features

  • AEC-Q100 Grade 1 qualified (-40 °C to +125 °C)
  • Improved specifications over legacy TL331-Q1
  • Low input offset voltage: 0.37 mV typical
  • Ultra-low input bias current: 3.5 nA typical
  • Wide supply range: 2 V to 36 V, independent of voltage
  • Input common-mode range includes ground
  • 2 kV HBM ESD rating
  • Open-collector output supports wired-AND configurations

Applications

  • Automotive battery monitoring and undervoltage detection
  • Window comparator circuits in power management
  • eCall backup battery voltage supervision
  • Motor drive overcurrent protection
Product Introduction: TL331BQDBVRQ1 Product Introduction

The Texas Instruments TL331BQDBVRQ1 is an automotive-qualified single voltage comparator and the next-generation improvement of the industry-standard TL331-Q1. It features significantly lower input offset voltage (0.37 mV typical vs. 1.4 mV in legacy versions), lower input bias current (3.5 nA vs. 25 nA), lower supply current (0.43 mA vs. 0.7 mA), and faster propagation delay (1 µs vs. 1.3 µs). The device operates from a wide 2 V to 36 V single supply, with input common-mode range that includes ground, making it ideal for low-side current sensing and ground-referenced voltage monitoring. The open-collector output can be connected to other open-collector outputs for wired-AND logic functions. AEC-Q100 Grade 1 qualification ensures reliable operation in automotive environments from -40 °C to +125 °C. The device is a drop-in replacement for the TL331-Q1, enabling easy upgrades in existing designs.

Working Principle: TL331BQDBVRQ1 Working Principle

The TL331BQDBVRQ1 is a single differential voltage comparator that outputs a logic low when the voltage at the inverting input (-) exceeds the voltage at the non-inverting input (+), and releases (high-impedance) when the non-inverting input is higher. The open-collector output requires an external pull-up resistor to establish the logic high level, and can be connected to other open-collector outputs for wired-AND configurations. The input stage uses a differential pair with PNP input transistors, allowing the common-mode input range to extend down to ground (0 V), which is critical for low-side current sensing applications. The 3.5 nA typical input bias current minimizes error in high-impedance sensing circuits. The 0.37 mV typical offset voltage ensures accurate threshold detection. The device operates from a single supply as low as 2 V, with supply current essentially independent of supply voltage (0.43 mA typical from 5 V to 36 V), making it suitable for battery-powered systems.

Pin Description: TL331BQDBVRQ1 Pin Definition and Functions
Pin Name Type Function
1 IN+ Input Non-inverting comparator input
2 IN- Input Inverting comparator input
3 V- Power Negative supply / Ground
4 OUT Output Open-collector output
5 V+ Power Positive supply (2-36V)
Application Scenarios: In which products and applications is TL331BQDBVRQ1 used
  • Automotive battery undervoltage and overvoltage detection
  • eCall backup battery voltage supervision
  • Window comparator for temperature or voltage monitoring
  • Motor driver overcurrent and short-circuit protection
Alternative Models: What chips are recommended as replacements for TL331BQDBVRQ1
Manufacturer Part Number Package Notes
TI TL331QDBVRQ1 SOT-23-5 Legacy version, higher offset/bias
TI TL331E-Q1 SOT-23-5 Grade 0, -40 to 150°C
TI LM393LV-Q1 SOT-23-8 Dual automotive comparator
Microchip MCP6541T-IOT SOT-23-5 Push-pull output alternative

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1