Opens in a new tab

TL431BIDBZRG4

Shunt Vref 2.495V-36V, 0.5%, SOT-23-3, -40 to 85C

3569

Effective Inventory

Image for reference only

Manufacturer Part:

TL431BIDBZRG4

Package:

SOT-23-3 (2.9×1.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI TL431BIDBZRG4 is a precision adjustable shunt voltage reference. 2.495V to 36V, 0.5% initial accuracy, SOT-23-3 for feedback and bias regulation.

Key Specifications

Reference Voltage 2.495V (adj to 36V)
Initial Accuracy +/-0.5% (B grade)
Min Cathode Current 1 mA
Max Cathode Current 100 mA
Dynamic Impedance 0.2 ohm typ
Temperature Drift 8 ppm/C typ over -40 to 85C
Operating Temp -40 to +85C
Package SOT-23-3

Features

  • 2.495V to 36V adjustable output
  • 0.5% B-grade initial accuracy
  • 8 ppm/C low temperature drift
  • SOT-23-3 compact footprint
  • Industry-standard TL431
  • RoHS compliant

Applications

  • Switching PSU error amplifier
  • LDO feedback reference
  • Isolated DC-DC bias
  • Battery charger voltage reference
Product Introduction: TL431BIDBZRG4 Product Introduction

The TL431BIDBZRG4 from TI is a precision adjustable shunt voltage reference in SOT-23-3 package. The B-grade offers 0.5% initial accuracy at 2.495V. Adjustable from 2.495V to 36V via external resistor divider. 8 ppm/C temperature drift for stable regulation over -40 to 85C. Industry-standard TL431 architecture used in virtually all switching power supply error amplifier circuits.

Working Principle: TL431BIDBZRG4 Working Principle

An internal 2.495V bandgap reference drives the non-inverting input of an internal op-amp. The op-amp output drives an NPN transistor that shunts cathode current. When the reference input (REF) is below 2.495V, the transistor is off. When REF exceeds 2.495V, the transistor conducts, shunting excess current. An external resistor divider from cathode to REF sets the output voltage: Vout = 2.495V * (1 + R1/R2) + Iref * R1.

Pin Description: TL431BIDBZRG4 Pin Definition and Functions
Pin Name Description
1 REF Reference input
2 ANODE Anode (GND)
3 CATHODE Cathode output
Application Scenarios: In which products and applications is TL431BIDBZRG4 used
  • SPSU error amp
  • LDO reference
  • DC-DC bias
Alternative Models: What chips are recommended as replacements for TL431BIDBZRG4
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1