Opens in a new tab

TLC5940NT

16-ch LED driver, 12-bit PWM, 6-bit dot corr EEPROM, 120mA/ch, PDIP-28

5200

Effective Inventory

Image for reference only

Manufacturer Part:

TLC5940NT

Package:

PDIP-28 (35.69 x 6.73 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC5940NT is a 16-channel constant-current sink LED driver from Texas Instruments with 12-bit (4096-step) grayscale PWM, 6-bit (64-step) dot correction with EEPROM, and error detection in a 28-pin PDIP package.

Key Specifications

Number of Channels 16 (constant-current sink)
Grayscale Resolution 12-bit (4096 steps) per channel
Dot Correction 6-bit (64 steps) per channel, stored in EEPROM
Max Output Current 0-60mA (VCC<3.6V), 0-120mA (VCC>3.6V)
LED Supply Voltage Up to 17V
VCC (Logic) 3V to 5.5V
Current Reference External resistor (IREF = 1.24V / R_IREF × 31.5)
Serial Data Rate 30MHz max
Cascade Support Yes (SIN/SOUT daisy-chain)
Error Detection LOD (LED Open Detect), TEF (Thermal Error Flag)
XERR Output Open-drain, OR-able across multiple ICs
Operating Temperature -40°C to +85°C
Package PDIP-28 (35.69 x 6.73mm)

Features

  • 16-channel constant-current sink LED driver
  • 12-bit (4096-step) grayscale PWM brightness per channel
  • 6-bit (64-step) dot correction per channel for LED matching
  • Dot correction stored in integrated EEPROM (auto-recall on power-up)
  • Single external resistor sets max current for all 16 channels
  • LED open detection (LOD) and thermal error flag (TEF)
  • 30MHz serial data interface with daisy-chain capability
  • Controlled in-rush current on output enable
  • BLANK pin resets PWM counter and disables all outputs

Applications

  • Monocolor, multicolor, and full-color LED displays
  • LED signboards and video walls
  • Display backlighting
  • General and high-current LED drive
  • RGB LED matrix and artistic lighting
Product Introduction: TLC5940NT Product Introduction

The TLC5940NT from Texas Instruments is a 16-channel constant-current sink LED driver with 12-bit (4096-step) grayscale PWM control and 6-bit (64-step) dot correction per channel. The dot correction compensates for brightness variations between individual LEDs and different driver ICs, and the correction data is stored in integrated EEPROM for automatic recall on power-up. A single external resistor on the IREF pin sets the maximum current for all 16 channels using the internal 1.24V bandgap reference (Imax = 1.24V / R_IREF × 31.5). The 12-bit grayscale PWM provides 4096 brightness levels per channel for smooth dimming and color mixing. The 30MHz serial interface supports daisy-chaining multiple TLC5940 devices through SIN/SOUT connections. Error detection includes LED Open Detection (LOD) and Thermal Error Flag (TEF), reported through the open-drain XERR pin that can be OR-ed across multiple ICs. The NT suffix denotes the 28-pin PDIP through-hole package.

Working Principle: TLC5940NT Working Principle

The TLC5940NT operates as a constant-current sink driver where each of the 16 output channels sinks current from the LED anode supply (up to 17V) through the LED to ground. The maximum per-channel current is set by a single external resistor on the IREF pin: the internal 1.24V bandgap reference drives a current through R_IREF, which is then multiplied by 31.5 to set the maximum channel current. The 6-bit dot correction register (64 steps) scales this maximum current on a per-channel basis to compensate for LED brightness variations; this value is stored in EEPROM and automatically recalled on power-up. The 12-bit grayscale PWM register (4096 steps) controls the duty cycle of each channel’s output during each PWM period. The GSCLK pin provides the PWM clock, and the 12-bit counter counts from 0 to 4095 for each PWM cycle. The BLANK pin resets the counter and forces all outputs off. When BLANK goes low, the counter starts and each channel’s output turns on; when the counter value matches the channel’s grayscale value, that output turns off. The serial interface shifts data in through SIN on the rising edge of SCLK; the XLAT pin latches the data into the internal registers. Multiple devices are daisy-chained by connecting SOUT to the next device’s SIN. The LOD circuit detects when an output pin voltage is below the expected threshold (indicating an open or disconnected LED), and the TEF circuit detects overtemperature conditions. Both errors pull the open-drain XERR pin low.

Pin Description: TLC5940NT Pin Definition and Functions
Pin Name Type Description
1 OUT1 Output Channel 1 constant-current output
2-7 OUT2-OUT7 Output Channels 2-7 constant-current outputs
8 OUT8 Output Channel 8 constant-current output
9 OUT9 Output Channel 9 constant-current output
10-15 OUT10-OUT15 Output Channels 10-15 constant-current outputs
16 XERR Output Error output (open-drain, LOW = LOD or TEF)
17 SOUT Output Serial data output (to next device SIN)
18 GSCLK Input Grayscale PWM clock
19 DCPRG Input Dot correction program select (L=EEPROM, H=register)
20 IREF Input Reference current (connect R to GND)
21 VCC Power Logic supply (3V to 5.5V)
22 GND Power Ground
23 BLANK Input Blank all outputs (HIGH=off, also resets GS counter)
24 XLAT Input Latch data (rising edge latches serial data)
25 SCLK Input Serial data clock (up to 30MHz)
26 SIN Input Serial data input (MSB first)
27 VPRG Input Program mode select (L=GS mode, H=DC mode)
28 OUT0 Output Channel 0 constant-current output
Application Scenarios: In which products and applications is TLC5940NT used
  • LED Video Walls: 12-bit grayscale (4096 levels) per channel provides smooth color gradients; daisy-chain 10+ ICs for 160+ LED control from one MCU
  • RGB Signage: Dot correction EEPROM compensates for LED bin variations, ensuring uniform brightness across large displays
  • Art Lighting: 120mA per channel drives high-power LEDs directly; external R_IREF adjusts global brightness
  • Fault Monitoring: LOD detects broken LEDs; XERR can be OR-ed across all ICs to a single MCU interrupt pin
  • Prototyping: PDIP-28 package plugs into breadboards for quick LED matrix development
Alternative Models: What chips are recommended as replacements for TLC5940NT
Model Manufacturer Key Difference Package Specs
TLC5940PWP TI Same in HTSSOP-28 surface-mount – –
TLC59401RHB TI Same in VQFN-32 (5x5mm), newer process – –
TLC5947PWP TI 24 channels, 12-bit PWM, no EEPROM dot corr – –
IS31FL3731-QFLS4 Lumissil 8×16 matrix, 8-bit PWM, I2C, QFN-28 – –
MAX7219CNG ADI/Maxim 8-digit 7-seg driver, 16-bit PWM, DIP-24 – –

TLC5940NT is a 16-channel PWM LED driver from TI in PDIP-28. The TLC5940RHR provides the same in QFN-32 for surface-mount. The TLC5947 provides 24-channel with 12-bit PWM in HTSSOP-28. The IS31FL3731 from ISSI offers 16×8 LED matrix driver in QFN-28. The MAX7219 from ADI/Maxim drives 8×7-segment displays with SPI. The HT16K33 from Holtek provides 16×8 LED matrix with I2C. The PCA9685 from NXP offers 16-channel 12-bit PWM for servos and LEDs in TSSOP-28.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1