Opens in a new tab

TLIN1029DRQ1

LIN transceiver, LIN 2.2, 20kbps, ±45V bus, AEC-Q100, SOIC-8

14177

Effective Inventory

Image for reference only

Manufacturer Part:

TLIN1029DRQ1

Package:

SOIC-8 (4.90 x 3.91 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLIN1029DRQ1 from Texas Instruments is an automotive-qualified LIN transceiver with dominant state timeout protection, supporting LIN 2.0/2.1/2.2/2.2A and ISO 17987-4.2 standards.

Key Specifications

Manufacturer Texas Instruments
Protocol LIN 2.0/2.1/2.2/2.2A, ISO 17987
Data Rate 20 kbps (LIN), 100 kbps (receiver)
Supply Voltage 4V to 36V
Bus Fault Protection ±45V
Sleep Current <10 µA typical
ESD (HBM) ±8 kV
Package SOIC-8
Operating Temperature -40°C to +125°C
Qualification AEC-Q100 Grade 1

Features

  • LIN 2.0 through 2.2A compliant
  • ISO 9141 (K-Line) support
  • Dominant state timeout (DTO) protection
  • Ultra-low sleep current
  • Local and bus wake-up
  • Integrated 45kΩ pull-up with diode
  • Thermal shutdown
  • VSUP undervoltage protection

Applications

  • Body electronics and lighting
  • HVAC control modules
  • Seat control systems
  • Door modules
Product Introduction: TLIN1029DRQ1 Product Introduction

The TLIN1029DRQ1 from Texas Instruments is an automotive-qualified LIN transceiver supporting LIN 2.0 through 2.2A and ISO/DIS 17987-4.2. It features dominant state timeout (DTO) protection preventing bus lockup from stuck-dominant conditions. The wide 4V to 36V supply with ±45V bus fault protection provides robust operation. Ultra-low sleep current with both local (EN pin) and remote (LIN bus) wake-up minimizes battery drain.

Working Principle: TLIN1029DRQ1 Working Principle

The TLIN1029 converts between MCU UART signals and LIN bus levels. The transmitter drives the LIN bus through an internal MOSFET. The receiver decodes bus voltages using threshold comparators. In sleep mode, a wake-up detector monitors the bus. The DTO feature monitors TXD, forcing the driver inactive if TXD is held dominant beyond timeout, preventing bus lockup. An integrated 45kΩ pull-up resistor with series diode supports slave node configurations.

Pin Description: TLIN1029DRQ1 Pin Definition and Functions
Pin Name Function
1 TXD Transmit data from MCU
2 RXD Receive data to MCU
3 EN Enable/sleep control
4 NWAKE Wake-up input
5 GND Ground
6 LIN LIN bus connection
7 VSUP Supply voltage
8 VIO I/O voltage reference
Application Scenarios: In which products and applications is TLIN1029DRQ1 used
  • Automotive body module communication
  • Door and seat control networks
  • HVAC damper motor control
  • Interior lighting LIN networks
Alternative Models: What chips are recommended as replacements for TLIN1029DRQ1
Manufacturer Part Number Notes
TI TLIN1021DRQ1 Without wake pin
NXP TJA1021T Industry standard LIN
Infineon TLE7259-3GE Similar LIN transceiver

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1