Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » TLP2710(D4-TP.E(T

TLP2710(D4-TP.E(T

IGBT gate drive photocoupler, 2.5A peak, SO6L

5462

Effective Inventory

Image for reference only

Manufacturer Part:

TLP2710(D4-TP.E(T

Package:

SO6L (6.5 x 4.6 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

TLP2710(D4-TP.E(T Overview

The TLP2710 is a high-speed IGBT gate drive photocoupler from Toshiba with 2.5A peak output current, 5000VRMS isolation voltage, 200ns propagation delay, suitable for inverter and converter IGBT driving.

Key Features

  • Isolation voltage: 5000VRMS
  • Peak output current: 2.5A
  • Propagation delay: 200ns
  • Supply voltage: 15V-30V
  • IGBT drive voltage: up to 1200V
Product Introduction: TLP2710(D4-TP.E(T Product Introduction

The TLP2710 is a high-speed logic-output optocoupler from Toshiba in an SO6L surface-mount package (3.84 x 10 x 2.1 mm), providing 5000 Vrms isolation voltage and 25 kV per microsecond common-mode transient immunity (CMTI). It features a 5 Mbps data rate with totem-pole (buffer logic) output, 250 ns maximum propagation delay, and ultra-low 0.3 mA supply current. The device operates from 2.7 V to 5.5 V supply voltage over the -40 C to +125 C temperature range, with a threshold input current of only 1.0 mA maximum for direct microcontroller drive. Safety approvals include UL 1577, cUL, and VDE EN 60747-5-5 (enhanced insulation class with D4 option).

Working Principle: TLP2710(D4-TP.E(T Working Principle

The TLP2710 combines a GaAs infrared LED on the input side with an integrated photo-detector IC on the output side, separated by an optically transparent insulator providing 5000 Vrms galvanic isolation. When forward current flows through the input LED (typically 1 mA threshold), the emitted infrared light is detected by the photo-IC, which amplifies the photocurrent and drives the totem-pole output buffer to the appropriate logic level. The totem-pole output actively drives both high and low states, unlike open-collector optocouplers that require external pull-up resistors. An internal Faraday shield between LED and detector provides the high 25 kV per microsecond CMTI by suppressing capacitive coupling of common-mode transients. The photo-IC integrates a comparator with hysteresis for clean switching, plus a buffer stage that provides the logic output. A 0.1 microfarad bypass capacitor between VDD (pin 6) and GND (pin 4) is required for stable operation.

Pin Description: TLP2710(D4-TP.E(T Pin Definition and Functions
Pin Name Description
1 Anode LED anode; connect through current-limiting resistor to input signal
2 N/C No connect; leave floating
3 Cathode LED cathode; connect to input ground or driver sink
4 GND Output side ground
5 VO Logic output; totem-pole active drive, both source and sink capability
6 VDD Output side supply (2.7 V to 5.5 V); requires 0.1 uF bypass capacitor to GND

TLP2710 uses the SO6L (6-SOIC, 7.5mm wide) package from Toshiba with Pin 1 = Anode (LED+), Pin 2 = NC (no connect), Pin 3 = Cathode (LED-), Pin 4 = GND, Pin 5 = VO (logic output), Pin 6 = VDD. The internal structure consists of an infrared LED on the input side (Pins 1,3) coupled to a photo-IC detector on the output side (Pins 4-6). The NC pin 2 is left floating. The push-pull (totem-pole) output on Pin 5 actively drives both HIGH and LOW levels without an external pull-up resistor. The wide-body SO6L package (7.5mm vs 3.9mm standard SOIC) provides the 5kVrms creepage/clearance distance for reinforced insulation. Pin 1 is identified by a dot or notch on the package.

Application Scenarios: In which products and applications is TLP2710(D4-TP.E(T used
  • PLC Digital I/O Isolation: Isolated digital input modules in programmable logic controllers requiring 5 kV isolation
  • Inverter Gate Drive: Isolated PWM signal transmission to IGBT/SiC gate driver circuits
  • Battery Management Systems: Isolated communication interface between high-voltage battery packs and control MCUs
  • Industrial Communication: RS-485/CAN bus isolation with high CMTI for noisy factory environments
  • Medical Equipment: Patient-isolated digital signal path in diagnostic and monitoring instruments
Alternative Models: What chips are recommended as replacements for TLP2710(D4-TP.E(T
Model Manufacturer Rate CMTI Isolation Output Package
TLP2745 Toshiba 10 Mbps 25 kV/us 5000 Vrms Open-drain SO6L
HCPL-0611 Broadcom 10 Mbps 15 kV/us 3750 Vrms TOtem-pole SO-8
ISO7710DR Texas Instruments 100 Mbps 100 kV/us 5000 Vrms CMOS SOIC-8
ADuM1201 Analog Devices 25 Mbps 25 kV/us 2500 Vrms CMOS SOIC-8
SFH617A-3 ams-OSRAM 1 Mbps N/A 5300 Vrms Open-collector DIP-4

TLP2710 is a 5Mbps high-speed logic-output optocoupler from Toshiba in SO6L with 5kVrms isolation and ±25kV/µs CMTI. The TLP2745 offers 10Mbps higher speed in the same SO6L package. TLP2710(D4 is the tape-and-reel version. For lower-cost alternatives, PC817 provides phototransistor output at lower speed (100kbps). ACPL-M61L from Broadcom/Avago offers 25Mbps in a smaller SO-6 package for space-constrained designs.

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1