Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » TLP290-4(GB-TPE(T

TLP290-4(GB-TPE(T

Quad photocoupler, 4-ch, 3750Vrms isolation, 50-600% CTR, MFSOP-16, -55 to +125C

4200

Effective Inventory

Image for reference only

Manufacturer Part:

TLP290-4(GB-TPE(T

Package:

MFSOP-16 (9.73 x 4.42 x 2.29 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLP290-4 from Toshiba is a quad-channel photocoupler consisting of four optically coupled isolated pairs employing GaAlAs infrared LEDs and photo-detectors. Providing galvanic isolation of 3750Vrms in a compact 16-pin MFSOP package, it is ideal for high-density isolation applications in industrial control, inverters, and communication interfaces.

Key Specifications

Number of Channels 4
Isolation Voltage 3750 Vrms (min)
Current Transfer Ratio (CTR) 50% to 600% @ IF=5mA
Forward Current (IF) 50 mA (max)
Collector-Emitter Voltage 80 V
Propagation Delay 3 us (typ)
Operating Temperature -55C to +125C
Package MFSOP-16 (4-pin isolation)

Features

  • 4 isolated channels in a compact MFSOP-16 package for high-density designs
  • 3750Vrms isolation voltage for reinforced galvanic isolation
  • Wide CTR range of 50% to 600% for design flexibility
  • High-speed response with 3 us typical propagation delay
  • Surface-mount package suitable for automated assembly
  • Safety approvals: UL, cUL, VDE

Applications

  • Industrial inverter and motor drive isolation
  • PLC digital I/O isolation
  • Switching power supply feedback isolation
  • Communication interface isolation (RS-485, CAN)
Product Introduction: TLP290-4(GB-TPE(T Product Introduction

The TLP290-4 from Toshiba is a quad-channel photocoupler providing four electrically isolated signal paths in a single MFSOP-16 surface-mount package. Each channel consists of a GaAlAs infrared LED optically coupled to a silicon photo-detector, achieving 3750Vrms minimum isolation voltage. The device offers a wide current transfer ratio (CTR) range of 50% to 600% at IF=5mA, with 3 us typical propagation delay and 80V collector-emitter voltage rating. The compact MFSOP-16 package enables high-density isolation designs with a minimum creepage and clearance of 5.08mm. The device operates over a -55C to +125C temperature range and carries UL, cUL, and VDE safety approvals.

Working Principle: TLP290-4(GB-TPE(T Working Principle

The TLP290-4 uses optical coupling to transmit electrical signals across an isolation barrier. (1) LED Transmitter: When forward current flows through the GaAlAs infrared LED (anode to cathode), it emits infrared light with intensity proportional to the forward current. (2) Optical Coupling: The emitted light crosses an optically transparent but electrically insulating dielectric barrier, providing galvanic isolation of 3750Vrms between input and output. (3) Photo-detector Receiver: The silicon photo-detector converts the received light back into electrical current. The ratio of output current to input LED current is the current transfer ratio (CTR), which ranges from 50% to 600% depending on operating conditions and device grade. (4) Signal Transmission: Digital signals are transmitted by switching the LED current on and off. The photo-detector output follows the LED input with a typical propagation delay of 3 us, suitable for signal rates up to approximately 100 kHz.

Pin Description: TLP290-4(GB-TPE(T Pin Definition and Functions
Pin Name Type Function
1 AN1 Input Ch1 LED anode
2 CA1 Input Ch1 LED cathode
3 AN2 Input Ch2 LED anode
4 CA2 Input Ch2 LED cathode
5 NC – No connection
6 EO2 Output Ch2 photo-detector emitter
7 CO2 Output Ch2 photo-detector collector
8 EO1 Output Ch1 photo-detector emitter
9 CO1 Output Ch1 photo-detector collector
10 CO3 Output Ch3 photo-detector collector
11 EO3 Output Ch3 photo-detector emitter
12 NC – No connection
13 CA3 Input Ch3 LED cathode
14 AN3 Input Ch3 LED anode
15 CA4 Input Ch4 LED cathode
16 AN4 Input Ch4 LED anode
Application Scenarios: In which products and applications is TLP290-4(GB-TPE(T used
  • Industrial inverter and motor drive gate drive signal isolation with 3750Vrms rating
  • PLC digital I/O module isolation with 4 channels in one IC
  • Switching power supply feedback loop isolation for primary-secondary coupling
  • Communication interface isolation (RS-485, CAN bus) in noisy environments
Alternative Models: What chips are recommended as replacements for TLP290-4(GB-TPE(T
Manufacturer Part Number Package Notes
Toshiba TLP291-4 MFSOP-16 Higher CTR version
Vishay VO2601 SOP-16 Quad optocoupler, similar specs
Everlight EL3H7(B)(TA)-G SOP-16 Quad optocoupler alternative
Sharp PC425S1NIP0F SOP-16 Quad optocoupler

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1