Opens in a new tab

TLV2252AQDRQ1

Dual RRIO Op-Amp, 55uA/ch, 507kHz, AEC-Q100 G1, SOIC-8

6789

Effective Inventory

Image for reference only

Manufacturer Part:

TLV2252AQDRQ1

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV2252AQDRQ1 from Texas Instruments is a dual rail-to-rail I/O op-amp with 55uA Iq per channel, 507kHz GBW, and AEC-Q100 Grade 1 qualification in an SOIC-8 package.

Key Specifications

Type Dual Rail-to-Rail I/O Operational Amplifier (Automotive)
AEC-Q100 Grade 1 (-40C to +125C)
Supply Voltage 2.7V to 8.0V
Quiescent Current 55 uA per channel (typical)
Gain-Bandwidth Product 507 kHz
Slew Rate 0.24 V/us
Input Offset Voltage +/-100 uV (typical)
Input Bias Current 1 pA (typical)
CMRR 85 dB (typical)
Rail-to-Rail Input and Output
Package SOIC-8 (4.9 x 3.9 mm)
Operating Temperature -40C to +125C

Features

  • AEC-Q100 Grade 1 automotive qualified
  • 55 uA per channel low quiescent current
  • Rail-to-rail input and output
  • 507 kHz GBW at 5V
  • 1 pA typical input bias current (CMOS input)
  • Enhanced ESD protection (4 kV HBM)

Applications

  • Automotive sensor signal conditioning
  • Battery-powered instrumentation
  • Portable medical devices
  • Low-power active filters
Product Introduction: TLV2252AQDRQ1 Product Introduction

The TLV2252AQDRQ1 from Texas Instruments is a dual rail-to-rail input/output CMOS operational amplifier qualified to AEC-Q100 Grade 1 for automotive applications. The 55 uA per channel quiescent current makes it one of the lowest-power automotive-qualified dual op-amps, suitable for always-on sensor interfaces. The 507 kHz gain-bandwidth product at 5V provides adequate bandwidth for most sensor conditioning and filtering applications. The rail-to-rail input and output swing maximizes dynamic range in low-voltage systems. The 1 pA typical input bias current is ideal for high-impedance sensor interfaces such as photodiodes and pH probes. The Q1 suffix indicates full AEC-Q100 Grade 1 qualification with enhanced ESD protection (4 kV HBM), making it suitable for under-hood automotive applications up to 125C.

Working Principle: TLV2252AQDRQ1 Working Principle

The TLV2252AQDRQ1 uses a CMOS input stage with a folded-cascode architecture that provides rail-to-rail input common-mode range. The input stage uses complementary N-channel and P-channel differential pairs in parallel: when the input voltage is near the negative rail, the P-channel pair is active; near the positive rail, the N-channel pair is active; in the middle, both pairs contribute. This achieves continuous rail-to-rail operation. The 1 pA input bias current is a characteristic of the CMOS input gate, which draws only the leakage current of the input ESD protection diodes. The 55 uA quiescent current is set by the internal bias network. The 507 kHz GBW is the product of the open-loop gain and the -3 dB frequency, determined by the compensation capacitor and the transconductance of the input stage. The rail-to-rail output uses a common-source output stage (not emitter follower), which allows the output to swing within millivolts of both supply rails when lightly loaded.

Pin Description: TLV2252AQDRQ1 Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel A output
2 1IN- Input Channel A inverting input
3 1IN+ Input Channel A non-inverting input
4 GND Power Negative supply / Ground
5 2IN+ Input Channel B non-inverting input
6 2IN- Input Channel B inverting input
7 2OUT Output Channel B output
8 V+ Power Positive supply (2.7-8.0V)
Application Scenarios: In which products and applications is TLV2252AQDRQ1 used
  • Automotive pressure sensor bridge amplifier with AEC-Q100 and 55uA/channel
  • Portable ECG front-end with 1pA input bias for high-Z electrode interface
  • 5V battery-powered active low-pass filter with 507kHz GBW
  • Automotive temperature sensor conditioning with rail-to-rail output from 2.7V supply
Alternative Models: What chips are recommended as replacements for TLV2252AQDRQ1
Manufacturer Part Number Package Notes
TI TLV2252AQDBVRQ1 SOT-23-8 Same device, smaller package
TI TLV2262AQDRQ1 SOIC-8 Higher GBW (1.6 MHz), higher Iq
Microchip MCP6002-I/SN SOIC-8 1MHz RRIO, non-automotive
ADI AD8502ARMZ MSOP-8 Dual 1uA, RRIO, alternative
onsemi NCV20072SN2T1G SOIC-8 Automotive dual RRIO, 1MHz

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1