Opens in a new tab

TLV3491AIDBVR

Single nanopower push-pull comparator, 1.8-5.5V, 0.85uA Iq, 6us delay, rail-to-rail input, SOT-23-5, TI

18400

Effective Inventory

Image for reference only

Manufacturer Part:

TLV3491AIDBVR

Package:

SOT-23-5 (DBV, 2.9 x 2.8 mm, tape & reel)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV3491AIDBVR is a single-channel nanopower push-pull output voltage comparator from Texas Instruments, optimized for ultra-low-power voltage monitoring and threshold detection in battery-powered systems. Operating from a 1.8 V to 5.5 V single supply and consuming only 0.85 uA typical quiescent current, it achieves 6 us propagation delay, an excellent speed-to-power ratio. The rail-to-rail input common-mode range extends 200 mV beyond both supply rails, and the push-pull CMOS output stage eliminates the need for an external pull-up resistor, reducing component count and power consumption. With a maximum offset voltage of 15 mV, 10 pA typical input bias current, and built-in hysteresis for noise immunity, the TLV3491 provides reliable performance across the -40 degC to +125 degC industrial temperature range. Packaged in a tiny 5-pin SOT-23 (DBV) package with a footprint of just 8.12 mm2, it is ideal for space-constrained portable and battery-operated devices. The TLV3491 family also includes dual (TLV3492) and quad (TLV3494) versions in various package options, making it suitable for power-sensitive low-voltage applications including battery monitoring, undervoltage detection, zero-crossing detection, power-on reset, window comparators, and wake-up event detection.

Key Specifications

Number of Channels 1
Output Type Push-Pull (CMOS)
Supply Voltage Range 1.8 V to 5.5 V
Supply Current (Iq) 0.85 uA typical, 1.2 uA max
Propagation Delay 6 us typical
Input Offset Voltage (Vos) 15 mV max @ 25 degC
Input Bias Current 10 pA typical, 100 pA max
Input Common-Mode Range 0.2 V below V- to 0.2 V above V+ (rail-to-rail + 200mV)
Hysteresis Yes (built-in)
Output Sink/Source Current Push-pull CMOS output
Operating Temperature -40 degC to +125 degC
ESD Protection 2 kV HBM
Package SOT-23-5 (DBV)
Footprint Area 8.12 mm2 (2.9 x 2.8 mm)

Features

  • Very low supply current: 0.85 uA typical
  • Push-pull CMOS output stage (no pull-up resistor needed)
  • Rail-to-rail input common-mode range
  • Input range extends 200 mV beyond supply rails
  • Fast response: 6 us propagation delay
  • Supply voltage: 1.8 V to 5.5 V single supply
  • Built-in hysteresis for noise immunity
  • Low input offset voltage: 15 mV max
  • Very low input bias current: 10 pA
  • Compact SOT-23-5 surface mount package
  • Wide temperature range: -40 degC to +125 degC
  • RoHS compliant

Applications

  • Battery-powered and portable electronics
  • Power supply voltage monitoring and supervision
  • Under-voltage and over-voltage detection
  • Zero-crossing detection circuits
  • Window comparators and level detectors
  • Power-on reset (POR) and brown-out detection
  • Relaxation oscillators
  • Wake-up and sleep event detection
  • Headphone jack detection in portable audio
  • Low-voltage two-cell battery systems
  • Energy harvesting applications
  • Wireless sensor networks
Product Introduction: TLV3491AIDBVR Product Introduction

The TLV3491AIDBVR is a single-channel nanopower push-pull output comparator from Texas Instruments, designed for ultra-low-power voltage sensing and threshold detection applications. Operating from a 1.8 V to 5.5 V single supply and consuming only 0.85 uA typical supply current, it delivers 6 us propagation delay with rail-to-rail input common-mode range extending 200 mV beyond both supply rails. The push-pull CMOS output stage eliminates the need for an external pull-up resistor, saving board space and power. The TLV3491 features a maximum input offset voltage of 15 mV, input bias current of just 10 pA, and integrated hysteresis for noise immunity. Packaged in a compact 5-pin SOT-23 (DBV) form factor measuring just 2.9 x 2.8 mm, it is ideal for portable and space-constrained applications. Operating over the -40 degC to +125 degC temperature range, the TLV3491 excels in battery-powered systems, power management, zero-crossing detection, and window comparator circuits where minimal power consumption is critical.

Working Principle: TLV3491AIDBVR Working Principle

The TLV3491 is a voltage comparator that compares two analog input voltages and outputs a digital signal indicating which is larger. It has a non-inverting input (+IN) and an inverting input (-IN). When the voltage at +IN is greater than the voltage at -IN, the push-pull output drives HIGH (close to V+). When +IN is less than -IN, the output drives LOW (close to V-). The push-pull output stage uses both a PMOS high-side driver and an NMOS low-side driver, actively sourcing or sinking current to drive the output to the rail, unlike open-collector comparators that require an external pull-up resistor. The internal design features rail-to-rail input stage, allowing the input common-mode voltage to range from 200 mV below the negative supply to 200 mV above the positive supply. Built-in hysteresis provides noise immunity by creating a small difference between the rising and falling threshold voltages, preventing output chattering from noisy input signals. The CMOS design achieves extremely low quiescent current of under 1 uA while still maintaining reasonable speed (6 us propagation delay), making it suitable for battery-powered and always-on monitoring applications.

Pin Description: TLV3491AIDBVR Pin Definition and Functions
Pin No. Symbol Type Description
1 OUT O Comparator output (push-pull CMOS)
2 V- / GND P Negative power supply (ground)
3 +IN I Non-inverting input
4 -IN I Inverting input
5 V+ / VCC P Positive power supply (1.8 V to 5.5 V)

Package: SOT-23-5 (DBV), body size 2.9 mm x 2.8 mm, surface mount tape and reel packaging.

Ordering Suffix Meaning: AI = Grade A, industrial temp range (-40 to +125 degC); DBV = SOT-23-5 package; R = Tape & reel packaging.

Application Scenarios: In which products and applications is TLV3491AIDBVR used
  • Battery-powered and portable devices
  • Power supply voltage monitoring
  • Under-voltage and over-voltage detection
  • Zero-crossing detection
  • Window comparators and level detectors
  • Power-on reset (POR) circuits
  • Oscillators and relaxation oscillators
  • Wake-up and sleep event detection
  • Headphone jack detection
  • Low-voltage two-cell battery systems
Alternative Models: What chips are recommended as replacements for TLV3491AIDBVR
Model Manufacturer Channels Iq (typ) Delay
TLV3492 TI 2 0.85 uA/ch 6 us
TLV3494 TI 4 0.85 uA/ch 6 us
LPV7215 TI 1 470 nA 12 us
LMC7211 TI 1 8 uA 4 us
MAX9117 ADI 1 0.95 uA 5.6 us
MCP65R41 Microchip 1 1.8 uA 3.5 us

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1