Opens in a new tab

TLV5637IDR-1

Dual 10-bit voltage output DAC, SPI interface, internal reference, 0.8us fast settling, SOIC-8, Texas Instruments

6200

Effective Inventory

Image for reference only

Manufacturer Part:

TLV5637IDR-1

Package:

SOIC-8 (D, 4.9 x 3.91 mm, tape & reel)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV5637IDR-1 is a dual 10-bit voltage-output digital-to-analog converter (DAC) from Texas Instruments, designed for general-purpose applications requiring compact, low-power analog voltage generation. Operating from a single 2.7 V to 5.5 V supply, it features a 3-wire serial interface compatible with SPI, QSPI, and Microwire standards for glueless connection to microcontrollers and DSPs. Each of the two DAC channels uses a resistor string architecture with a rail-to-rail output buffer providing x2 gain and Class-AB output stage for low output impedance and fast settling. A key feature is the programmable settling time – 0.8 us in Fast mode or 2.8 us in Slow mode – enabling designers to optimize speed versus power consumption. The integrated programmable precision reference can supply up to 1 mA and also serve as a system reference. With differential nonlinearity under 0.1 LSB typical and guaranteed monotonicity over temperature, the TLV5637 delivers consistent performance across the -40 degC to +85 degC industrial temperature range. Packaged in an 8-pin SOIC (D) form factor, it is ideal for digital servo control loops, industrial process control, digital offset and gain adjustment, machine and motion control, mass storage device calibration, and other applications requiring compact, low-power dual-channel DAC performance.

Key Specifications

Resolution 10 bits
Number of DAC Channels 2 (Dual)
Architecture Resistor String
Output Type Buffered Voltage Output (rail-to-rail, x2 gain)
Output Voltage Range 0 V to V_ref x 2 (0 V to ~5 V with internal ref)
Digital Interface 3-wire Serial (SPI / QSPI / Microwire compatible)
Supply Voltage (VDD) 2.7 V to 5.5 V
Settling Time (Fast Mode) 0.8 us typical
Settling Time (Slow Mode) 2.8 us typical
INL (Integral Nonlinearity) +/-1 LSB max
DNL (Differential Nonlinearity) +/-0.1 LSB typical
Monotonicity Guaranteed over temperature
Reference Type Internal (programmable) or External
Reference Output Current Up to 1 mA
Output Sink/Source Current +/-1 mA
Power Consumption 4.2 mW typical @ 5 V
Power-Down Mode Yes
Update Rate Up to ~278 kSPS
Operating Temperature -40 degC to +85 degC
Package SOIC-8 (D)

Features

  • Dual 10-bit voltage-output DAC
  • Programmable internal voltage reference
  • Programmable settling time (0.8 us fast / 2.8 us slow)
  • 3-wire serial interface (SPI / QSPI / Microwire compatible)
  • Compatible with TMS320 DSP serial ports
  • Rail-to-rail output buffer with x2 gain
  • Class-AB output stage for stability and fast settling
  • Differential nonlinearity < 0.1 LSB typical
  • Monotonic output over temperature
  • Internal reference can source 1 mA (system reference)
  • Power-down mode for low standby current
  • Single supply: 2.7 V to 5.5 V
  • CMOS implementation, low power
  • Compact 8-pin SOIC package
  • Industrial temperature range: -40 degC to +85 degC
  • RoHS compliant

Applications

  • Digital servo control loops
  • Digital offset and gain adjustment
  • Industrial process control systems
  • Machine and motion control devices
  • Mass storage device calibration
  • Programmable voltage references and sources
  • Data acquisition and test equipment
  • Motor control and precision positioning
  • Audio volume control and tone adjustment
  • Sensor calibration and trimming circuits
  • Battery-powered instrumentation
  • Programmable current sources
  • LED brightness control
  • Automotive electronics
Product Introduction: TLV5637IDR-1 Product Introduction

The TLV5637IDR-1 is a dual 10-bit voltage-output digital-to-analog converter from Texas Instruments, featuring a flexible 3-wire serial interface compatible with SPI, QSPI, and Microwire standards. It operates from a single 2.7 V to 5.5 V supply and includes a programmable internal precision reference, eliminating the need for an external reference in many applications. The device offers programmable settling time: 0.8 us in Fast mode or 2.8 us in Slow mode, allowing designers to optimize speed versus power consumption. Each DAC output is buffered by a rail-to-rail x2 gain Class-AB output amplifier capable of sourcing up to 1 mA. The resistor string architecture ensures monotonic output over temperature with differential nonlinearity of less than 0.1 LSB typical. The TLV5637 is programmed via a 16-bit serial word containing 2 control bits and 10 data bits, supporting both DAC simultaneous and individual update modes. Packaged in an 8-pin SOIC form factor and operating from -40 degC to +85 degC, it is well-suited for digital servo control loops, industrial process control, digital offset/gain adjustment, motion control, and mass storage device applications.

Working Principle: TLV5637IDR-1 Working Principle

The TLV5637 uses a resistor string (string DAC) architecture to convert 10-bit digital values to analog voltage outputs. The resistor string consists of 1024 equal-value resistors connected in series between the reference voltage (or ground) and the positive reference, with each tap point corresponding to one of the 1024 possible digital codes. A decoder switch connects the appropriate tap point to the output buffer based on the digital input code. This architecture ensures inherently monotonic output (output always increases or stays the same with increasing code) and excellent differential linearity. The output of each resistor string feeds a rail-to-rail output buffer amplifier with x2 gain and a Class-AB output stage, which provides low output impedance and fast settling while maintaining stability. The internal programmable reference voltage can be set to one of two values, or an external reference can be used for flexibility. The 3-wire serial interface receives a 16-bit data word containing control bits and 10 data bits, latching the data on the rising edge of the chip select. A power-down mode reduces current consumption to near-zero when not in use. The two DACs can be updated independently or simultaneously, and the programmable settling time allows trade-off between speed and power dissipation.

Pin Description: TLV5637IDR-1 Pin Definition and Functions
Pin No. Symbol Type Description
1 DIN I Serial data input (MSB first)
2 SCLK I Serial clock input
3 CS I Chip select (active low, latches data on rising edge)
4 AGND / GND P Analog ground
5 OUT_B O DAC B voltage output
6 REF I/O Reference voltage input / output (internal ref output or external ref input)
7 OUT_A O DAC A voltage output
8 VDD / VCC P Positive supply voltage (2.7 V to 5.5 V)

Package: SOIC-8 (D), 4.9 mm x 3.91 mm x 1.58 mm, surface mount, tape & reel.

Ordering Info: I = Industrial temperature range (-40 to +85 degC); DR = SOIC-8 tape & reel (2500 pcs/reel)

Application Scenarios: In which products and applications is TLV5637IDR-1 used
  • Digital servo control loops
  • Digital offset and gain adjustment
  • Industrial process control systems
  • Machine and motion control devices
  • Mass storage devices (hard disk calibration)
  • Programmable voltage sources
  • Data acquisition systems
  • Motor control and positioning
  • Audio volume and tone control
  • Sensor calibration and trimming
Alternative Models: What chips are recommended as replacements for TLV5637IDR-1
Model Manufacturer Bits Channels Settling
TLV5638 TI 12 2 1 us
TLV5618A TI 12 2 2.5 us
DAC8552 TI 16 2 10 us
MCP4822 Microchip 12 2 4.5 us
LTC2632 ADI 12 2 6 us
AD5612 ADI 10 2 6 us

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1