Opens in a new tab

TLV9052IDDFR

Dual 5MHz RRIO op amp, 330µA/ch, SOT-23-8

6800

Effective Inventory

Image for reference only

Manufacturer Part:

TLV9052IDDFR

Package:

8-Pin SOT-23 (DDF) (2.9 x 2.8 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV9052IDDFR is a Texas Instruments dual 5MHz GBW RRIO op amp with 1.5V/µs slew rate, 330µA IQ per channel, and 1.8V to 5.5V supply. Packaged in 8-pin SOT-23 (DDF), -40°C to +125°C.

Key Specifications

Channels 2 (dual)
GBW 5 MHz
Slew Rate 1.5 V/µs
IQ 330 µA per channel
Supply 1.8 V to 5.5 V
Vos 0.5 mV typical
Package 8-Pin SOT-23 (DDF)

Features

  • Rail-to-rail input and output
  • 5MHz GBW with 330µA IQ
  • 1.8V to 5.5V single supply
  • 1.5V/µs slew rate
  • EMI hardened inputs
  • SOT-23-8 compact package

Applications

  • Low-power signal conditioning
  • Current sensing
  • Battery-powered instrumentation
  • Portable medical devices
Product Introduction: TLV9052IDDFR Product Introduction

The TLV9052IDDFR is a Texas Instruments dual rail-to-rail input/output CMOS operational amplifier with 5MHz gain-bandwidth product and 330µA per-channel quiescent current, in an 8-pin SOT-23 (DDF) package. The 1.8V to 5.5V supply range supports single-cell Li-ion and 3.3V/5V logic rails. The 5MHz GBW at only 330µA per channel gives an excellent GBW-to-IQ ratio of 15 MHz/mA, making the TLV9052 ideal for battery-powered applications requiring both bandwidth and long battery life. The rail-to-rail input common-mode range extends 200mV beyond both supply rails, and the rail-to-rail output swings within 50mV of the rails with a 10kΩ load. The 0.5mV typical input offset voltage and 1pA input bias current are suitable for precision low-side current sensing and sensor signal conditioning. EMI-hardened inputs reduce susceptibility to RF interference in noisy environments. The DDF (SOT-23-8) package provides a compact footprint for space-constrained designs rated for -40°C to +125°C.

Working Principle: TLV9052IDDFR Working Principle

The TLV9052 uses a complementary CMOS input stage with PMOS and NMOS pairs that provide rail-to-rail input common-mode range. At input voltages near the negative rail, the PMOS pair is active; near the positive rail, the NMOS pair takes over. The transition between pairs is managed by a cross-coupled circuit that minimizes offset voltage shifts across the common-mode range. The 5MHz GBW is set by the dominant-pole compensation capacitor. The class-AB CMOS output stage drives the output to within millivolts of both supply rails. The 330µA per-channel bias current is set by an on-chip reference. EMI filtering is integrated at the input stage to prevent RF rectification.

Pin Description: TLV9052IDDFR Pin Definition and Functions
Pin Mnemonic Description
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 GND Negative supply / GND
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8 V+ Positive supply
Application Scenarios: In which products and applications is TLV9052IDDFR used
  • Low-side current sensing with 25mΩ shunt and 5MHz bandwidth for transient detection
  • Battery-powered portable instrument front-end with 1.8V minimum supply
  • Portable medical sensor amplifier with EMI-hardened inputs in clinical RF environment
  • Low-power active filter with 5MHz GBW in SOT-23-8 footprint
Alternative Models: What chips are recommended as replacements for TLV9052IDDFR
Model Manufacturer Key Difference
TLV9052IDR TI SOIC-8 package
OPA2320AIDGKR TI 20MHz, VSSOP-8
MCP6002-I/SN Microchip 1MHz, lower cost
TSV912IDT ST 8MHz, SOIC-8

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1