Opens in a new tab

TLV9101SIDBVR

Single 16V RRIO op amp, 300uV Vos, 1.1MHz, shutdown, SOT-23-6

6800

Effective Inventory

Image for reference only

Manufacturer Part:

TLV9101SIDBVR

Package:

6-Pin SOT-23 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV9101SIDBVR is a Texas Instruments single 16V RRIO op amp with 1.1MHz GBW, +/-300uV Vos, 120uA IQ, 4.5V/us SR, 110dB CMRR, and shutdown. Packaged in SOT-23-6, -40C to +125C.

Key Specifications

Channels 1 (single)
Supply 2.7 V to 16 V
Vos +/-300 uV typical
GBW 1.1 MHz
CMRR 110 dB
SR 4.5 V/us

Features

  • Rail-to-rail input and output
  • +/-300uV offset voltage
  • +/-0.6uV/C offset drift
  • 1.1MHz GBW, 4.5V/us SR
  • 110dB CMRR
  • 120uA quiescent current
  • Shutdown with 0.5uA IQ

Applications

  • Optical module signal conditioning
  • Portable test and measurement
  • Industrial sensor interface
  • Appliance motor control
Product Introduction: TLV9101SIDBVR Product Introduction

The TLV9101SIDBVR is a Texas Instruments single 16V general-purpose operational amplifier in a 6-pin SOT-23 package with shutdown capability. The +/-300uV typical input offset voltage and +/-0.6uV/C drift provide DC precision suitable for sensor signal conditioning and measurement applications. The 1.1MHz GBW and 4.5V/us slew rate support moderate-speed signal processing. The 110dB CMRR is exceptionally high for a 16V RRIO amplifier, providing excellent common-mode noise rejection in industrial environments. The rail-to-rail input and output capability maximizes dynamic range in single-supply systems. The 120uA quiescent current per amplifier enables low-power operation, and the shutdown feature reduces IQ to 0.5uA for battery-powered and power-sequencing applications. The +/-80mA short-circuit current provides robust output drive for driving low-impedance loads. The 77dB EMIRR at 1.8GHz provides immunity to high-frequency EMI in RF-hostile environments. The S-temperature grade extends operation to -40C to +125C. The IDBV suffix indicates SOT-23-6 with shutdown pin. Packaged in SOT-23-6 rated for -40C to +125C.

Working Principle: TLV9101SIDBVR Working Principle

The TLV9101 uses a CMOS input stage with chopper-stabilized offset correction to achieve the +/-300uV offset and +/-0.6uV/C drift specifications. The rail-to-rail input stage uses complementary PMOS and NMOS input pairs that cover the full supply range. The chopper technique periodically samples and nulls the input offset, storing the correction in an auto-zero capacitor. The output stage uses a class-AB push-pull CMOS configuration that swings to both supply rails. The 1.1MHz GBW is set by the dominant-pole compensation. The 4.5V/us slew rate is achieved by the available current to charge the compensation capacitor during large-signal transients. The shutdown pin (SHDN) disables the amplifier output and reduces IQ to 0.5uA. When SHDN is low, the output is high-impedance, allowing wire-OR multiple amplifiers. The 110dB CMRR results from the chopper-stabilized input stage that continuously nulls common-mode-induced offset variations.

Pin Description: TLV9101SIDBVR Pin Definition and Functions
Pin Mnemonic Description
1 SHDN Shutdown (active low)
2 IN+ Non-inverting input
3 IN- Inverting input
4 V- Negative supply / GND
5 OUT Output
6 V+ Positive supply
Application Scenarios: In which products and applications is TLV9101SIDBVR used
  • Optical module TIA and limiting amplifier with 110dB CMRR and 4.5V/us slew rate
  • Portable test and measurement instrument with +/-300uV offset and shutdown mode
  • Industrial sensor bridge amplifier with 77dB EMIRR for RF-noisy environments
  • Appliance motor current sensing with 16V supply and RRIO dynamic range
Alternative Models: What chips are recommended as replacements for TLV9101SIDBVR
Model Manufacturer Key Difference
TLV9102SIDR TI Dual channel version
OPA991SIDBVR TI Similar 36V, higher BW
TLV9061SIDBVR TI 5.5V, lower voltage
TSZ121 ST Similar chopper op amp

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1