Opens in a new tab

TPA3116D2DADR

50W Stereo Class-D Audio Amp, 8-26V, 92% Efficiency, Power Limiting, HTSSOP-32

6789

Effective Inventory

Image for reference only

Manufacturer Part:

TPA3116D2DADR

Package:

HTSSOP-32 (PowerPAD) (9.7 x 6.4 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPA3116D2DADR from Texas Instruments is a 50W stereo class-D audio amplifier with single-ended or BTL output, programmable power limiting, and 92% efficiency in an HTSSOP-32 package.

Key Specifications

Type Stereo Class-D Audio Power Amplifier
Output Power 50W x 2 (BTL, 24V, 4 Ohm)
Output Configuration SE (stereo) or BTL (mono/bridge-tied)
Supply Voltage 8 V to 26 V
Efficiency 92% (typical)
THD+N 0.05% @ 15W, 1kHz
SNR 105 dB
Power Limit Programmable via external resistor
Gain 20, 26, 32, 36 dB (selectable)
Switching Frequency 1.2 MHz (adjustable)
Package HTSSOP-32 (PowerPAD)
Operating Temperature -40C to +85C

Features

  • 50W per channel stereo BTL output
  • 92% efficiency eliminates need for heatsink
  • Programmable power limiting for speaker protection
  • Four gain settings (20/26/32/36 dB)
  • Single-ended or bridge-tied load operation
  • Integrated self-protection (thermal, overcurrent, short circuit)
  • Auto-recovery from faults

Applications

  • Bluetooth speaker amplifiers
  • Home theater sound bars
  • TV and monitor internal speakers
  • Powered bookshelf and desktop speakers
Product Introduction: TPA3116D2DADR Product Introduction

The TPA3116D2DADR from Texas Instruments is a high-efficiency stereo class-D audio power amplifier capable of delivering up to 50W per channel into 4 Ohm speakers from a 24V supply in BTL configuration. The 92% typical efficiency eliminates the need for a heatsink in many applications. The programmable power limiting feature uses an external resistor to set the maximum output power, protecting speakers from damage at high supply voltages. Four gain settings (20, 26, 32, 36 dB) are selectable via two gain pins. The device supports both single-ended (stereo) and bridge-tied load (mono or stereo) output configurations. Integrated protection circuits include thermal shutdown, overcurrent protection, and short-circuit protection with automatic recovery. The high 1.2 MHz switching frequency allows use of small output filter inductors.

Working Principle: TPA3116D2DADR Working Principle

The TPA3116D2DADR uses a PWM (pulse-width modulation) class-D architecture. The audio input signal is compared with a 1.2 MHz triangle wave in a comparator to generate a PWM signal whose duty cycle is proportional to the instantaneous input voltage. This PWM signal drives a half-bridge (SE mode) or full-bridge (BTL mode) power output stage consisting of low-RDS(on) MOSFETs. An external LC low-pass filter on the output reconstructs the audio signal by removing the switching frequency and its harmonics. In BTL mode, two half-bridges drive the speaker differentially, doubling the voltage swing across the load and providing 4x the output power compared to SE mode with the same supply. The programmable power limiter monitors the output signal level and reduces the duty cycle when it exceeds the threshold set by the PLIMIT resistor, providing speaker protection. The high 92% efficiency is achieved because the output MOSFETs operate as switches (fully on or fully off), dissipating very little power compared to linear amplifiers where the output transistors operate in their linear region.

Pin Description: TPA3116D2DADR Pin Definition and Functions
Pin Group Name Type Function
Dedicated IN_A/IN_B Input Audio inputs (differential)
Multiple OUT_A/OUT_B Output PWM outputs to LC filter
Dedicated PVCC/AVCC Power 8-26V power supply
Dedicated GAIN0/GAIN1 Input Gain selection pins
Dedicated SD/MUTE Input Shutdown and mute control
Dedicated PLIMIT Input Power limit set resistor
Dedicated FAULT Output Fault status output
Dedicated GVDD Power Gate drive supply (7V internal)
Application Scenarios: In which products and applications is TPA3116D2DADR used
  • Bluetooth speaker with 50W+50W stereo output from 24V adapter
  • 2.1 channel sound bar with two 20W satellites + one 50W subwoofer
  • Desktop powered speaker pair with SE output and 15W per channel
  • TV internal 10W+10W speaker amplifier with no heatsink
Alternative Models: What chips are recommended as replacements for TPA3116D2DADR
Manufacturer Part Number Package Notes
TI TPA3118D2DADR HTSSOP-32 30W version, lower supply range
TI TPA3123D2PWPR HTSSOP-28 25W, lower cost
TI TPA3251D2 TQFP-48 175W, high-end, PurePath
Infineon MA5332MS QFN-32 60W, similar class
Analog Devices SSM2529 LQFP-48 2x15W, I2C control

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1