Opens in a new tab

Home » Audio ICs, Integrated Circuits ICs » TPA6132A2RTET

TPA6132A2RTET

25mW stereo headphone amp, DirectPath no DC-block caps, 2.3-5.5V, 4 gain settings, WQFN-16, pop suppression

7234

Effective Inventory

Image for reference only

Manufacturer Part:

TPA6132A2RTET

Package:

WQFN-16 (RTE) – 3 x 3 x 0.75 mm, 0.5mm pitch

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPA6132A2RTET is a 25-mW DirectPath™ stereo headphone amplifier from Texas Instruments featuring patented technology that eliminates the need for output DC-blocking capacitors. Packaged in a compact 16-pin WQFN (RTE) package measuring 3 mm × 3 mm, this device delivers 25 mW per channel into 16 Ω headphones from a single 2.3 V supply while maintaining excellent audio quality and low power consumption.

The TPA6132A2 features fully differential inputs with built-in gain-setting resistors, reducing external component count and improving system noise performance. Four selectable gain settings (–6 dB, 0 dB, 3 dB, 6 dB) are controlled via two logic pins (G0, G1). The device’s patented charge pump architecture generates an internal negative supply, allowing the output to be biased at 0 V for true DC-coupled operation with exceptional low-frequency fidelity.

Active click-and-pop suppression circuitry eliminates audible artifacts during power-up and power-down sequences. The device includes short-circuit and thermal-overload protection, plus ±8 kV HBM ESD protection on the output pins, simplifying compliance with IEC 61000-4-2 ESD standards. With a 2.1 mA typical supply current and shutdown mode consuming less than 1 µA, the TPA6132A2RTET is optimized for portable audio applications.

Key Specifications

Parameter Value
Output Power per Channel 25 mW into 16 Ω @ 2.3 V supply
Supply Voltage Range 2.3 V to 5.5 V
Supply Current 2.1 mA typical (operating)
Shutdown Current Less than 1 µA
Gain Settings –6 dB, 0 dB, 3 dB, 6 dB (pin-selectable)
Output Offset Voltage ±0.5 mV maximum
PSRR 100 dB at 217 Hz, 90 dB at 10 kHz
THD+N Low distortion (DirectPath architecture)
Input Type Fully differential or single-ended
Output Type 0V biased, no DC-blocking cap needed
ESD Protection ±8 kV HBM (output pins)
Package WQFN-16 (RTE), 3×3 mm
Operating Temperature –40°C to 85°C

Features

  • Patented DirectPath™ technology eliminates output DC-blocking capacitors
  • Outputs biased at 0 V for excellent low-frequency fidelity
  • Active click and pop suppression circuitry
  • 25 mW per channel into 16 Ω @ 2.3 V supply
  • Constant maximum output power across 2.3 V to 5.5 V supply range
  • Simplifies design to prevent acoustic shock
  • Fully differential or single-ended input capability
  • Built-in resistors reduce external component count
  • Four selectable gain settings: –6 dB, 0 dB, 3 dB, 6 dB
  • High power supply rejection ratio: 100 dB at 217 Hz
  • Improved RF noise immunity
  • Microsoft Windows Vista™ compliant
  • Short-circuit and thermal-overload protection
  • ±8 kV HBM ESD protection on outputs
  • 2.1 mA typical supply current, <1 µA shutdown
  • Compact 16-pin WQFN package (3 mm × 3 mm)

Applications

  • Smartphones and feature phones
  • Tablets and e-readers
  • Portable media players (PMP)
  • Laptop and notebook computers
  • Bluetooth audio devices and headsets
  • Portable gaming devices
  • Headphone amplifiers and DACs
  • Digital audio players and recorders
Product Introduction: TPA6132A2RTET Product Introduction

The TPA6132A2RTET is a high-performance stereo headphone amplifier from Texas Instruments featuring the patented DirectPath architecture that revolutionizes headphone amplifier design by eliminating the need for output DC-blocking capacitors. Traditional headphone amplifiers require large electrolytic or tantalum output capacitors to block the DC bias from reaching sensitive headphone drivers, which increases cost, consumes board space, and degrades low-frequency response. The DirectPath architecture uses an integrated charge pump to generate a negative supply rail, allowing the output to be biased at 0 V DC, enabling direct coupling to headphones with zero output offset voltage.

Operating from a single 2.3 V to 5.5 V supply, the TPA6132A2 delivers 25 mW per channel into 16 ohm loads. A unique feature is its constant maximum output power across the entire supply voltage range, which simplifies system design for acoustic shock prevention – even as battery voltage drops, the maximum output power remains consistent, preventing sudden volume changes.

The device features fully differential inputs with internally trimmed gain-setting resistors, providing excellent common-mode noise rejection and reducing the number of external components required. Four gain settings (-6 dB, 0 dB, 3 dB, 6 dB) are selectable via two digital control pins, allowing optimization for different audio source levels.

Active click-and-pop suppression circuitry ensures artifact-free power-up and power-down, enhancing user experience. Comprehensive protection features include short-circuit protection, thermal overload protection, and robust ESD performance (±8 kV HBM on output pins). The TPA6132A2 is fully compliant with Microsoft Windows Vista Premium Mobile specifications.

Working Principle: TPA6132A2RTET Working Principle

The TPA6132A2 headphone amplifier operates on TI’s patented DirectPath architecture, consisting of these key functional blocks:

1. Charge Pump: A regulated charge pump generates a negative supply voltage (HPVSS) from the positive supply, creating a symmetric power supply environment for the output stage. This allows the output to be biased at 0 V DC, eliminating the need for output coupling capacitors.

2. Input Stage and Gain Network: The fully differential input stage converts the differential input signal to a single-ended signal for the gain stage. Precision on-chip resistors set the closed-loop gain, which can be selected as -6 dB, 0 dB, 3 dB, or 6 dB via pins G0 and G1. For single-ended operation, the positive input pins are grounded.

3. Output Stage: A class-AB output stage drives the headphone load directly. The 0 V DC bias means that no DC current flows through the headphone voice coil, preventing thermal damage and maintaining driver linearity.

4. Pop Suppression Circuitry: During power-up and power-down, the output is actively controlled to ramp smoothly, eliminating the audible clicks and pops that plague conventional capacitor-coupled designs. The enable pin allows orderly sequencing with the system audio path.

5. Protection Circuits: Thermal shutdown prevents damage from excessive power dissipation, while short-circuit protection limits output current if the output is accidentally shorted to ground or supply. ESD protection diodes on all pins ensure robustness during handling and assembly.

Pin Description: TPA6132A2RTET Pin Definition and Functions
Pin No. Pin Name Type Function
1 INL- Input Left channel inverting input. Coupling cap recommended for AC-coupled sources.
2 INL+ Input Left channel non-inverting input. Ground for single-ended operation.
3 G1 Input Gain select bit 1. Along with G0, sets gain to -6, 0, 3, or 6 dB.
4 G0 Input Gain select bit 0. Logic low = 0, logic high = 1.
5 VDD Power Positive supply voltage, 2.3V to 5.5V. Bypass with 1uF ceramic cap.
6 EN Input Enable pin. Drive high for normal operation, low for shutdown.
7 INR+ Input Right channel non-inverting input. Ground for single-ended operation.
8 INR- Input Right channel inverting input. Coupling cap recommended for AC-coupled sources.
9 C1- Capacitor Charge pump flying capacitor negative terminal. Connect 1uF ceramic to C1+.
10 C1+ Capacitor Charge pump flying capacitor positive terminal. Connect 1uF ceramic to C1-.
11 HPVSS Power Charge pump output (negative supply). Bypass with 1uF ceramic to GND.
12 GND Ground Analog and power ground.
13 OUTR Output Right channel headphone output. Connect directly to headphone (no DC cap).
14 HPVDD Power Headphone amplifier positive supply. Bypass with 1uF ceramic cap to GND.
15 NC – No internal connection. Do not connect externally.
16 OUTL Output Left channel headphone output. Connect directly to headphone (no DC cap).

Note: WQFN package has an exposed thermal pad on the bottom that must be soldered to the PCB ground plane for proper thermal dissipation.

Application Scenarios: In which products and applications is TPA6132A2RTET used
  • Smartphones and Mobile Phones: Integrated headphone amplifiers for cellular phones, where board space is at a premium and low power consumption extends battery life. DirectPath technology saves the cost and space of two output capacitors.
  • Tablets and E-Readers: Portable tablet computers and e-book readers requiring high-quality audio output with minimal PCB footprint and low system cost.
  • Portable Media Players: MP3 players, portable audio players, and personal media devices where audio fidelity and long battery life are key selling features.
  • Laptop Computers: Notebook and netbook computers requiring headphone output that meets Microsoft Windows Vista Premium Mobile audio specifications.
  • Bluetooth Audio and Wireless Headsets: Bluetooth headsets and wireless audio adapters where the TPA6132A2 provides the final analog amplification stage before the headphone drivers.
  • Portable Gaming Devices: Handheld game consoles requiring immersive audio with low distortion and efficient power consumption.
  • USB DACs and Headphone Amps: External USB audio adapters and dedicated headphone amplifiers benefiting from the DirectPath architecture’s low-frequency performance and pop-free operation.
Alternative Models: What chips are recommended as replacements for TPA6132A2RTET

<n

Manufacturer Part Number Output Package Notes
Texas Instruments TPA6130A2RTJR 39mW/16Ω QFN-20 Similar architecture, higher power
Texas Instruments TPA6112A2DGQR 30mW/32Ω MSOP-10 Differential input, needs DC-block caps
National Semi LM4889ITL 125mW/32Ω TO-92 Low-cost through-hole alternative
Maxim MAX97220AETE 120mW/32Ω TQFN-16 DirectDrive, higher power
SGMicro SGM4812YMS10G 60mW/32Ω MSOP-10 Cost-effective alternative
ON Semiconductor NCP2810BFCCT1G 25mW/16Ω WLCSP-9 Tiny package alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1