Opens in a new tab

TPS2051BDGN

500mA high-side power switch, 70mOhm Ron, 2.7V-5.5V, current limit/OTP/UVLO, MSOP-8 PowerPAD

3120

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2051BDGN

Package:

8-MSOP PowerPAD (3 x 3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS2051BDGN from Texas Instruments is a single-channel, current-limited power-distribution switch with an N-channel MOSFET output. It supports 2.7V to 5.5V load voltage, 500mA maximum output current, 70mohm on-resistance, and features current limiting, over-temperature, and UVLO protection in an 8-MSOP PowerPAD package.

Key Specifications

Manufacturer Texas Instruments
Switch Type General Purpose, High Side
Number of Outputs 1
Load Voltage 2.7V ~ 5.5V
Max Output Current 500mA
Rds On (typ) 70 mOhm
Fault Protection Current Limiting, OTP, UVLO
Input Type Non-Inverting
Package 8-MSOP PowerPAD (3 x 3mm)
Operating Temperature -40°C ~ 85°C

Features

  • High-side N-channel MOSFET power switch
  • 500mA maximum continuous output current
  • 70mohm typical on-resistance
  • Fixed current limiting for fault protection
  • Over-temperature shutdown protection
  • Undervoltage lockout (UVLO)
  • Status flag output for fault indication
  • 8-MSOP PowerPAD for efficient thermal dissipation

Applications

  • USB power management and port protection
  • Hot-plug power supply control
  • Peripheral power switching in PCs
  • Industrial load switching and protection
  • Battery-powered system power routing
Product Introduction: TPS2051BDGN Product Introduction

The Texas Instruments TPS2051BDGN is a single-channel current-limited power-distribution switch designed for applications requiring controlled power routing with robust fault protection. The device integrates an N-channel MOSFET with 70mohm typical on-resistance and supports load voltages from 2.7V to 5.5V with up to 500mA continuous current. Built-in current limiting, over-temperature shutdown, and undervoltage lockout protect both the switch and the downstream circuitry from fault conditions. A status flag output provides real-time fault indication to the system controller. The 8-MSOP PowerPAD package ensures efficient thermal management in space-constrained designs.

Working Principle: TPS2051BDGN Working Principle

The TPS2051BDGN operates as a controlled high-side power switch with three main protection subsystems: 1) N-Channel MOSFET Switch: The integrated N-channel MOSFET connects the input supply to the load when enabled. The gate drive circuit ensures the MOSFET is fully enhanced for low 70mohm on-resistance. 2) Current Limiting: When the output current exceeds the fixed threshold (approximately 1A typical), the current-limiting circuit reduces the gate drive to limit the output current, protecting the switch and downstream components. 3) Thermal Protection: A thermal sensor monitors the junction temperature and shuts down the MOSFET if it exceeds approximately 140°C. The device automatically restarts when the temperature drops below the threshold. UVLO ensures the switch remains off until the input voltage is above the minimum operating level.

Pin Description: TPS2051BDGN Pin Definition and Functions
Pin Name Type Function
1 IN Power Input supply voltage (2.7V-5.5V)
2 IN Power Input supply voltage (connected internally)
3 ON Input Active-high enable input (non-inverting)
4 GND Ground Ground connection
5 FLG Output Fault status flag (active-low, open-drain)
6 NC – No connection
7 OUT Output Switched output to load
8 OUT Output Switched output (connected internally)
Pad PowerPAD Thermal Thermal pad, connect to GND plane
Application Scenarios: In which products and applications is TPS2051BDGN used
  • USB port power distribution and overcurrent protection in PCs and hubs
  • Hot-plug power supply control in removable peripherals
  • Industrial load switching with fault detection and reporting
  • Battery-powered systems requiring controlled power routing
  • General-purpose high-side power switching with protection
Alternative Models: What chips are recommended as replacements for TPS2051BDGN
Manufacturer Part Number Package Notes
TI TPS2052BDGN 8-MSOP Dual channel version
TI TPS2041BDGN 8-MSOP P-channel, 200mA, complementary
Diodes Inc AP2171MPG-13 MSOP-8 Similar function, 500mA
TI TPS22915BYFPR DSBGA-4 2A load switch, smaller package
onsemi NCP380LSNAAT1G DFN-8 Adjustable current limit

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1