Opens in a new tab

TPS2062DR

2-ch 1A power switch, 70mOhm, 2.7-5.5V, current limit, SOIC-8

5454

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2062DR

Package:

SOIC-8 (3.9 x 4.9 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS2062DR from Texas Instruments is a dual-channel current-limited power distribution switch in an 8-pin SOIC package. Each channel incorporates a 70mOhm N-channel MOSFET rated for 1A continuous current with 1.5A current limit, operating from 2.7V to 5.5V. Designed for USB and other hot-plug applications requiring short-circuit and overload protection.

Key Specifications

Channels 2
ON Resistance 70 mOhm per channel
Continuous Current 1A per channel
Current Limit 1.5A typical (1.1A min, 1.9A max)
Input Voltage 2.7V to 5.5V
Rise Time 0.6 ms typical
Standby Current 1 uA max
Enable Logic Active-low (EN1, EN2)
Fault Output OC1, OC2 (open-drain, active low)
UVLO Threshold 2.0V typical
Bidirectional Switch Yes
Thermal Protection Yes (135C min, auto-retry)
Operating Temperature -40 to +125 C (junction)
Package SOIC-8 (3.9 x 4.9 mm)
Status Active

Features

  • 70mOhm high-side N-channel MOSFET switch
  • 1A continuous, 1.5A current limit per channel
  • 2.7-5.5V operating voltage
  • 0.6ms soft-start rise time
  • Undervoltage lockout
  • Thermal shutdown with auto-retry
  • Open-drain overcurrent fault output
  • 1uA standby current
  • Bidirectional switch
  • UL listed (File E169910)

Applications

  • USB power distribution
  • Hot-plug power switching
  • Heavy capacitive load driving
  • Short-circuit protected power rails
Product Introduction: TPS2062DR Product Introduction

The TPS2062DR from Texas Instruments is a dual-channel current-limited power distribution switch in an 8-pin SOIC package. The D denotes SOIC-8 package, R denotes tape and reel (2500 pcs/reel). Each channel incorporates a 70mOhm N-channel MOSFET power switch controlled by active-low enable inputs (EN1, EN2). The internal charge pump generates gate drive voltage from supplies as low as 2.7V without external components. When an overcurrent condition occurs, the device switches to constant-current mode at 1.5A typical and asserts the corresponding open-drain OC output after an 8ms deglitch filter. Thermal protection disables the switch at approximately 135C junction temperature with 10C hysteresis for auto-retry. The 0.6ms soft-start rise time limits inrush current into heavy capacitive loads. The bidirectional switch characteristic allows current flow in both directions when enabled. UVLO keeps the switch off until input voltage exceeds 2.0V. The device is UL listed under file E169910.

Working Principle: TPS2062DR Working Principle

The TPS2062DR operates through five subsystems: (1) Power Switch: Each channel has a 70mOhm N-channel MOSFET connecting IN to OUT. An internal charge pump generates the gate voltage above the source to fully enhance the MOSFET. The charge pump operates from 2.7V minimum input. (2) Current Limiting: When load current exceeds the threshold (1.5A typical), the device switches from constant-voltage to constant-current mode, limiting output current while reducing output voltage. The 8ms deglitch timer prevents false OC assertions during normal transients like capacitive load startup. (3) Thermal Protection: Individual thermal sensors monitor each channel. When junction temperature exceeds approximately 135C during an overcurrent event, the channel is disabled. After cooling by approximately 10C, the channel automatically retries. (4) Enable Control: Active-low enable inputs (EN1, EN2) control each channel independently. When disabled, the MOSFET is off and supply current drops to 1uA maximum. (5) UVLO: The undervoltage lockout circuit keeps both switches off until VIN exceeds 2.0V, preventing undefined operation during power-up.

Pin Description: TPS2062DR Pin Definition and Functions
Pin Name Type Description
1 GND Power Ground
2 IN Power Input voltage (2.7-5.5V)
3 EN1 Input Channel 1 enable (active low)
4 OC1 Output Channel 1 overcurrent fault (open-drain)
5 OUT1 Output Channel 1 switch output
6 OUT2 Output Channel 2 switch output
7 OC2 Output Channel 2 overcurrent fault (open-drain)
8 EN2 Input Channel 2 enable (active low)
Application Scenarios: In which products and applications is TPS2062DR used
  • Dual-port USB 2.0 power switch with 1A per channel, OC fault reporting, and 0.6ms soft-start for hot-plug
  • 5V peripheral power switching with active-low MCU enable, thermal auto-retry, and 1uA standby
  • 3.3V and 5V rail sequencing using bidirectional switch characteristic for ORing redundant supplies
  • Short-circuit protected load switch for industrial I/O modules with UL listing for safety compliance
Alternative Models: What chips are recommended as replacements for TPS2062DR
Model Manufacturer Channels Current Notes
TPS2062ADR TI 2 1A Tighter current limit (1.6A typ)
TPS2061DR TI 2 1A Active-high enable
TPS2065DR TI 2 2A Higher current version
AP2145SG-13 Diodes Inc 2 1A Pin-compatible alternative

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1