Opens in a new tab

TPS2557QDRBTQ1

Automotive eFuse, 2.5-6.5V, 0.5-5A adj current limit, rev-current block, VSON-8, AEC-Q100

3774

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2557QDRBTQ1

Package:

VSON-8 (2.5 x 4.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS2557QDRBTQ1 from Texas Instruments is an AEC-Q100-qualified automotive-grade eFuse (smart power switch) with adjustable current limit from 0.5A to 5A in an 8-pin VSON (2.5 x 4 mm) package. It provides overcurrent protection, overtemperature shutdown, reverse-current blocking, and accurate current monitoring output for automotive and industrial applications operating from 2.5V to 6.5V.

Key Specifications

Input Voltage Range 2.5V to 6.5V
Adjustable Current Limit 0.5A to 5A (external resistor)
RDS(ON) 33 mOhm typ (HS + LS)
Current Monitor Output ILM pin (proportional to load current)
Reverse-Current Blocking Yes (auto or controlled)
Overcurrent Response Current limiting with auto-retry
Overtemperature Shutdown Yes (with hysteresis)
Enable Input Active high
Operating Temperature -40°C to +125°C (Q1 automotive)
Package VSON-8 (2.5 x 4.0 x 0.9 mm)
AEC-Q100 Yes (Grade 1)

Features

  • AEC-Q100 Grade 1 qualified for automotive applications
  • Adjustable current limit from 0.5A to 5A via external resistor
  • 33 mOhm RDS(ON) for low voltage drop and power dissipation
  • Accurate current monitor output (ILM) proportional to load current
  • Reverse-current blocking prevents current flow from output to input
  • Overtemperature shutdown with thermal hysteresis auto-recovery
  • Active-high enable input for power sequencing

Applications

  • Automotive USB port protection
  • In-vehicle infotainment power distribution
  • ADAS sensor power rails
  • Industrial hot-swap and inrush current limiting
  • Battery-powered portable equipment
Product Introduction: TPS2557QDRBTQ1 Product Introduction

The Texas Instruments TPS2557QDRBTQ1 is an AEC-Q100 Grade 1 qualified automotive smart power switch (eFuse) providing precision adjustable current limiting from 0.5A to 5A with integrated reverse-current blocking. The device operates from a 2.5V to 6.5V input range and features a low 33 mOhm RDS(ON) power MOSFET for minimal voltage drop and power dissipation. The ILM pin provides an analog output voltage proportional to the load current, enabling real-time current monitoring without an external sense resistor. When the load current exceeds the programmed threshold, the device limits the current and eventually enters thermal shutdown if the overload persists. Reverse-current blocking prevents current flow from the output back to the input during fault conditions, protecting upstream circuitry. The VSON-8 package with exposed thermal pad provides efficient heat dissipation for the 5A current rating.

Working Principle: TPS2557QDRBTQ1 Working Principle

The TPS2557QDRBTQ1 integrates a high-side N-channel power MOSFET with an internal charge pump for gate drive, current sensing, and protection circuits. An external resistor (RILM) connected from the ILM pin to GND sets the current limit threshold: Ilim = K / RILM, where K is an internal constant. An internal sense amplifier measures the load current through the MOSFET by sensing the voltage across a precision internal resistor. When the load current exceeds the set threshold, a regulation loop limits the MOSFET gate voltage to maintain constant current, clamping the output voltage. The ILM pin also provides a voltage proportional to the measured current (VILM = Iload x RILM x K2), allowing the host MCU to monitor real-time power consumption. The reverse-current comparator monitors the voltage difference between IN and OUT; when VOUT > VIN by approximately 15 mV, the MOSFET turns off within 1 microsecond, blocking reverse current. The thermal shutdown circuit disables the MOSFET when the junction temperature exceeds 140°C (typical) and automatically recovers when the temperature drops below the hysteresis threshold.

Pin Description: TPS2557QDRBTQ1 Pin Definition and Functions
Pin Name Description
1 OUT Power output to load
2 OUT Power output to load
3 ILM Current limit set / Current monitor output
4 GND Ground
5 EN Enable input (active high)
6 FAULT Fault indicator output (open-drain, active low)
7 IN Power input from supply
8 IN Power input from supply
Pad PowerPAD Thermal pad (connect to GND plane)
Application Scenarios: In which products and applications is TPS2557QDRBTQ1 used
  • Automotive USB: 5V USB port protection with 2.1A current limit, reverse-current blocking, and fault reporting for in-vehicle infotainment USB charging ports
  • ADAS Sensor Rail: 3.3V rail protection for radar and camera sensors with ILM current monitoring detecting sensor fault conditions
  • Industrial Hot-Swap: Inrush current limiting for plug-in industrial modules with adjustable current limit protecting the backplane supply
  • Battery Equipment: 5A current-limited power switch for portable test equipment with real-time current monitoring via ILM ADC input
  • Power Sequencing: EN input controlled by system power management IC for controlled turn-on/turn-off of subsystem power rails
Alternative Models: What chips are recommended as replacements for TPS2557QDRBTQ1
Model Brand Ilim (A) Vin (V) Package
TPS2556QDRBRQ1 TI 0.5-5 2.5-6.5 VSON-8
TPS259525DSBR TI 0.1-5 2.7-23 VSON-10
LTC4365CTS8 ADI UV/OV 2.5-36 TSOT-23-8
MAX14572ETT+ ADI 0.5-3 2.7-5.5 TDFN-6
TCS241CPR TI 0.5-5 2.5-18 VSSOP-8

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1