Opens in a new tab

TPS543C20RVFT

40A stackable synchronous buck SWIFT converter, ACM, 3/0.9mΩ NexFET, 5x7mm LQFN-40

4286

Effective Inventory

Image for reference only

Manufacturer Part:

TPS543C20RVFT

Package:

40-LQFN-CLIP (5.0 × 7.0 × 0.9 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS543C20RVFT is a 4V to 14V input, 40A synchronous step-down SWIFT converter from Texas Instruments, packaged in a 40-pin LQFN-CLIP (RVF) 5 × 7 mm package. It features internally compensated advanced current-mode control with adaptive internal compensation, integrated 3 mΩ/0.9 mΩ stacked NexFET power stage, and stackable architecture allowing two devices to deliver up to 80A with current sharing and clock synchronization.

Key Specifications

Function 40A Stackable Synchronous Buck SWIFT Converter
Input Voltage 4V to 14V
Output Voltage 0.6V to 5.5V (adjustable)
Output Current 40A continuous (single), 80A (2x stacked)
Integrated FETs 3 mΩ (HS) / 0.9 mΩ (LS) stacked NexFET
Control Mode Advanced Current Mode (ACM) with adaptive compensation
Switching Frequency 300 kHz to 2 MHz (pin-strap programmable)
Reference Voltage 0.6V to 1.1V (pin-strap, 0.5% accuracy)
Stacking 2× for 80A with current/voltage share and CLK sync
Package 40-LQFN-CLIP (5 × 7 mm)
Operating Temperature -40°C to +125°C (junction)

Features

  • Internally compensated advanced current mode control for easy design
  • Integrated 3 mΩ/0.9 mΩ stacked NexFET power stage with lossless current sensing
  • Stackable: two devices for 80A with current share, voltage share, and clock sync
  • Pin-strap programmable switching frequency and reference voltage
    • Asynchronous Pulse Injection (API) and body braking for improved transient performance
    • Differential remote voltage sensing for accurate output regulation

    Applications

    • Data center server CPU and GPU core power delivery
    • High-current FPGA and ASIC POL regulation
    • Storage controller and network processor power
    • Artificial intelligence accelerator power rails
    • Telecom blade server point-of-load conversion
Product Introduction: TPS543C20RVFT Product Introduction

The TPS543C20 is a 40A synchronous step-down converter employing internally compensated emulated peak-current-mode (ACM) control for EMI-sensitive point-of-load applications. The device integrates a 3 mΩ/0.9 mΩ stacked NexFET power stage with lossless low-side current sensing, delivering up to 40A in a compact 5 × 7 mm PowerStack package. Two TPS543C20 devices can be stacked together for up to 80A output with current sharing, voltage sharing, and clock synchronization. The internal integrator and directly amplifying ramp tracking loop eliminate the need for external compensation over a wide range of operating frequencies, simplifying system design. Optional API and body braking features improve transient performance by reducing undershoot and overshoot respectively.

Working Principle: TPS543C20RVFT Working Principle

The TPS543C20 uses an advanced current mode (ACM) control architecture with adaptive internal compensation. The inner current loop senses the inductor current through the low-side NexFET’s RDS(on) for lossless current sensing. The outer voltage loop compares the remotely sensed output voltage (via differential VSENSE pins) with the pin-strap programmable reference (0.6V to 1.1V) and drives the current loop through an internal integrator. The adaptive compensation network automatically adjusts its parameters based on the programmed switching frequency and output filter characteristics, eliminating the need for external compensation components. When stacking two devices, the master device drives the COMP signal to the slave, ensuring current sharing between phases. The API feature injects additional pulses during load step-up transients to reduce output voltage undershoot, while body braking shortens the body diode conduction time during step-down transients to minimize overshoot.

Pin Description: TPS543C20RVFT Pin Definition and Functions
Pin Name Type Function
1-4 VIN Power Input supply (4-14V)
5-8 SW Output Switch node — connect to inductor
9-12 PGND Power Power ground
13 BST Power Bootstrap — cap to SW
14 VCC Output Internal 5V LDO output — bypass to GND
15 EN Input Enable — active high
16 PGOOD Output Power good open-drain output
17 VSENSE+ Input Differential remote sense positive
18 VSENSE- Input Differential remote sense negative
19 COMP I/O Error amplifier output / stack share
20 SS Output Soft start — external cap to GND
21 FSW1/FSW0 Input Frequency pin-strap programming
22 VSET1/VSET0 Input Reference voltage pin-strap programming
23 SYNC I/O Clock sync in/out for stacking
24 ILIM Input Current limit set resistor
25-30 AGND/PGND Power Analog and power ground
31-40 VIN/SW/PGND Power Additional power pins
EP Thermal Pad Power Exposed pad — connect to GND plane
Application Scenarios: In which products and applications is TPS543C20RVFT used
  • 12V to 0.8V core power for 200W+ server CPU at 40A per phase
  • Stacked 80A GPU core power delivery with two TPS543C20 devices
  • AI accelerator VDD core rail requiring ultra-fast transient response
  • Network processor 12V-to-1.0V POL with differential remote sensing
  • Data center storage controller high-current DDR5 VDDQ regulation
Alternative Models: What chips are recommended as replacements for TPS543C20RVFT
Manufacturer Part Number Package Notes
TI TPS545B20RVFT LQFN-40 25A variant, same family
Infineon XDPE15284 QFN-56 Digital 80A multi-phase controller
Renesas ISL69260 QFN-56 Digital 60A multi-phase PMBus
Monolithic Power MP87568 QFN-28 30A integrated buck
onsemi NCP53376 QFN-48 60A integrated power stage

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1