Opens in a new tab

TPS55340RTER

5A boost/SEPIC DC-DC converter, 2.7-38V input, integrated MOSFET, 500kHz, VQFN-16

5890

Effective Inventory

Image for reference only

Manufacturer Part:

TPS55340RTER

Package:

VQFN-16 (3.0 × 3.0 × 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS55340RTER is a 5A integrated boost converter from Texas Instruments with a wide input voltage range of 2.7V to 38V. It features an integrated 5A/40mΩ N-channel MOSFET and operates at a fixed 500 kHz switching frequency with optional external synchronization. Packaged in a 16-pin VQFN (RTE) package, it is ideal for boost, SEPIC, and flyback converter topologies.

Key Specifications

Function Boost/SEPIC/Flyback DC-DC Converter
Input Voltage 2.7V to 38V
Output Voltage Up to 38V
Switch Current 5A
Switch RDS(on) 40mΩ
Switching Frequency 500 kHz (fixed)
Package 16-pin VQFN (3.0 × 3.0 mm)
Operating Temperature -40°C to +150°C (TJ)

Features

  • Wide 2.7V to 38V input voltage range
  • Integrated 5A, 40mΩ N-channel MOSFET
  • 500 kHz fixed frequency with external synchronization
  • Programmable soft start and current limit
  • Supports boost, SEPIC, and flyback topologies
  • Thermal shutdown and overcurrent protection

Applications

  • LED backlight drivers
  • Industrial power supplies
  • Automotive battery-powered systems
  • SEPIC converters for battery-powered devices
  • USB Power Delivery boost stages
Product Introduction: TPS55340RTER Product Introduction

The TPS55340 is a monolithic non-synchronous boost converter with an integrated 5A, 40mΩ N-channel MOSFET switch. It supports a wide input voltage range from 2.7V to 38V, making it suitable for a variety of power conversion applications including boost, SEPIC, and flyback topologies. The device operates at a fixed 500 kHz switching frequency that can be synchronized to an external clock, and features programmable soft start, cycle-by-cycle current limit, and thermal shutdown protection. The compact VQFN package minimizes board space while delivering high power density.

Working Principle: TPS55340RTER Working Principle

The TPS55340 uses a current-mode PWM control architecture. An internal error amplifier compares the feedback voltage (FB pin) with an internal 1.204V reference and drives the PWM comparator. The inductor current is sensed and compared against the error amplifier output on a cycle-by-cycle basis to regulate the output voltage. The integrated N-channel MOSFET switches at 500 kHz, and the external Schottky diode provides the rectification path during the off-time. In SEPIC or flyback configurations, the same control loop operates but the energy transfer occurs through a coupling capacitor or flyback transformer respectively. The soft-start function ramps the reference voltage gradually to limit inrush current at startup.

Pin Description: TPS55340RTER Pin Definition and Functions
Pin Name Type Function
1 EN Input Enable — logic high enables the device
2 VIN Power Input supply voltage
3 SW Output Switch node — connect to inductor and Schottky diode
4 SW Output Switch node — connect to inductor and Schottky diode
5 PGND Power Power ground
6 PGND Power Power ground
7 AGND Power Analog ground
8 FB Input Feedback — connect resistor divider from output
9 COMP Output Error amplifier output — connect compensation network
10 SS Output Soft start — connect external capacitor
11 FSYNC Input Frequency sync — apply external clock or tie to VCC
12 VCC Output Internal 5V LDO output — bypass with capacitor
13 ILIM Input Current limit programming resistor
14 PWRGD Output Power good open-drain output
15 PGND Power Power ground
16 SW Output Switch node
Application Scenarios: In which products and applications is TPS55340RTER used
  • 12V/24V to 36V LED backlight driver in industrial displays
  • SEPIC converter for single-cell Li-ion to 12V rail
  • USB PD boost stage from 5V to 9V/15V/20V
  • Automotive battery pre-boost for infotainment systems
  • Industrial 24V to 48V power conversion
Alternative Models: What chips are recommended as replacements for TPS55340RTER
Manufacturer Part Number Package Notes
TI LMR14206 SOT-23-6 Lower current, 42V input boost
TI TPS61175 HTSSOP-14 3A boost, 3-24V input
Monolithic Power MP8759 QFN-16 5A boost converter
Richtek RT8560 WQFN-16 Similar boost converter
Infineon TLE8386 PG-DSO-14 Automotive grade boost

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1