Opens in a new tab

TPS562200DDCT

17V 2A synchronous buck converter, D-CAP2, 650kHz, Eco-mode, SOT-23-6

2409

Effective Inventory

Image for reference only

Manufacturer Part:

TPS562200DDCT

Package:

SOT-23-THN-6 (2.9 × 2.8 × 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS562200DDCT is a 17V input, 2A synchronous step-down (buck) converter from Texas Instruments, packaged in a 6-pin SOT-23-THN (DDC) package measuring 2.9 × 2.8 mm. It employs TI’s D-CAP2 control topology for fast transient response with no external compensation required. The device features Advanced Eco-mode for high light-load efficiency and supports an output voltage range of 0.76V to 7V.

Key Specifications

Function Synchronous Step-Down Converter
Input Voltage 4.5V to 17V
Output Voltage 0.76V to 7V (adjustable)
Output Current 2A
Switching Frequency 650 kHz (fixed)
Control Mode D-CAP2
Quiescent Current 230 µA (typical)
Shutdown Current < 10 µA
High-Side FET RDS(on) 122 mΩ
Feedback Accuracy 1% at 25°C
Package SOT-23-THN-6 (2.9 × 2.8 mm)
Operating Temperature -40°C to +125°C (junction)

Features

  • D-CAP2 control topology for fast transient response without external compensation
  • Advanced Eco-mode pulse-skipping for high light-load efficiency
  • Wide 4.5V to 17V input voltage range
  • Integrated 122 mΩ high-side and 72 mΩ low-side MOSFETs
  • Cycle-by-cycle overcurrent limit with hiccup-mode protection
  • Non-latch OVP, UVLO, and thermal shutdown protection

Applications

  • Set-top boxes and digital TV power supplies
  • Networking and telecom equipment POL regulators
  • Industrial 12V/24V bus point-of-load conversion
  • Consumer electronics battery-powered systems
  • Embedded computing core voltage rails
Product Introduction: TPS562200DDCT Product Introduction

The TPS562200 is a simple, easy-to-use, 2A synchronous step-down converter in a 6-pin SOT-23-THN package. It employs TI’s D-CAP2 control mode, which provides fast transient response and supports low-ESR output capacitors such as specialty polymer and ceramic types without requiring external compensation components. The device operates in Advanced Eco-mode to maintain high efficiency during light-load conditions, with a quiescent current of only 230 µA. Integrated 122 mΩ and 72 mΩ MOSFETs enable efficient power delivery from a 4.5V to 17V input to an adjustable output from 0.76V to 7V at up to 2A.

Working Principle: TPS562200DDCT Working Principle

The TPS562200 uses the D-CAP2 (Direct Capacitor-Area Proportional 2) control architecture, which is a pseudo-fixed-frequency adaptive on-time control scheme. The internal on-time timer sets the high-side MOSFET on-duration proportional to the input voltage and inversely proportional to the output voltage, maintaining a near-constant 650 kHz switching frequency. The output voltage is sensed through a feedback resistor divider and compared against an internal 0.76V reference. When the feedback voltage falls below the reference, a new on-time pulse is initiated. An internal ripple injection network eliminates the need for large output capacitance with high ESR, allowing the use of all-ceramic output capacitors. The Eco-mode operation disables switching when the output voltage is above the set point at light loads, skipping pulses to reduce switching losses and maintain high efficiency.

Pin Description: TPS562200DDCT Pin Definition and Functions
Pin Name Type Function
1 BOOT Power Bootstrap — connect 0.1µF cap to SW
2 VIN Power Input supply voltage (4.5-17V)
3 EN Input Enable — float or tie to VIN for auto-startup
4 FB Input Feedback — connect resistor divider from output
5 MODE Input Mode selection — Eco-mode or FCCM operation
6 GND Power Ground (connected to exposed thermal pad)
Application Scenarios: In which products and applications is TPS562200DDCT used
  • 12V to 1.2V/1.5V core rail in set-top box SoC power
  • 5V to 3.3V POL regulator in networking equipment
  • 12V to 5V intermediate bus conversion in industrial systems
  • Portable instrument battery-powered step-down regulator
  • Embedded computing DDR memory VDDQ (1.35V) rail
Alternative Models: What chips are recommended as replacements for TPS562200DDCT
Manufacturer Part Number Package Notes
TI TPS563200DDCT SOT-23-6 3A version, same family
TI TPS562208DDCR SOT-23-6 Internal compensation variant
Monolithic Power MP8759 QFN-12 2A buck, 18V input
Richtek RT6202 SOT-23-6 2A, 18V, similar footprint
Silergy SY8123 SOT-23-6 2A, 18V buck converter

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1