Opens in a new tab

TPS60400DBVT

60mA charge pump voltage inverter, 1.6-5.5V input, PowerSave, SOT-23-5

3424

Effective Inventory

Image for reference only

Manufacturer Part:

TPS60400DBVT

Package:

SOT-23-5 (DBV) (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS60400DBVT from Texas Instruments is an unregulated 60mA charge pump voltage inverter that generates a negative output voltage from a positive input ranging from 1.6V to 5.5V. Requiring only three small 1uF ceramic capacitors, it provides a compact and efficient solution for generating negative supply rails. The TPS60400 variant features a PowerSave mode that improves efficiency at low output currents. It is housed in a 5-pin SOT-23 package suitable for space-constrained applications.

Key Specifications

Input Voltage 1.6V to 5.5V
Output Current Up to 60mA
Output Voltage -VIN (unregulated inverted output)
Quiescent Current 65uA typical
PowerSave Mode Yes (TPS60400 variant)
External Capacitors 3 x 1uF ceramic
Output Resistance 12 Ohm typical
Operating Temperature -40 to 85°C
Package SOT-23-5 (DBV)
Packaging Tape & Reel

Features

  • Inverts input supply voltage to generate negative rail
  • PowerSave mode for improved efficiency at low output currents
  • Only three 1uF ceramic capacitors required
  • Integrated active Schottky diode for start-up into load
  • Wide input voltage range: 1.6V to 5.5V
  • Low quiescent current: 65uA typical
  • Complete inverter fits in 50mm2 board area
  • Small 5-pin SOT-23 package

Applications

  • LCD bias voltage generation
  • GaAs RF power amplifier bias
  • Portable instrument sensor supply
  • Bipolar op-amp negative rail generation
  • Medical instrument power supplies
Product Introduction: TPS60400DBVT Product Introduction

The TPS60400DBVT from Texas Instruments is a charge pump voltage inverter that efficiently generates a negative output voltage from a positive input supply. Requiring only three small 1uF ceramic capacitors, it provides the simplest possible solution for generating a negative rail in battery-powered and portable systems. The PowerSave mode (specific to the TPS60400 variant within the TPS6040x family) reduces switching frequency at light loads, significantly improving efficiency when the output current demand is low. The integrated active Schottky diode eliminates the external diode typically needed for start-up into a load, further reducing component count and board space.

Working Principle: TPS60400DBVT Working Principle

The TPS60400 uses a switched-capacitor charge pump to invert the input voltage. The circuit operates in two phases per switching cycle. During the charge phase, an internal flying capacitor (CFLY, external 1uF) is connected between VIN and GND, charging it to approximately VIN. During the transfer phase, CFLY is reconnected with its positive terminal to GND and negative terminal to the output, transferring charge to the output capacitor (COUT, external 1uF). This produces a negative voltage at the output, approximately -VIN plus the voltage drop across the switch resistance (approximately 12 Ohm typical). The TPS60400’s PowerSave mode monitors the output voltage and reduces the switching frequency when the output is lightly loaded, maintaining regulation while minimizing quiescent current. The input bypass capacitor (CIN, external 1uF) decouples the switching transients from the source supply.

Pin Description: TPS60400DBVT Pin Definition and Functions
Pin Name Type Function
1 OUT Output Negative output voltage
2 IN Power Input supply (1.6-5.5V)
3 CFLY+ Flying Cap Flying capacitor positive terminal
4 GND Ground Ground reference
5 CFLY- Flying Cap Flying capacitor negative terminal
Application Scenarios: In which products and applications is TPS60400DBVT used
  • LCD display bias voltage generation for portable devices
  • RF GaAs power amplifier negative gate bias supply
  • Bipolar operational amplifier negative rail from single battery
  • Medical instrument sensor bias requiring dual-rail supply
  • Audio amplifier split-rail supply from single Li-Ion cell
Alternative Models: What chips are recommended as replacements for TPS60400DBVT
Manufacturer Part Number Package Notes
TI TPS60401DBVT SOT-23-5 Fixed 20kHz frequency, no PowerSave
TI TPS60402DBVT SOT-23-5 Fixed 50kHz frequency variant
TI LM27761 WSON-8 Regulated -5V output, 250mA, low noise
ADI ADM660 SOIC-8 50mA, 1.5-5.5V, inverter/doubler
Microchip TC7662B SOIC-8 20mA, 1.5-15V, voltage inverter

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1